Magnetic Cylinder Sensor, Electric Type, 3-Wire-NPN

$34.80
The cylinder electric type magnetic sensor has the characteristics of miniaturization, intelligence, digitization, multi-function and systematized. It has a variety of different styles and is suitable for various cylinders. The 3-wire-NPN cylinder sensor is easy to install. The switch response time is fast. This magnetic cylinder sensor must be your best choices.
SKU: ATO-MCS-3WN
*
*
This product has a minimum quantity of 3
Free Shipping
Delivery date: 8-12 days

The cylinder sensor is mainly used to detect the position of the piston in the cylinder, and the user can directly install it in the cylinder to use. As a detection device, the magnetic sensor pneumatic cylinder is the primary link to realize automatic control and  detection, and it can meet the various requirements of users for equipment information transmission, processing, storage, recording, display and control.

Specification

ModelATO-DMS-N
Itemmagnetic cylinder sensor, electric type, 3-wire-NPM
Voltage5V-30V DC
Maximum Switching Current30V/200mA Max
Maximum Contact Capacity6W Max
Internal Current Consumption5mA Max
Internal Residual Voltage0.7V Max
Leakage Current0.01mA Max
Maximum Switching Frequency1000Hz
Impact Resistance50G
Protection CircuitReverse polarity protection Surge protection
Working Temperature-10°C~70°C
StandardCE marking, RoHS
Protection LevelIP64


Cross Section Types


Note 1: The GS type is the high-strength version corresponding to the G type, suitable for short-stroke cylinders.

Note 2: The HS type is the high-strength version corresponding to the H type, suitable for short-stroke cylinders.

Dimension (Unit: mm)

Wiring Diagram

Note: The indicator light will light up when auto switches are turned NO.

Tips: The working principles of the cylinder magnetic sensor

  1. Install the magnetic switch on the outside of the cylinder barrel. The cylinder can be various types of cylinders, but the cylinder barrel must be made of materials with weak magnetic permeability and strong magnetic isolation, such as duralumin, stainless steel, brass, etc.
  2. Install a permanent magnet (rubber magnet) magnetic ring on the non-magnetic piston. When the magnetic ring moving with the piston approaches the switch, the two reeds of the reed switch are magnetized and attracted to each other, and the contacts are closed; After the magnetic ring is removed from the switch, the reed loses its magnetism and the contact is disconnected.
  3. When the output point is closed or disconnected, an electrical signal is sent out (or the electrical signal disappears), and the corresponding solenoid valve is controlled to complete the switching action.
Product reviews
High quality after sales service
5
Boyd
Avatar
8/29/2021 9:03 PM
After I bought this 3-wire-npn magnetic cylinder sensor, I don't know how to use it. I went to consult ATO's customer service about how to use it and the precautions for using it. The customer service staff answered my questions patiently.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The cylinder sensor is mainly used to detect the position of the piston in the cylinder, and the user can directly install it in the cylinder to use. As a detection device, the magnetic sensor pneumatic cylinder is the primary link to realize automatic control and  detection, and it can meet the various requirements of users for equipment information transmission, processing, storage, recording, display and control.

Specification

ModelATO-DMS-N
Itemmagnetic cylinder sensor, electric type, 3-wire-NPM
Voltage5V-30V DC
Maximum Switching Current30V/200mA Max
Maximum Contact Capacity6W Max
Internal Current Consumption5mA Max
Internal Residual Voltage0.7V Max
Leakage Current0.01mA Max
Maximum Switching Frequency1000Hz
Impact Resistance50G
Protection CircuitReverse polarity protection Surge protection
Working Temperature-10°C~70°C
StandardCE marking, RoHS
Protection LevelIP64


Cross Section Types


Note 1: The GS type is the high-strength version corresponding to the G type, suitable for short-stroke cylinders.

Note 2: The HS type is the high-strength version corresponding to the H type, suitable for short-stroke cylinders.

Dimension (Unit: mm)

Wiring Diagram

Note: The indicator light will light up when auto switches are turned NO.

Tips: The working principles of the cylinder magnetic sensor

  1. Install the magnetic switch on the outside of the cylinder barrel. The cylinder can be various types of cylinders, but the cylinder barrel must be made of materials with weak magnetic permeability and strong magnetic isolation, such as duralumin, stainless steel, brass, etc.
  2. Install a permanent magnet (rubber magnet) magnetic ring on the non-magnetic piston. When the magnetic ring moving with the piston approaches the switch, the two reeds of the reed switch are magnetized and attracted to each other, and the contacts are closed; After the magnetic ring is removed from the switch, the reed loses its magnetism and the contact is disconnected.
  3. When the output point is closed or disconnected, an electrical signal is sent out (or the electrical signal disappears), and the corresponding solenoid valve is controlled to complete the switching action.
Product reviews
High quality after sales service
5
Boyd
Avatar
8/29/2021 9:03 PM
After I bought this 3-wire-npn magnetic cylinder sensor, I don't know how to use it. I went to consult ATO's customer service about how to use it and the precautions for using it. The customer service staff answered my questions patiently.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews