Closed loop bipolar stepper motor is a permanent magnet electric motor that converts electrical pulse signal into corresponding angular displacement or linear displacement. It is widely used in electronics manufacturing, sewing machine, semiconductor equipment, laser cutting, textile machinery and so on.
Physical Specification
- Model Number: ATO-FY42EL200BC1
- Matched the Driver Model: ATO-FYDB504T
- Flanged Size: 42 x 42mm (Nema 17)
- Motor Length: 68mm
- Shaft Diameter: 5mm
- Number of Leads: 4 wire
- Weight: 0.36kg
Electrical Specification
- Motor Type: Bipolar Closed Loop Stepper
- Step Angle: 1.8°
- Rated Current: 2A
- Holding Torque: 0.5N·m (50 N·cm, 72 Oz.in)
- Phase Resistance: 1.35Ω
- Phase Inductance: 2.8mH
- Rotor Inertia: 77g·cm2
- Encoder: A, B two-channel signal, 1000ppr (default)/2500ppr, 5V DC power supply
Dimensions (Unit: mm)
L=68mm

Wiring Diagram

Speed-Torque Curve Diagram

Details

Tips: Reasons for stepper motor out of step
- The speed is set too high and the torque is not enough.
- The voltage is unstable during high-speed operation, so that the input current sometimes does not reach the rated current. It causes the output torque to drop, and finally leads to out of step.
- The speed rises or falls too fast, causing the loss of step.
- Excessive external resistance.
Product reviews
So little money for such a good motor.
Janette
3/14/2022 1:54 AM
This is a high quality Nema 17 hybrid stepper motor, smooth with lots of torque. Works and fit perfectly. Very happy with this.
Was this review helpful? (0/0)
Excellent motor for 3D printers.
Annette
4/13/2022 7:30 PM
I used this Nema 17 closed loop stepper motor for replacing old stepper of 3D printer. This is a stepper motor and it only costs a little bit. Great value for its quality and performance. Works great and very quiet. I will buy from ATO again.
Was this review helpful? (0/0)
Works great on my applications.
Janette
6/28/2022 8:22 PM
Very well packaged, everything as expected. I’m using this NEMA 17 closed loop stepper motor to open and close my blinds. So far, it seems to be working as anticipated. I will most definitely buy more.
Was this review helpful? (0/0)
Great quiet light stepper motor for my extruder.
Mubarak
7/25/2022 9:21 PM
This closed loop Nema 17 stepper motor arrived on time in good shape. I used it to replace my old one. I did a step calibration and was back in business. This stepper motor worked great and I will buy more if I need.
Was this review helpful? (0/0)
For the price, it is great.
Vernon
7/26/2022 2:16 AM
I ordered this closed loop Nema 17 stepper motor, great quality packaging, good motor. I am pleased with it. So much better than the others. For the price, it is great.
Was this review helpful? (0/0)
Only registered users can write reviews