Hall Magnetic Proximity Sensor, M18, NPN/ PNP, NO/NC

$95.89
Hall magnetic proximity sensor for sale online, features an M18 threaded design and supports NPN NO/NC or PNP NO/NC signal output. It is flush type installation and has a detection distance of 15mm. The sensor operates on a 10–30 VDC supply voltage, comes with a durable nickel copper alloy housing, and is equipped with a 2-meter PVC cable for easy connection.
SKU: ATO-MPS-M18
*
Free Shipping
Delivery date: 6-12 days

Low cost M18 thread magnetic proximity sensor is divided into normally open and normally closed, and the output signals are NPN and PNP. It is small size and corrosion resistance, which can be used in poor work environment.

Features

  • The detection distance of the Hall magnetic proximity sensor is determined by the target magnetic field strength.
  • It has a long service life and high reliability.
  • Its yellow LED indicator allows users to easily check the working status of the sensor.
  • The sensor is economical and easy to operate.
  • Its protection level reaches IP67 (IEC standard), which is dustproof and waterproof.

Specification

ModelATO-FN18D
Signal Output (Optional)NPN NO, NPN NC, PNP NO, PNP NC
Detection Distance15mm
Installation TypeFlush
Supply Voltage10~30 VDC
Switch Point Offset≤+10%
Hysteresis Range3~20%
Repetitive Error≤3%
Load Current≤200mA
Residual Voltage≤2.5VDC
Circuit ProtectionSurge Protection, Short Circuit Protection, Overload Protection, Reverse Polarity Protection
IndicatorYellow LED
Consumption Current≤15mA
Ambient Temperature-25~70℃
Environment Humidity35~95RH%
Switching Frequency200Hz
Withstand Voltage1000/AC 50/60Hz 60s
Insulation Resistance≥50MΩ (500VDC)
Vibration ResistantComplex Amplitude 1.5mm 10~50Hz (2 hours each in X, Y, and Z directions)
Protection DegreeIP67
DimensionM18*1*40
Housing MaterialNickel Copper Alloy
Connection Type2m PVC Cable
Weight1kg


Dimensions (Unit: mm)

Dimensions of M18 Magnetic Proximity Sensor

Wiring Diagram

NPN

Wiring Diagram of M18 NPN Magnetic Proximity Sensor

PNP

Wiring Diagram of M18 PNP Magnetic Proximity Sensor

Tips: Types of magnetic proximity sensor

  • Hall magnetic proximity sensor
    The Hall proximity sensor has the characteristics of no electric shock, low power consumption, long service life and high response frequency. The interior is integrated with epoxy resin, so it can work reliably in various harsh environments. Hall proximity switches can be used in position switches, pressure switches, odometers, etc., as a new type of electrical accessories.
    Hall proximity switches are suitable for position determination of pneumatic, hydraulic, cylinder and piston pumps, and can also be used as limit switches. When the magnetic target approaches, the Hall effect is generated, and the output switching signal is amplified. Compared with inductive sensors, it has the following advantages: it can be installed in metal, can be installed closely side by side, and can detect through metal. The disadvantage is: the distance is affected by the strength of the magnetic field and the approaching direction of the detection body, there may be two working points, and iron materials are not allowed to be used for fixing.
  • Magnetic reed proximity sensor
    The internal structure of a magnetic reed switch is similar to what is commonly referred to as a reed relay. It is a contact sensor consisting of two high-permeability alloy reeds sealed in a glass tube filled with an inert gas. A certain overlap and proper gap are maintained between the two reeds, the ends are gold-plated as contacts, and the leads are welded outside the tube. When the magnetic field strength at the position of the reed switch is large enough to make the magnetic attraction generated by the magnetization of the contact spring pieces overcome the elastic force of the spring pieces, the two spring pieces attract each other to make the contacts conduct. When the magnetic field is weakened to a certain extent, it is released by the elastic force of the spring sheet itself. Small size, small inertia, and fast action are the outstanding features of magnetic reed switches.

In this video, ATO will show you top ten most used sensors (sensing technologies).

In this video, ATO will show you the differences between inductive and magnetic.

Product reviews
Very satisfied with shopping
5
Harrell
Avatar
2/7/2022 8:01 PM
This is a shopping trip I am very satisfied with. The appearance is very beautiful. I just received it, haven't used it yet, will review again after using it.
Was this review helpful? Yes No (0/0)
Good M18 Form Factor
5
Thadrian
Avatar
11/23/2023 7:43 PM
The M18 housing is a standard size in the industry, providing compatibility with a wide range of mounting options. Very good.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Low cost M18 thread magnetic proximity sensor is divided into normally open and normally closed, and the output signals are NPN and PNP. It is small size and corrosion resistance, which can be used in poor work environment.

Features

  • The detection distance of the Hall magnetic proximity sensor is determined by the target magnetic field strength.
  • It has a long service life and high reliability.
  • Its yellow LED indicator allows users to easily check the working status of the sensor.
  • The sensor is economical and easy to operate.
  • Its protection level reaches IP67 (IEC standard), which is dustproof and waterproof.

Specification

ModelATO-FN18D
Signal Output (Optional)NPN NO, NPN NC, PNP NO, PNP NC
Detection Distance15mm
Installation TypeFlush
Supply Voltage10~30 VDC
Switch Point Offset≤+10%
Hysteresis Range3~20%
Repetitive Error≤3%
Load Current≤200mA
Residual Voltage≤2.5VDC
Circuit ProtectionSurge Protection, Short Circuit Protection, Overload Protection, Reverse Polarity Protection
IndicatorYellow LED
Consumption Current≤15mA
Ambient Temperature-25~70℃
Environment Humidity35~95RH%
Switching Frequency200Hz
Withstand Voltage1000/AC 50/60Hz 60s
Insulation Resistance≥50MΩ (500VDC)
Vibration ResistantComplex Amplitude 1.5mm 10~50Hz (2 hours each in X, Y, and Z directions)
Protection DegreeIP67
DimensionM18*1*40
Housing MaterialNickel Copper Alloy
Connection Type2m PVC Cable
Weight1kg


Dimensions (Unit: mm)

Dimensions of M18 Magnetic Proximity Sensor

Wiring Diagram

NPN

Wiring Diagram of M18 NPN Magnetic Proximity Sensor

PNP

Wiring Diagram of M18 PNP Magnetic Proximity Sensor

Tips: Types of magnetic proximity sensor

  • Hall magnetic proximity sensor
    The Hall proximity sensor has the characteristics of no electric shock, low power consumption, long service life and high response frequency. The interior is integrated with epoxy resin, so it can work reliably in various harsh environments. Hall proximity switches can be used in position switches, pressure switches, odometers, etc., as a new type of electrical accessories.
    Hall proximity switches are suitable for position determination of pneumatic, hydraulic, cylinder and piston pumps, and can also be used as limit switches. When the magnetic target approaches, the Hall effect is generated, and the output switching signal is amplified. Compared with inductive sensors, it has the following advantages: it can be installed in metal, can be installed closely side by side, and can detect through metal. The disadvantage is: the distance is affected by the strength of the magnetic field and the approaching direction of the detection body, there may be two working points, and iron materials are not allowed to be used for fixing.
  • Magnetic reed proximity sensor
    The internal structure of a magnetic reed switch is similar to what is commonly referred to as a reed relay. It is a contact sensor consisting of two high-permeability alloy reeds sealed in a glass tube filled with an inert gas. A certain overlap and proper gap are maintained between the two reeds, the ends are gold-plated as contacts, and the leads are welded outside the tube. When the magnetic field strength at the position of the reed switch is large enough to make the magnetic attraction generated by the magnetization of the contact spring pieces overcome the elastic force of the spring pieces, the two spring pieces attract each other to make the contacts conduct. When the magnetic field is weakened to a certain extent, it is released by the elastic force of the spring sheet itself. Small size, small inertia, and fast action are the outstanding features of magnetic reed switches.
Product reviews
Very satisfied with shopping
5
Harrell
Avatar
2/7/2022 8:01 PM
This is a shopping trip I am very satisfied with. The appearance is very beautiful. I just received it, haven't used it yet, will review again after using it.
Was this review helpful? Yes No (0/0)
Good M18 Form Factor
5
Thadrian
Avatar
11/23/2023 7:43 PM
The M18 housing is a standard size in the industry, providing compatibility with a wide range of mounting options. Very good.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews