Hall Magnetic Proximity Sensor, M12, NPN/ PNP, Flush Type

$85.99
Factory price magnetic proximity sensor, M12 thread, is a hall effect sensor with NPN NO/NC or PNP NO/NC signal output, flush installation type, 12mm detection distance, yellow LED indicator. This hall magnetic switch provides long sensing ranges that can reliably detect magnetic objects. With an IP67 protection degree, the sensor is suitable for use in demanding industrial environments.
SKU: ATO-MPS-M12
*
Free Shipping
Delivery date: 6-12 days

M12 thread hall magnetic proximity switch is divided into normally open and normally closed, and the output signals are NPN and PNP. It is small size and corrosion resistance at low price, which can be used in poor work environment.

Features

  • The detection distance of the Hall magnetic proximity sensor is determined by the target magnetic field strength.
  • It has a long service life and high reliability.
  • Its yellow LED indicator allows users to easily check the working status of the sensor.
  • The sensor is economical and easy to operate.
  • Its protection level reaches IP67 (IEC standard), which is dustproof and waterproof.

Specification

ModelATO-FN12D
Signal Output (Optional)NPN NO, NPN NC, PNP NO, PNP NC
Detection Distance12mm
Installation TypeFlush
Supply Voltage10~30 VDC
Switch Point Offset≤+10%
Hysteresis Range3~20%
Repetitive Error≤3%
Load Current≤200mA
Residual Voltage≤2.5VDC
Circuit ProtectionSurge Protection, Short Circuit Protection, Overload Protection, Reverse Polarity Protection
IndicatorYellow LED
Consumption Current≤15mA
Ambient Temperature-25~70℃
Environment Humidity35~95RH%
Switching Frequency200Hz
Withstand Voltage1000/AC 50/60Hz 60s
Insulation Resistance≥50MΩ (500VDC)
Vibration ResistantComplex Amplitude 1.5mm 10~50Hz (2 hours each in X, Y, and Z directions)
Protection DegreeIP67
DimensionM12*1*40
Housing MaterialNickel Copper Alloy
Connection Type2m PVC Cable
Weight1kg


Dimensions (Unit: mm)

Dimensions of M12 Magnetic Proximity Sensor

Wiring Diagram

NPN

Wiring Diagram of M12 NPN Magnetic Proximity Sensor

PNP

Wiring Diagram of M12 PNP Magnetic Proximity Sensor

Tips: Structure of magnetic proximity switch

Magnetic proximity switch is a contact sensor. It consists of two alloy reeds with high magnetic conductivity and low coercivity and is sealed in a glass tube filled with inert gas. A certain amount of overlap and proper clearance are maintained between the two reeds. The ends are gold-plated as contacts and the leads are welded outside the tube. When the magnetic induction intensity of the sensor position is large enough, the two reeds attract each other to make the contact conduction. When the magnetic field weakens to a certain extent, it is released under the action of the spring itself.

Magnetic proximity switch is mainly used for detection when it is driven by a permanent magnet. If used as a limit switch, replacing the travel switch by collision contact, can improve the reliability and service life of the system. In PLC controller, it is often used as a position control signal.

In this video, ATO will show you top ten most used sensors (sensing technologies).

In this video, ATO will show you the differences between inductive and magnetic.

Product reviews
I will continue to buy it in the future.
5
Cyang
Avatar
1/25/2022 7:23 PM
This is my second purchase of this M12 proximity sensor. The first time I bought it, I felt the product was good, so I bought three for the second time, and will continue to buy them in the future.
Was this review helpful? Yes No (0/0)
Fast response
5
Wilmoth
Avatar
9/29/2024 1:21 AM
I recently purchased this Hall magnetic proximity sensor, and during use, it has a very fast response speed and high accuracy in detecting the proximity or distance of the magnet. Even in slightly noisy environments, it can work stably with almost no false alarms.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

M12 thread hall magnetic proximity switch is divided into normally open and normally closed, and the output signals are NPN and PNP. It is small size and corrosion resistance at low price, which can be used in poor work environment.

Features

  • The detection distance of the Hall magnetic proximity sensor is determined by the target magnetic field strength.
  • It has a long service life and high reliability.
  • Its yellow LED indicator allows users to easily check the working status of the sensor.
  • The sensor is economical and easy to operate.
  • Its protection level reaches IP67 (IEC standard), which is dustproof and waterproof.

Specification

ModelATO-FN12D
Signal Output (Optional)NPN NO, NPN NC, PNP NO, PNP NC
Detection Distance12mm
Installation TypeFlush
Supply Voltage10~30 VDC
Switch Point Offset≤+10%
Hysteresis Range3~20%
Repetitive Error≤3%
Load Current≤200mA
Residual Voltage≤2.5VDC
Circuit ProtectionSurge Protection, Short Circuit Protection, Overload Protection, Reverse Polarity Protection
IndicatorYellow LED
Consumption Current≤15mA
Ambient Temperature-25~70℃
Environment Humidity35~95RH%
Switching Frequency200Hz
Withstand Voltage1000/AC 50/60Hz 60s
Insulation Resistance≥50MΩ (500VDC)
Vibration ResistantComplex Amplitude 1.5mm 10~50Hz (2 hours each in X, Y, and Z directions)
Protection DegreeIP67
DimensionM12*1*40
Housing MaterialNickel Copper Alloy
Connection Type2m PVC Cable
Weight1kg


Dimensions (Unit: mm)

Dimensions of M12 Magnetic Proximity Sensor

Wiring Diagram

NPN

Wiring Diagram of M12 NPN Magnetic Proximity Sensor

PNP

Wiring Diagram of M12 PNP Magnetic Proximity Sensor

Tips: Structure of magnetic proximity switch

Magnetic proximity switch is a contact sensor. It consists of two alloy reeds with high magnetic conductivity and low coercivity and is sealed in a glass tube filled with inert gas. A certain amount of overlap and proper clearance are maintained between the two reeds. The ends are gold-plated as contacts and the leads are welded outside the tube. When the magnetic induction intensity of the sensor position is large enough, the two reeds attract each other to make the contact conduction. When the magnetic field weakens to a certain extent, it is released under the action of the spring itself.

Magnetic proximity switch is mainly used for detection when it is driven by a permanent magnet. If used as a limit switch, replacing the travel switch by collision contact, can improve the reliability and service life of the system. In PLC controller, it is often used as a position control signal.

Product reviews
I will continue to buy it in the future.
5
Cyang
Avatar
1/25/2022 7:23 PM
This is my second purchase of this M12 proximity sensor. The first time I bought it, I felt the product was good, so I bought three for the second time, and will continue to buy them in the future.
Was this review helpful? Yes No (0/0)
Fast response
5
Wilmoth
Avatar
9/29/2024 1:21 AM
I recently purchased this Hall magnetic proximity sensor, and during use, it has a very fast response speed and high accuracy in detecting the proximity or distance of the magnet. Even in slightly noisy environments, it can work stably with almost no false alarms.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews