After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.
Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.
A micro load cell is a commonly used measuring tool that converts weight into electrical signal output to facilitate accurate weighing and measurement. The sensor features stainless steel construction and is based on strain measurement technology with an accuracy of up to 0.3 F.S. Micro load cells have capacity range from 5kg, 10kg, 20kg, 30kg, 50kg, 100kg, 200kg, 300kg, 500kg to 1000kg. Load cell capacity can be customized according to customer requirements.
Specification
| Model | ATO-LCBU-DYHW-120 |
| Shipping Weight | 1.5kg |
| Capacity Range * | 5~1000kg |
| Matched Display Controller | ATO-DDC5-CHB (Click it to the controller page) |
| Matched Transmitter | ATO-LCTR-OA (Click it to the transmitter page) |
| Accuracy | 0.3%F.S (linearity + hysteresis + repeatability) |
| Sensitivity | 2.0±10%mV/V (Low range variations may differ) |
| Creep | ±0.03%F.S/30min |
| Zero Output | ±2%F.S |
| Temperature Effect on Zero | ±0.1%F.S/10℃ |
| Temperature Effect on Output | ±0.1%F.S/10℃ |
| Operating Temperature | -20℃~+80℃ |
| Input Impedance | 1000Ω |
| Output Impedance | 1000Ω |
| Insulation Resistance | ≥5000MΩ |
| Safety Overload | 150%F.S |
| Bridge Voltage (excitation voltage) | DC 5-10V |
| Material | Stainless steel |
| Protection Class | IP66 |
| Cable Length | 2m |
| Wiring | EXC+: Red, EXC-: Black, SIG+: Green, SIG-: White |
Feature

- Compact & Durable: Small, versatile design with robust 17-4 PH stainless steel construction for easy integration and long-term strength.
- High Precision: Delivers consistent, accurate measurements with a reliable sensing chip.
- Stable Performance: Withstands harsh conditions, offering long-lasting, dependable results.
- Easy Setup: Quick, hassle-free installation with superior wiring for durable signal transmission.
Dimension (unit: mm)


Wiring Method

Application

Tips: What are common failures of the Compression Button Load Cell?
Common failures include:
- Signal instability: This can be caused by damaged cables, loose connectors or power fluctuations.
- Zero drift: This can be caused by prolonged use, overload or temperature changes.
Sensor damage: Excess load or physical shock may cause damage to the sensor.
Can you send manual mounting for a load cell ATO-LC-BU04?
Please provide more details on the following:
Specific-type of stainless steel used.
Surface treatment procedure; case hardening, quenching, annealing, normalizing, etc.
When it arrived, we noticed the deviation between the second one (black cable) and the first one we ordered (orange cable) based on the top face profile.
Are they different loadcells rated at different capacities?
Which one can we expect when ordering more in the future?
Please provide an explanation.
Thank you.
Also, What would be the best way to calibrate it?
Please provide us a tolerance for this dimension that these loadcells are kept to so we can further design around it.
i.e. Vout @3.3Vexc would be equivalent to 0.66 * Vout@5Vexc
Our signal amplifier provides 2000x Would this load cell be usable?