Nema 17 Closed Loop Stepper Motor, 2 Phase, 2A, 0.72N·m

$100.39
Lightweight Nema 17 closed loop hybrid stepper motor at affordable price, with encoder for 3D printer, CNC machine and robotics projects, two phase four wire, step angle 1.8°, rated current 2A, motor length 60mm, maximum holding torque 0.72N·m, low noise and high torque.
SKU: ATO-STEP-17CC200
*
Free Shipping
Delivery date: 6-12 days

ATO closed loop stepper motor is a bipolar electric motor that converts electrical pulse signal into corresponding angular displacement or linear displacement. This permanent magnet stepper motor is widely used in electronics manufacturing, sewing machine, semiconductor equipment, laser cutting, and robotics projects, etc.

Physical Specification

  • Model Number: ATO-FY42EC200BC1
  • Matched the Driver Model: ATO-FYDB504T
  • Flanged Size: 42 x 42mm (Nema 17)
  • Motor Length: 80mm
  • Shaft Diameter: 5mm
  • Number of Leads: 4 wire
  • Weight: 0.5kg

Electrical Specification

  • Motor Type: Bipolar Closed Loop Stepper
  • Step Angle: 1.8°
  • Rated Current: 2A
  • Holding Torque: 0.72 N·m (72 N·cm, 102 Oz.in)
  • Phase Resistance: 1.75Ω
  • Phase Inductance: 4mH
  • Rotor Inertia: 110g·cm2
  • Encoder: A, B two-channel signal, 1000ppr (default)/2500ppr, 5V DC power supply

Dimensions (Unit: mm)

L=80mm

Dimensions of Nema 17 2 Phase Closed Loop Stepper Motor

Wiring Diagram

Wiring Diagram of Nema 17 2 Phase Closed Loop Stepper Motor

Speed-Torque Curve Diagram

Speed Torque Curve Diagram of Nema 17 2 Phase Closed Loop Stepper Motor

Details

Nema 17 Closed Loop Stepper Motor 0.4N·m-0.75N·m Details

Tips: The difference between stepper motor and other control motors

The biggest difference between a low cost stepper motor and other control motors is that the stepper motor receives a digital control signal (electric pulse signal) and converts it into an angular displacement or linear displacement corresponding to it. It itself is an executive element that completes the digital mode conversion. Moreover, it can be open-loop position control, input a pulse signal to get a prescribed position increment. Compared with the traditional DC control system, best stepper motor has a significantly lower cost and almost no system adjustment is required. The angular displacement of the stepper motor is strictly proportional to the number of pulses input, and it is synchronized with the pulse in time. Therefore, as long as the number of pulses, frequency and phase sequence of the motor windings are controlled, the required rotation angle, speed and direction can be obtained.

How to control a stepper motor using a PLC and HMI?
This video shows you how to configure a PLC, HMI, motor driver, and proximity sensor to perform Origin Return (OPR) control of a stepper motor.

Common Stepper Motor Troubleshooting Problems and Tips
In this video, 9 common problems that can occur with stepper motors are discussed, and expert advice is provided for diagnosing and effectively resolving these problems. If you have ever experienced problems with your stepper motor or want to be prepared for any future problems, this video is a must watch.

Controlling Stepper Motors with HMI and PLC for Fixed Cycle Power Delivery
In this video, we explore the step-by-step process of configuring an HMI and PLC to synchronize and manage specific cycle lengths of stepper motors, ensuring accurate power delivery.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

In the case of non-overload, the speed and stop position of the motor only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. That is, when a pulse signal is added to the motor, the motor rotates through a step angle. The existence of this linear relationship, coupled with the characteristics of the stepper motor having only periodic errors and no cumulative errors. This makes it very simple to use stepper motors to control the speed, position and other control fields.

Warranty

360 Days warranty

Thank you for buying industrial automation products on ATO.com, all products sold by ATO and the partner cover a 360-days-warranty, effective from the date of receiving the products.

What is covered?

ATO is responsible for providing free spare parts, free technical support to assist the customer to repair the defective products until the problem is solved.

What is not covered?

  • Product purchased from anyone other than ATO store or a ATO authorized reseller.
  • Expendable parts.
  • Routine cleaning or normal cosmetic and mechanical wear.
  • Damage from misuse, abuse or neglect.
  • Damage from use of parts other than ATO approved.
  • Damage from use outside the product’s usage or storage parameters.
  • Damage from use of parts not sold by ATO.
  • Damage from modification or incorporation into other products.
  • Damage from repair or replacement of warranted parts by a service provider other than a ATO authorized service provider.
  • Damage caused by the application environment not meeting the product usage requirements and the failure to perform preventive maintenance.
Product reviews
I’ll be ordering more!
5
Juan
Avatar
3/16/2022 8:29 PM
I bought a bunch of ATO Nema 17 closed loop stepper motors to replace the old ones and I am glad I did. These run so quiet and cool especially with stepper drivers! I’ll be ordering more!
Was this review helpful? Yes No (0/0)
Amazing product
5
Paulo
Avatar
5/22/2022 9:41 PM
I've had this nema 17 stepper motor for a while now and have had 0 issues. It is working amazingly well, and has plenty of power to push filament through.
Was this review helpful? Yes No (0/0)
No complaints.
5
Stallings
Avatar
6/28/2022 8:18 PM
I needed a stepper motor for my ender 3 Pro extruder upgrade, so I purchase this one. This Nema 17 Closed Loop stepper motor works great for my application. Runs cool and quiet. I have no complaints. Will buy more.
Was this review helpful? Yes No (0/0)
Great closed loop stepper motor for direct drive.
5
Annette
Avatar
7/25/2022 7:36 PM
I needed a stepper motor for my Ender 3 Pro extruder upgrade, so I bought this one. This Nema 17 stepper motor was pretty much plug and play. Works great and runs cool and quiet. I will buy more.
Was this review helpful? Yes No (0/0)
Good powerful Nema 17 stepper motor.
5
Tammie
Avatar
7/26/2022 2:29 AM
This closed loop Nema 17 stepper motor with plenty of power and does exactly what I need it to do. Quiet, no issues so far, very happy with my purchase.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

ATO closed loop stepper motor is a bipolar electric motor that converts electrical pulse signal into corresponding angular displacement or linear displacement. This permanent magnet stepper motor is widely used in electronics manufacturing, sewing machine, semiconductor equipment, laser cutting, and robotics projects, etc.

Physical Specification

  • Model Number: ATO-FY42EC200BC1
  • Matched the Driver Model: ATO-FYDB504T
  • Flanged Size: 42 x 42mm (Nema 17)
  • Motor Length: 80mm
  • Shaft Diameter: 5mm
  • Number of Leads: 4 wire
  • Weight: 0.5kg

Electrical Specification

  • Motor Type: Bipolar Closed Loop Stepper
  • Step Angle: 1.8°
  • Rated Current: 2A
  • Holding Torque: 0.72 N·m (72 N·cm, 102 Oz.in)
  • Phase Resistance: 1.75Ω
  • Phase Inductance: 4mH
  • Rotor Inertia: 110g·cm2
  • Encoder: A, B two-channel signal, 1000ppr (default)/2500ppr, 5V DC power supply

Dimensions (Unit: mm)

L=80mm

Dimensions of Nema 17 2 Phase Closed Loop Stepper Motor

Wiring Diagram

Wiring Diagram of Nema 17 2 Phase Closed Loop Stepper Motor

Speed-Torque Curve Diagram

Speed Torque Curve Diagram of Nema 17 2 Phase Closed Loop Stepper Motor

Details

Nema 17 Closed Loop Stepper Motor 0.4N·m-0.75N·m Details

Tips: The difference between stepper motor and other control motors

The biggest difference between a low cost stepper motor and other control motors is that the stepper motor receives a digital control signal (electric pulse signal) and converts it into an angular displacement or linear displacement corresponding to it. It itself is an executive element that completes the digital mode conversion. Moreover, it can be open-loop position control, input a pulse signal to get a prescribed position increment. Compared with the traditional DC control system, best stepper motor has a significantly lower cost and almost no system adjustment is required. The angular displacement of the stepper motor is strictly proportional to the number of pulses input, and it is synchronized with the pulse in time. Therefore, as long as the number of pulses, frequency and phase sequence of the motor windings are controlled, the required rotation angle, speed and direction can be obtained.

Product reviews
I’ll be ordering more!
5
Juan
Avatar
3/16/2022 8:29 PM
I bought a bunch of ATO Nema 17 closed loop stepper motors to replace the old ones and I am glad I did. These run so quiet and cool especially with stepper drivers! I’ll be ordering more!
Was this review helpful? Yes No (0/0)
Amazing product
5
Paulo
Avatar
5/22/2022 9:41 PM
I've had this nema 17 stepper motor for a while now and have had 0 issues. It is working amazingly well, and has plenty of power to push filament through.
Was this review helpful? Yes No (0/0)
No complaints.
5
Stallings
Avatar
6/28/2022 8:18 PM
I needed a stepper motor for my ender 3 Pro extruder upgrade, so I purchase this one. This Nema 17 Closed Loop stepper motor works great for my application. Runs cool and quiet. I have no complaints. Will buy more.
Was this review helpful? Yes No (0/0)
Great closed loop stepper motor for direct drive.
5
Annette
Avatar
7/25/2022 7:36 PM
I needed a stepper motor for my Ender 3 Pro extruder upgrade, so I bought this one. This Nema 17 stepper motor was pretty much plug and play. Works great and runs cool and quiet. I will buy more.
Was this review helpful? Yes No (0/0)
Good powerful Nema 17 stepper motor.
5
Tammie
Avatar
7/26/2022 2:29 AM
This closed loop Nema 17 stepper motor with plenty of power and does exactly what I need it to do. Quiet, no issues so far, very happy with my purchase.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews