Nema 14 Stepper Motor Linear Actuator, 2 phase, 2.7V, 1A

$139.46
The 1A 2.7V stepper motor linear actuator comes in Nema 14 frame size, 2 phase 4 wire, 1.8 deg. step angle (200 steps/rev), providing higher performance and lower consumption. Two motor types external shaft and non-captive shaft are available.
SKU: ATO-STEP-L271
*
*
Free Shipping
Delivery date: 6-12 days

This Nema 14 stepper motor linear actuator has 2 phase stepper motor and lead screw, available in external shaft style and non-captive shaft style version. Rated current of 1A and rated voltage of 2.7V, there are 9 different lead screw specifications for selection.

Stepper Motor Linear Actuator Parameters

Model TypeExternal ShaftNon-Captive Shaft
35H34-1004AST35H34-1004GTS
Weight3 kg
Length34 mm
Phase2 phase
Step Angle1.8°
Rated Voltage2.7 V
Rated Current1 A
Resistance2.7 Ω
Holding Torque17 Oz-in
Number of Leads4
Rotor Inertia14 g-cm2

Select Leadscrew

Choose your stepper motor linear actuator screw from one of the available options:

Screw DiameterLeadTravel Per 1.8 Step
(in)(mm)(in/rev)(mm/rev)(in/step)(mm/step)
0.31580.07920.000390.01
0.31580.15740.000790.02
0.31580.31580.001570.04
Note: Screw of 8mm diameter is made of copper.

Stepper Motor Linear Actuator Dimension (Unit=mm)

1. Non-captive shaft style

nema 14 non captive shaft stepper motor linear actuator dimension

L=34mm

2. External shaft style

nema 14 external shaft stepper motor linear actuator dimension

L=34mm

Details

2.7V Stepper Motor Linear Actuator Details

Tips: Stepper linear actuator can normally start impulse frequency in no load conditions
Stepper motor linear actuator can normally start impulse frequency in no load conditions. If the pulse frequency is higher than the value, the motor can be started, but the lost step or a plug may occur. The start frequency should be lower in the load condition. If the motor is to be rotated at a high speed, the pulse frequency should have an acceleration process. The starting frequency is low and it  then will reach the expected high frequency according to the fixed acceleration.

ATO external stepper linear actuator in this video is 2 phase 4 wire comes in Nema 23 frame size. We will show you how to use PLC connect to the hybrid stepper motor system, and control this external stepper motor linear actuator for simple forward and reverse motion by the pulse and direction command issued by PLC.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Calculation of Lead Screw and Stepper Motor

This video introduces the calculation of stepper motor. You need to know the step angle of the stepper motor and the pitch of the lead screw as well as the number of threads and subdivisions of the driver.

Rotation Angle Control of Stepper Motor

The angle control principle of stepper motor is to control the number of pulse outputs of PLC.

1. The output frequency of PLC is related to the speed of motor.

2. Pay attention to the dip switch on the stepper motor driver, which should match the current of stepper motor, and pay attention to how many pulses control the stepper motor to rotate one circle.

In the case of non-overload, the speed and stop position of the motor only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. That is, when a pulse signal is added to the motor, the motor rotates through a step angle. The existence of this linear relationship, coupled with the characteristics of the stepper motor having only periodic errors and no cumulative errors. This makes it very simple to use stepper motors to control the speed, position and other control fields.

Product reviews
Can stepper motor exert the force of 5KN?
5
lolly
Avatar
7/26/2023 9:56 PM
Hello.
Can I have the stepper motor, which exerts the force of 5KN with a trapezoidal lead screw?
Was this review helpful? Yes No (0/0)
ATO Responded
The stepper motor you are looking at cannot apply such a large force of 5000N.
In order to recommend a suitable motor for you, what kind of load equipment is this Stepper Motor used for?
How is your stepper motor connected to the load?
What are your requirements for screw stroke, speed, and accuracy?
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

This Nema 14 stepper motor linear actuator has 2 phase stepper motor and lead screw, available in external shaft style and non-captive shaft style version. Rated current of 1A and rated voltage of 2.7V, there are 9 different lead screw specifications for selection.

Stepper Motor Linear Actuator Parameters

Model TypeExternal ShaftNon-Captive Shaft
35H34-1004AST35H34-1004GTS
Weight3 kg
Length34 mm
Phase2 phase
Step Angle1.8°
Rated Voltage2.7 V
Rated Current1 A
Resistance2.7 Ω
Holding Torque17 Oz-in
Number of Leads4
Rotor Inertia14 g-cm2

Select Leadscrew

Choose your stepper motor linear actuator screw from one of the available options:

Screw DiameterLeadTravel Per 1.8 Step
(in)(mm)(in/rev)(mm/rev)(in/step)(mm/step)
0.31580.07920.000390.01
0.31580.15740.000790.02
0.31580.31580.001570.04
Note: Screw of 8mm diameter is made of copper.

Stepper Motor Linear Actuator Dimension (Unit=mm)

1. Non-captive shaft style

nema 14 non captive shaft stepper motor linear actuator dimension

L=34mm

2. External shaft style

nema 14 external shaft stepper motor linear actuator dimension

L=34mm

Details

2.7V Stepper Motor Linear Actuator Details

Tips: Stepper linear actuator can normally start impulse frequency in no load conditions
Stepper motor linear actuator can normally start impulse frequency in no load conditions. If the pulse frequency is higher than the value, the motor can be started, but the lost step or a plug may occur. The start frequency should be lower in the load condition. If the motor is to be rotated at a high speed, the pulse frequency should have an acceleration process. The starting frequency is low and it  then will reach the expected high frequency according to the fixed acceleration.

Product reviews
Can stepper motor exert the force of 5KN?
5
lolly
Avatar
7/26/2023 9:56 PM
Hello.
Can I have the stepper motor, which exerts the force of 5KN with a trapezoidal lead screw?
Was this review helpful? Yes No (0/0)
ATO Responded
The stepper motor you are looking at cannot apply such a large force of 5000N.
In order to recommend a suitable motor for you, what kind of load equipment is this Stepper Motor used for?
How is your stepper motor connected to the load?
What are your requirements for screw stroke, speed, and accuracy?
Only registered users can write reviews