Magnetic Powder Clutch, Hollow Shaft, 6Nm-200Nm

$415.56
High quality magnatic particle clutch rated speed with 1800rpm, rated torque 6Nm, 15Nm, 25Nm, 50Nm, 100Nm, 200Nm are optional, DC voltage 24V. Hollow shaft, quick response, used for tension control, torque limit and overload protection.
SKU: ATO-POC
*
Free Shipping
Delivery date: 6-12 days

Magnatic powder clutch can choose rated torque 6Nm, 15Nm, 50Nm, 100Nm and 200Nm, 1800rpm rated speed, it can be used to paper making machines, cookie making machines and chemistry machines, superior quality and manufacturers direct sales.

Magnetic Powder Clutch Features
1. The excitation current is linear with the torque. The transmitted torque is substantially linear with the excitation current. As long as the magnitude of the stimulation current is changed, the magnitude of the torque can be controlled over a wide range. In general, the stimulus current is substantially proportional to the transmitted torque in the range of 5%-100% of the rated torque.
2. Stable slip torque. When the stimulation current remains unchanged, the transmitted torque is not affected by the difference in rotational speed between the active and the driven, that is, there is no difference between the static friction torque and the dynamic friction torque, so that the torque can be stably achieved. This feature is applied to the tension control, and the user can accurately control the torque by adjusting the stimulation current, thereby effectively controlling the tension of the roll.
3. Prevent heat generation due to slip. Generally, the friction part is inevitably heated or even burned when continuously sliding. However, the ATO magnetic powder clutch has a complete heat sink, which will not be too hot for a long time and has a long service life.

6Nm-200Nm Magnetic Powder Clutch Specification:

ModelATO-POC-006ATO-POC-015ATO-POC-025ATO-POC-050ATO-POC-100ATO-POC-200
Rated Torque6Nm12Nm25Nm50Nm100Nm200Nm
Rated Current0.74A0.9A1.1A1.4A2A2.5A
Rated VoltageDC24V
Power17.8W21.6W26.4W33.6W48W60W
No. of Hour Set0.04S0.04S0.06S0.09S0.14S0.3S
Moment of InterialInput Side2.70*10-3 Kgcm26.3*10-3 Kgcm21.2*10-2 Kgcm22.6*10-2 Kgcm27*10-2 Kgcm22.1*10-1 Kgcm2
Onput Side5.0*10-4 Kgcm21.1*10-3 Kgcm22.3*10-3 Kgcm25.8*10-3 Kgcm27.5*10-2 Kgcm25.0*10-2 Kgcm2
Weight2.7kg5.2kg9kg14.5kg37kg53kg
Maximum Speed1800 r/min
Weight of powder14g25g39g60g117g255g

Magnetic Particle Clutch Dimension (unit: mm)
Magnetic powder clutch dimension

ModelATO-POC-006ATO-POC-015ATO-POC-025ATO-POC-050ATO-POC-100ATO-POC-200
L186103119150166198
L2213236484859
L358586682100118
L471317201821
L5122341
L6647691116130152
L7212526313245
D1140160185230280346
D28296114150176200
D3 (g7)708090110125160
D460688095110140
D560688095110140
D64248556880110
PM6*10LM6*10LM6*10LM8*12LM10*18LM10*18L
QM4*8LM6*8LM6*8LM8*12LM10*18LM10*18L
d (H7)151820303545
W (F8)45681014
T(+0.20)16.520223338.549

DC 24V Magnetic Powder Clutch Installation
Hollow shaft magnetic clutch installation
Magnetic Powder Cluch Application
Magnetic powder brake appication

Tips: How to choose Magnetic Particle Clutches and Brakes?
1. Consider whether the torque can meet the requirements of tension control system.
2. The heat generated during operation should not exceed the allowable continuous slip power of the model used.
3. Select the type according to the comprehensive mechanical support, determine how much torque is required to meet the load requirements, as well as whether the installation mode and space meet the requirements.
4. You can also contact us, we will recommend the most suitable model for you.

This video will show you water-cooled magnetic powder clutch seal ring replacement.

Product reviews
Drag torque of magnetic powder clutch
5
Ilana
Avatar
8/25/2021 2:43 AM
Assuming your 6Nm clutch is engaged when unpowered, what is the drag torque when the clutch is powered? In one state, the clutch should allow the drive shaft to rotate freely.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the clutch can allow the drive shaft to rotate freely when un-powered, because the clutch is powered by the motor. And the drag torque will be approx 4-5Nm when the clutch is powered.
Hollow shaft design is truly practical
5
Bakari
Avatar
11/23/2023 2:25 AM
The hollow shaft design of the magnetic particle clutch offers greater flexibility in operation. a range of 6Nm-200Nm covers a wide variety of application scenarios and impresses with its excellent performance. Easy to install and simple to operate, they become a competent assistant in process control.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Magnatic powder clutch can choose rated torque 6Nm, 15Nm, 50Nm, 100Nm and 200Nm, 1800rpm rated speed, it can be used to paper making machines, cookie making machines and chemistry machines, superior quality and manufacturers direct sales.

Magnetic Powder Clutch Features
1. The excitation current is linear with the torque. The transmitted torque is substantially linear with the excitation current. As long as the magnitude of the stimulation current is changed, the magnitude of the torque can be controlled over a wide range. In general, the stimulus current is substantially proportional to the transmitted torque in the range of 5%-100% of the rated torque.
2. Stable slip torque. When the stimulation current remains unchanged, the transmitted torque is not affected by the difference in rotational speed between the active and the driven, that is, there is no difference between the static friction torque and the dynamic friction torque, so that the torque can be stably achieved. This feature is applied to the tension control, and the user can accurately control the torque by adjusting the stimulation current, thereby effectively controlling the tension of the roll.
3. Prevent heat generation due to slip. Generally, the friction part is inevitably heated or even burned when continuously sliding. However, the ATO magnetic powder clutch has a complete heat sink, which will not be too hot for a long time and has a long service life.

6Nm-200Nm Magnetic Powder Clutch Specification:

ModelATO-POC-006ATO-POC-015ATO-POC-025ATO-POC-050ATO-POC-100ATO-POC-200
Rated Torque6Nm12Nm25Nm50Nm100Nm200Nm
Rated Current0.74A0.9A1.1A1.4A2A2.5A
Rated VoltageDC24V
Power17.8W21.6W26.4W33.6W48W60W
No. of Hour Set0.04S0.04S0.06S0.09S0.14S0.3S
Moment of InterialInput Side2.70*10-3 Kgcm26.3*10-3 Kgcm21.2*10-2 Kgcm22.6*10-2 Kgcm27*10-2 Kgcm22.1*10-1 Kgcm2
Onput Side5.0*10-4 Kgcm21.1*10-3 Kgcm22.3*10-3 Kgcm25.8*10-3 Kgcm27.5*10-2 Kgcm25.0*10-2 Kgcm2
Weight2.7kg5.2kg9kg14.5kg37kg53kg
Maximum Speed1800 r/min
Weight of powder14g25g39g60g117g255g

Magnetic Particle Clutch Dimension (unit: mm)
Magnetic powder clutch dimension

ModelATO-POC-006ATO-POC-015ATO-POC-025ATO-POC-050ATO-POC-100ATO-POC-200
L186103119150166198
L2213236484859
L358586682100118
L471317201821
L5122341
L6647691116130152
L7212526313245
D1140160185230280346
D28296114150176200
D3 (g7)708090110125160
D460688095110140
D560688095110140
D64248556880110
PM6*10LM6*10LM6*10LM8*12LM10*18LM10*18L
QM4*8LM6*8LM6*8LM8*12LM10*18LM10*18L
d (H7)151820303545
W (F8)45681014
T(+0.20)16.520223338.549

DC 24V Magnetic Powder Clutch Installation
Hollow shaft magnetic clutch installation
Magnetic Powder Cluch Application
Magnetic powder brake appication

Tips: How to choose Magnetic Particle Clutches and Brakes?
1. Consider whether the torque can meet the requirements of tension control system.
2. The heat generated during operation should not exceed the allowable continuous slip power of the model used.
3. Select the type according to the comprehensive mechanical support, determine how much torque is required to meet the load requirements, as well as whether the installation mode and space meet the requirements.
4. You can also contact us, we will recommend the most suitable model for you.

Product reviews
Drag torque of magnetic powder clutch
5
Ilana
Avatar
8/25/2021 2:43 AM
Assuming your 6Nm clutch is engaged when unpowered, what is the drag torque when the clutch is powered? In one state, the clutch should allow the drive shaft to rotate freely.
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the clutch can allow the drive shaft to rotate freely when un-powered, because the clutch is powered by the motor. And the drag torque will be approx 4-5Nm when the clutch is powered.
Hollow shaft design is truly practical
5
Bakari
Avatar
11/23/2023 2:25 AM
The hollow shaft design of the magnetic particle clutch offers greater flexibility in operation. a range of 6Nm-200Nm covers a wide variety of application scenarios and impresses with its excellent performance. Easy to install and simple to operate, they become a competent assistant in process control.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews