Lead Ion Selective Electrode

$615.29
Suitable for pH 4–7, this lead (Pb2+) ion selective electrode is designed for accurate measurement of lead ions in water, environmental, and laboratory samples. A separable ring ground junction and durable epoxy resin shell material with a sensitive salt membrane ensure stable performance and easy maintenance. The eletrode features a measuring range of 1.0 × 10-6 – 1.0 × 10-1 mol/L and an operating temperature of 0–80 °C.
SKU: ATO-ISE-LEAD
Free Shipping
Delivery date: 6-12 days

The lead ion selective electrode integrates an epoxy resin housing with a specialized salt membrane, designed for stable operation from 0–80°C and a pH range of 4–7, and equipped with a standard BNC (Q9) connector for plug-and-play compatibility, providing accurate measurements for water analysis.

Specification

ModelATO-972106
TypeLead Ion Composite Electrode
IonLead Ion (Pb2+)
Standard SolutionPb(NO3)2 Solution
Measurement Range1.0 × 10-6 – 1.0 × 10-1 mol/L
Repeatability±2%
Mass Concentration0.2–20700ppm
pH Range4–7
Liquid JunctionSeparable Ring Ground Joint
Reference StructureBuilt-in Reference System
Reference SolutionISE Reference Filling Solution Type B
High-end Ionic Strength RegulatorIonic Strength Regulator Type VI
Sensitive MembraneSalt Membrane
Shell MaterialEpoxy Resin
Operating Temperature0℃–80℃
ConnectorBNC (Q9)
Dimensionφ12*120mm

Feature

lead ise three feature

  1. Epoxy Resin Housing&Salt Membrane: The lead ion selective electrode combines a robust epoxy resin housing with a highly selective salt membrane. This design ensures resistance to corrosive chemicals and delivers stable, precise lead ion measurements over extended use.
  2. Separable Ring Ground Joint: The detachable ring ground joint provides stable potential, reduces the risk of blockage, and enables easy cleaning for consistent performance in complex samples.
  3. BNC (Q9) Connector: The Lead ISE uses a BNC (Q9) connector for easy, secure connection and consistent, accurate lead ion readings.

Detail

Lead ion selective electrode detail

Application

Ion selective electrode ISE application

Tips: How to store and maintain lead ion selective electrode?

Store the lead ISE upright in a proper storage solution or clean distilled water when not in use to keep the membrane hydrated. Always rinse with distilled water after each measurement to remove residues and prevent contamination. Avoid letting the membrane dry out, and check it regularly for signs of wear. Replace the membrane if response slows, readings drift, or the electrode shows instability.

In this video, ATO will show you top ten most used sensors (sensing technologies).

Product reviews
Stable readings and easy to use
5
Milay
Avatar
3/12/2026 6:48 PM
I’ve been using this ion selective electrode for testing water samples in our lab, and it has performed very reliably. The measurement is stable, even during long testing sessions. I especially appreciate its wide measuring range, which allows us to detect both low and relatively higher concentrations of lead ions.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The lead ion selective electrode integrates an epoxy resin housing with a specialized salt membrane, designed for stable operation from 0–80°C and a pH range of 4–7, and equipped with a standard BNC (Q9) connector for plug-and-play compatibility, providing accurate measurements for water analysis.

Specification

ModelATO-972106
TypeLead Ion Composite Electrode
IonLead Ion (Pb2+)
Standard SolutionPb(NO3)2 Solution
Measurement Range1.0 × 10-6 – 1.0 × 10-1 mol/L
Repeatability±2%
Mass Concentration0.2–20700ppm
pH Range4–7
Liquid JunctionSeparable Ring Ground Joint
Reference StructureBuilt-in Reference System
Reference SolutionISE Reference Filling Solution Type B
High-end Ionic Strength RegulatorIonic Strength Regulator Type VI
Sensitive MembraneSalt Membrane
Shell MaterialEpoxy Resin
Operating Temperature0℃–80℃
ConnectorBNC (Q9)
Dimensionφ12*120mm

Feature

lead ise three feature

  1. Epoxy Resin Housing&Salt Membrane: The lead ion selective electrode combines a robust epoxy resin housing with a highly selective salt membrane. This design ensures resistance to corrosive chemicals and delivers stable, precise lead ion measurements over extended use.
  2. Separable Ring Ground Joint: The detachable ring ground joint provides stable potential, reduces the risk of blockage, and enables easy cleaning for consistent performance in complex samples.
  3. BNC (Q9) Connector: The Lead ISE uses a BNC (Q9) connector for easy, secure connection and consistent, accurate lead ion readings.

Detail

Lead ion selective electrode detail

Application

Ion selective electrode ISE application

Tips: How to store and maintain lead ion selective electrode?

Store the lead ISE upright in a proper storage solution or clean distilled water when not in use to keep the membrane hydrated. Always rinse with distilled water after each measurement to remove residues and prevent contamination. Avoid letting the membrane dry out, and check it regularly for signs of wear. Replace the membrane if response slows, readings drift, or the electrode shows instability.

Product reviews
Stable readings and easy to use
5
Milay
Avatar
3/12/2026 6:48 PM
I’ve been using this ion selective electrode for testing water samples in our lab, and it has performed very reliably. The measurement is stable, even during long testing sessions. I especially appreciate its wide measuring range, which allows us to detect both low and relatively higher concentrations of lead ions.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews