IP66 Aluminum Waterproof Junction Box

$52.46
The series of waterproof junction box is made of aluminum alloy die-casting, waterproof rating is IP66. Adopting silicone sealing strip, good sealing performance, waterproof, dustproof, corrosion-resistant, anti-radio frequency interference, easy to process. Aluminum waterproof junction box is very suitable as electrical junction box for indoor and outdoor electrical engineering.
SKU: ATO-WJB-67
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options

Specification

ModelATO-WJB-FA
Waterproof RatingIP66
MaterialAluminum Alloy
SizeRefer to the size chart
CertificationCE
Operating Temperature-40℃~120℃

IP66 Aluminum Waterproof Junction Box Diagram

IP67 Aluminum Waterproof Junction Box Diagram

Installation of IP66 Aluminum Waterproof Junction Box

There are mounting holes on the back of aluminum waterproof junction box. According to requirements, users can install the waterproof box at specified position according to the mounting hole corresponding to the hanging corner. As shown in the figure.

Installation of IP67 Aluminum Waterproof Junction Box

Tips: How to select protection level and size for aluminum waterproof junction box?

  • Correctly select seal level of the cast aluminum waterproof box.

When selecting a waterproof junction box, the IP protection level is a very important factor. According to IEC-60529, the first number in IP (Ingress protection) rating is the ability of the shell to resist intrusion of solid particles. The second number indicates the protective against ability of shell to water droplets. IP rating of the ATO cast aluminum waterproof junction box all reaches IP66, which means that it can adapt to more severe use environments.

The IP rating is only defined for the housing, but equipment should also meet the corresponding requirements after installation. In other words, if the waterproof junction box needs to be installed with cable waterproof joint, its protection level should be higher than that of cabinet.

  • Correctly select size of the cast aluminum waterproof box.

First, selection of the correct size for waterproof box is based on the size of existing components and installation location of the device. However, users should also consider whether new components will be added in the future. Consider that if new components are added, whether there is enough space. In addition, it should be noted that the reference size provided by waterproof box manufacturer is the external or internal dimensions. Mountable space is usually smaller than the internal dimensions provided.

Size Chart (Unit:mm)

ModelSize (L*W*H)Remark
ATO-WJB-FA10-2228*150*904 screws
ATO-WJB-FA62160*160*904 screws
ATO-WJB-FA35140*140*1004 screws
ATO-WJB-FA10228*150*754 screws
ATO-WJB-FA36250*120*824 screws
ATO-WJB-FA63240*160*754 screws
ATO-WJB-FA64240*160*1004 screws
ATO-WJB-FA14220*155*95flip cover, 4 screws
ATO-WJB-FA65265*185*754 screws
ATO-WJB-FA66260*185*964 screws
ATO-WJB-FA38320*120*904 screws
ATO-WJB-FA15250*185*88flip cover, 4 screws
ATO-WJB-FA67260*185*1284 screws
ATO-WJB-FA40360*160*954 screws
ATO-WJB-FA68300*210*1004 screws
ATO-WJB-FA70340*235*954 screws
ATO-WJB-FA71340*235*1204 screws
ATO-WJB-FA72340*235*1354 screws
ATO-WJB-FA73340*235*1604 screws

Product reviews
So far so good
5
wjl
Avatar
4/21/2022 3:17 AM
I bought this to house a circuit board that contains a wifi antenna for remote control of my pool pump. The requirements were that it be weatherproof, bug proof, and looks fairly good. If you are using it as a true junction box you won't be disappointed.
Was this review helpful? Yes No (0/0)
Amazing waterproof effect
5
Fletcher
Avatar
5/6/2022 3:04 AM
I bought this waterproof junction box to mount my board and hopefully control my motors. The box is made to be waterproof, and the rubber gaskets are of such good quality that you can cut them to insert wiring while maintaining a fairly tight seal.
Was this review helpful? Yes No (0/0)
Great junction box
5
Monzer
Avatar
7/19/2022 7:33 PM
Great junction box for securing and housing cable splitters and keeping them safe from moisture and the elements, and keeping a neat look to the connections.
Was this review helpful? Yes No (0/0)
Works very well
5
Jakko
Avatar
11/21/2022 8:03 PM
Worked for my application. So far no leaks. Aluminum waterproof Junction box is mounted outside and in direct contact with sun and rain. Time will tell how it holds up to daily sun exposure.
Was this review helpful? Yes No (0/0)
Easy to install
5
Saxon
Avatar
3/7/2023 11:32 PM
The quality of the materials used in its construction is excellent and it feels very durable and sturdy. The waterproof feature works perfectly and I am confident that it will keep my electrical connections safe from water damage. And the installation was also very easy.
Was this review helpful? Yes No (0/0)
Custom junction box
4
Chidel
Avatar
8/5/2026 1:32 AM
Hello. We have a winch unit used for offshore oil and gas cable operations and would like to customize the junction box.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, we cannot currently provide custom junction boxes; we can only provide standard material junction boxes.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Specification

ModelATO-WJB-FA
Waterproof RatingIP66
MaterialAluminum Alloy
SizeRefer to the size chart
CertificationCE
Operating Temperature-40℃~120℃

IP66 Aluminum Waterproof Junction Box Diagram

IP67 Aluminum Waterproof Junction Box Diagram

Installation of IP66 Aluminum Waterproof Junction Box

There are mounting holes on the back of aluminum waterproof junction box. According to requirements, users can install the waterproof box at specified position according to the mounting hole corresponding to the hanging corner. As shown in the figure.

Installation of IP67 Aluminum Waterproof Junction Box

Tips: How to select protection level and size for aluminum waterproof junction box?

  • Correctly select seal level of the cast aluminum waterproof box.

When selecting a waterproof junction box, the IP protection level is a very important factor. According to IEC-60529, the first number in IP (Ingress protection) rating is the ability of the shell to resist intrusion of solid particles. The second number indicates the protective against ability of shell to water droplets. IP rating of the ATO cast aluminum waterproof junction box all reaches IP66, which means that it can adapt to more severe use environments.

The IP rating is only defined for the housing, but equipment should also meet the corresponding requirements after installation. In other words, if the waterproof junction box needs to be installed with cable waterproof joint, its protection level should be higher than that of cabinet.

  • Correctly select size of the cast aluminum waterproof box.

First, selection of the correct size for waterproof box is based on the size of existing components and installation location of the device. However, users should also consider whether new components will be added in the future. Consider that if new components are added, whether there is enough space. In addition, it should be noted that the reference size provided by waterproof box manufacturer is the external or internal dimensions. Mountable space is usually smaller than the internal dimensions provided.

Product reviews
So far so good
5
wjl
Avatar
4/21/2022 3:17 AM
I bought this to house a circuit board that contains a wifi antenna for remote control of my pool pump. The requirements were that it be weatherproof, bug proof, and looks fairly good. If you are using it as a true junction box you won't be disappointed.
Was this review helpful? Yes No (0/0)
Amazing waterproof effect
5
Fletcher
Avatar
5/6/2022 3:04 AM
I bought this waterproof junction box to mount my board and hopefully control my motors. The box is made to be waterproof, and the rubber gaskets are of such good quality that you can cut them to insert wiring while maintaining a fairly tight seal.
Was this review helpful? Yes No (0/0)
Great junction box
5
Monzer
Avatar
7/19/2022 7:33 PM
Great junction box for securing and housing cable splitters and keeping them safe from moisture and the elements, and keeping a neat look to the connections.
Was this review helpful? Yes No (0/0)
Works very well
5
Jakko
Avatar
11/21/2022 8:03 PM
Worked for my application. So far no leaks. Aluminum waterproof Junction box is mounted outside and in direct contact with sun and rain. Time will tell how it holds up to daily sun exposure.
Was this review helpful? Yes No (0/0)
Easy to install
5
Saxon
Avatar
3/7/2023 11:32 PM
The quality of the materials used in its construction is excellent and it feels very durable and sturdy. The waterproof feature works perfectly and I am confident that it will keep my electrical connections safe from water damage. And the installation was also very easy.
Was this review helpful? Yes No (0/0)
Custom junction box
4
Chidel
Avatar
8/5/2026 1:32 AM
Hello. We have a winch unit used for offshore oil and gas cable operations and would like to customize the junction box.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, we cannot currently provide custom junction boxes; we can only provide standard material junction boxes.
Only registered users can write reviews
Customers who bought this item also bought

30A High Voltage DC Contactor, 12V/24V coil

ATO-DCCON-HV30
$87.23
Cheap Price DC contactor relay, normally open (SPST-NO) type, 30 amps rated load current of contact circuit, available with 12V or 24V coils. Magnetic contactor is widely used in the DC 12-900V high voltage field, offers exceptional performance in an extremely small and lightweight device.