Nema 11 Stepper Motor Linear Actuator, 2 phase, 4.4V, 0.96A

$166.08
High performance driving units, which combines 2-phase Nema 11 stepper motor and 8mm diameter and 8mm/rev lead screw to eliminate coupling. The 0.96A 4.4V stepper motor linear actuator has external shaft style and non-captive shaft style for your selection.
SKU: ATO-STEP-L44096
*
Free Shipping
Delivery date: 6-12 days

Nema 11 Stepper Motor Linear Actuator with 4.4V rated voltage and 0.96A rated current, holding torque of 12.5 Oz-in, precision leadscrew and higher IP protection. It is widely used in many applications such as X-Y tables, optical scanning equipment, medical valve and pump equipment etc.

Stepper Motor Linear Actuator Specification

Model TypeExternal ShaftNon-Captive Shaft
28H45-0674AST28H45-0674GTS
Weight3 kg
Length45 mm
Screw Diameter8 mm (0.315 inch)
Screw Lead8 mm/rev (0.315 inch/rev)
Travel Per 1.8 Step0.04 mm/step (0.00157 inch/step)
Phase2 phase
Step Angle1.8°
Rated Voltage4.4 V
Rated Current0.96 A
Resistance4.6 Ω
Holding Torque12.5 Oz-in
Number of Leads6
Rotor Inertia18 g-cm2

Stepper Motor Linear Actuator Dimension (Unit=mm)

1. Non-captive shaft style

nema 11 non captive shaft stepper motor linear actuator dimension

L=45mm

2. External shaft style

nema 11 external shaft stepper motor linear actuator dimension

L=45mm

Details

4.4V Stepper Motor Linear Actuator Details

Tips: Stepper motor linear actuator in machine tool device
The application of stepper motor linear actuator in machine tool device can guarantee a high performance level and has simpler motor drive device that transforms rotatory movement into linear motion compared with traditional motor drive device. Because the linear motor is directly connected with the moving load, there is no back clearance between motor and load and the compliance is small.
1. Linear drive device can easily achieve the speed of minimum of 1um/s and maximum of 5m/s. The linear drive system can guarantee a constant speed characteristic, with a speed deviation of 0.01%. In applications which require higher accelerated speed, smaller linear stepper motors can easily provide accelerated speed greater than 10g while traditional motor generally produces accelerated speed within the range of 1g.
2. The stepper linear actuator has a simple structure and is composed of few components, so it needs less lubrication. It means that it has a longer service life and a relatively clean operation. In comparison, the traditional drive system consists of more than 20 components, including motor, coupling, ball screw, U block, bearing, bolster and lubrication system.

ATO external stepper linear actuator in this video is 2 phase 4 wire comes in Nema 23 frame size. We will show you how to use PLC connect to the hybrid stepper motor system, and control this external stepper motor linear actuator for simple forward and reverse motion by the pulse and direction command issued by PLC.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Calculation of Lead Screw and Stepper Motor

This video introduces the calculation of stepper motor. You need to know the step angle of the stepper motor and the pitch of the lead screw as well as the number of threads and subdivisions of the driver.

Rotation Angle Control of Stepper Motor

The angle control principle of stepper motor is to control the number of pulse outputs of PLC.

1. The output frequency of PLC is related to the speed of motor.

2. Pay attention to the dip switch on the stepper motor driver, which should match the current of stepper motor, and pay attention to how many pulses control the stepper motor to rotate one circle.

In the case of non-overload, the speed and stop position of the motor only depend on the frequency and pulse number of the pulse signal, and are not affected by the load change. That is, when a pulse signal is added to the motor, the motor rotates through a step angle. The existence of this linear relationship, coupled with the characteristics of the stepper motor having only periodic errors and no cumulative errors. This makes it very simple to use stepper motors to control the speed, position and other control fields.

Product reviews
Question for linear stepper motor
5
Cordell
Avatar
10/28/2019 7:14 PM
Can we add lead screw for your Nema 11 non captive shaft linear stepper motor if we ordered one?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, sure you can.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Nema 11 Stepper Motor Linear Actuator with 4.4V rated voltage and 0.96A rated current, holding torque of 12.5 Oz-in, precision leadscrew and higher IP protection. It is widely used in many applications such as X-Y tables, optical scanning equipment, medical valve and pump equipment etc.

Stepper Motor Linear Actuator Specification

Model TypeExternal ShaftNon-Captive Shaft
28H45-0674AST28H45-0674GTS
Weight3 kg
Length45 mm
Screw Diameter8 mm (0.315 inch)
Screw Lead8 mm/rev (0.315 inch/rev)
Travel Per 1.8 Step0.04 mm/step (0.00157 inch/step)
Phase2 phase
Step Angle1.8°
Rated Voltage4.4 V
Rated Current0.96 A
Resistance4.6 Ω
Holding Torque12.5 Oz-in
Number of Leads6
Rotor Inertia18 g-cm2

Stepper Motor Linear Actuator Dimension (Unit=mm)

1. Non-captive shaft style

nema 11 non captive shaft stepper motor linear actuator dimension

L=45mm

2. External shaft style

nema 11 external shaft stepper motor linear actuator dimension

L=45mm

Details

4.4V Stepper Motor Linear Actuator Details

Tips: Stepper motor linear actuator in machine tool device
The application of stepper motor linear actuator in machine tool device can guarantee a high performance level and has simpler motor drive device that transforms rotatory movement into linear motion compared with traditional motor drive device. Because the linear motor is directly connected with the moving load, there is no back clearance between motor and load and the compliance is small.
1. Linear drive device can easily achieve the speed of minimum of 1um/s and maximum of 5m/s. The linear drive system can guarantee a constant speed characteristic, with a speed deviation of 0.01%. In applications which require higher accelerated speed, smaller linear stepper motors can easily provide accelerated speed greater than 10g while traditional motor generally produces accelerated speed within the range of 1g.
2. The stepper linear actuator has a simple structure and is composed of few components, so it needs less lubrication. It means that it has a longer service life and a relatively clean operation. In comparison, the traditional drive system consists of more than 20 components, including motor, coupling, ball screw, U block, bearing, bolster and lubrication system.

Product reviews
Question for linear stepper motor
5
Cordell
Avatar
10/28/2019 7:14 PM
Can we add lead screw for your Nema 11 non captive shaft linear stepper motor if we ordered one?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, sure you can.
Only registered users can write reviews