Laser Sensor, Position/Length Measurement, M8, 150mm/50m

$134.92
M8 laser sensor with laser spot size 1mm can be used for industrial automation control, such as measuring the object position, length and height, or detecting the motor speed. M8 laser sensor has diffuse reflection/through beam detection mode and NPN/PNP NO/NC output mode for selection, thread size M8*1mm, protection class IP67. The diffuse reflection type and through beam type laser sensor have respective detection range of 150mm/50m.
SKU: ATO-LASES-M8
*
*
*
Free Shipping
Delivery date: 6-12 days

Laser sensor with M8*1mm metal detection head, 1mm spot size, diffuse reflection/through beam detection mode and NPN/PNP NO/NC output mode for selection.

Specification:

ModelATO-LASES-M8
Shipping weight2kg
Thread sizeM8*1mm
Detection of spot size1mm
Detection mode *Diffuse reflection type, through beam type
Detection rangeDiffuse reflection type: Sn=150mm, Sn=200mm; through beam type: Sn=50m
Light sourceInfrared ray LED (880nm)
The laser beam is invisible. The laser spot is visible.
Output mode *NPN NO, NPN NC, PNP NO, PNP NC
Power supply10-30VDC
No-load current<10mA
Maximum load current150mA
Leakage current<0.01mA
Voltage drop<1V
Switching frequency120Hz
Response time0.1ms
Switching hysteresis<15% (sr)
Repeat accuracy<1.0% (sr)
Protection classIP67
Environment humidity35-95%
Operating temperature-5~+50℃ (23~122℉)
Temperature drift<10% (sr)
Short circuit protectionYes
Indicator lightYes
Housing material304 stainless steel (detector), plastic (connector protective sleeve)
Connection methodDirect lead wire
Cable length2m

Note: The detection range of diffuse reflection laser sensor can be adjusted by the knob (Clockwise rotation for adding distance, anticlockwise rotation for reducing distance). The detection range of through beam laser sensor can be adjusted by the distance of projector and receiver.
Dimension (diffuse reflection type, unit: mm):
M8 laser sensor for position measurement dimensional drawing
Wiring diagram:
Diffuse reflection/through beam laser sensor M8 wiring diagram

Tips: Laser sensors vs. ultrasonic sensors
Ultrasonic sensors are also often used to detect objects at greater distances, and since it is not an optical device, it is not affected by color changes. However, ultrasonic sensors measure distance based on the speed of sound, so they have some inherent disadvantages and cannot be used in the following situations.

  1. When the target to be measured is not perpendicular to the transducer of the sensor. The target of ultrasonic detection must be within an angle of no more than 10° from the vertical azimuth of the sensor.
  2. When the beam diameter is small. The general ultrasonic beam is 0.76cm in diameter when it is 2m away from the sensor.
  3. When a visible spot is required for position calibration.
  4. Windy occasions.
  5. Vacuum occasions.
  6. When the temperature gradient is large. In this case the speed of sound will change.
  7. Occasions that require quick response.

While the laser sensor can solve the detection of all the above occasions, which cannot be done by ultrasonic sensors.

In this video, ATO will show you top ten most used sensors (sensing technologies).

How to Connect Photoelectric Sensors to PLC?

This video introduces the connection method of photoelectric sensors to PLC. Whether it is a photoelectric sensor, proximity sensor or laser switch, their wiring principles are similar. We can use its output signal to control the intermediate relay, or we can input the signal to the PLC for logic control.

How Do Laser Sensor/Switch Work with Relay?

This video shows an example of how laser sensors/switches work with relays. Photoelectric switches, proximity switches or laser sensors are often used as PLC input signals and relay coil controls.

Product reviews
300mm/50m laser sensor suitable for my use
5
Lindab
Avatar
9/18/2021 12:50 AM
This 300mm/50m laser sensor is much better than I expected. It has a variety of measurement modes and easy-to-use controls, making it ideal for professionals like me.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Laser sensor with M8*1mm metal detection head, 1mm spot size, diffuse reflection/through beam detection mode and NPN/PNP NO/NC output mode for selection.

Specification:

ModelATO-LASES-M8
Shipping weight2kg
Thread sizeM8*1mm
Detection of spot size1mm
Detection mode *Diffuse reflection type, through beam type
Detection rangeDiffuse reflection type: Sn=150mm, Sn=200mm; through beam type: Sn=50m
Light sourceInfrared ray LED (880nm)
The laser beam is invisible. The laser spot is visible.
Output mode *NPN NO, NPN NC, PNP NO, PNP NC
Power supply10-30VDC
No-load current<10mA
Maximum load current150mA
Leakage current<0.01mA
Voltage drop<1V
Switching frequency120Hz
Response time0.1ms
Switching hysteresis<15% (sr)
Repeat accuracy<1.0% (sr)
Protection classIP67
Environment humidity35-95%
Operating temperature-5~+50℃ (23~122℉)
Temperature drift<10% (sr)
Short circuit protectionYes
Indicator lightYes
Housing material304 stainless steel (detector), plastic (connector protective sleeve)
Connection methodDirect lead wire
Cable length2m

Note: The detection range of diffuse reflection laser sensor can be adjusted by the knob (Clockwise rotation for adding distance, anticlockwise rotation for reducing distance). The detection range of through beam laser sensor can be adjusted by the distance of projector and receiver.
Dimension (diffuse reflection type, unit: mm):
M8 laser sensor for position measurement dimensional drawing
Wiring diagram:
Diffuse reflection/through beam laser sensor M8 wiring diagram

Tips: Laser sensors vs. ultrasonic sensors
Ultrasonic sensors are also often used to detect objects at greater distances, and since it is not an optical device, it is not affected by color changes. However, ultrasonic sensors measure distance based on the speed of sound, so they have some inherent disadvantages and cannot be used in the following situations.

  1. When the target to be measured is not perpendicular to the transducer of the sensor. The target of ultrasonic detection must be within an angle of no more than 10° from the vertical azimuth of the sensor.
  2. When the beam diameter is small. The general ultrasonic beam is 0.76cm in diameter when it is 2m away from the sensor.
  3. When a visible spot is required for position calibration.
  4. Windy occasions.
  5. Vacuum occasions.
  6. When the temperature gradient is large. In this case the speed of sound will change.
  7. Occasions that require quick response.

While the laser sensor can solve the detection of all the above occasions, which cannot be done by ultrasonic sensors.

Product reviews
300mm/50m laser sensor suitable for my use
5
Lindab
Avatar
9/18/2021 12:50 AM
This 300mm/50m laser sensor is much better than I expected. It has a variety of measurement modes and easy-to-use controls, making it ideal for professionals like me.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews