Industrial Solid State Relay 150A/200A/250A/300A DC-AC SSR

$102.86
Reliable industrial single phase solid state relay has optional load current 150A/ 200A/ 250A/ 300A to suit different automatic control requirements. DC to AC SSR can drive high current 24-440V AC with low control voltage 3-32V DC, safe and fast switching, high-strength structure, compact size and favorable price.
SKU: ATO-GYSSR-200DA
*
Free Shipping
Delivery date: 6-12 days

Industrial solid state relay can be selected in the load current range of 150 Amp, 200 Amp, 250 Amp and 300 Amp. This single phase SSR is DC control AC type, applicable for petrochemical equipment, pharmaceutical machines, food machines, packaging machines, plastic machines, CNC machine tool and other automatic control systems.

Specification

ModelATO-GYSSR-150DA(H3)ATO-GYSSR-200DA(H3)ATO-GYSSR-250DA(H3)ATO-GYSSR-300DA(H3)
Control Voltage3-32VDC
Control CurrentDC 7-32mA
Load Current150A200A250A300A
Load Voltage24-440V AC
On-State Voltage Drop≤1.5V
Off-State Leakage Current≤4mA
Off-State Time≤10mS
Dielectric Strength2500V AC
Insulation Resistance1000MΩ/ 500V DC
Ambient Temperature-20 ~ +70℃
Mounting MethodBolt Fixing
Working IndicatorLED
Weight230g
Dimension (L*W*H)94*34*42mm
Heat Sink (Optional)More info., please click here.

Dimension (Unit: mm)

150A - 300A Industrial Solid State Relay Dimension

Wiring Diagram

industrial Solid State Relay SSR-200DA Wiring Diagram

Operation Note

1. For the resistive load, it can not exceed 60% of the rated current of the SSR.
2. For the inductive or capacitive load, it can not exceed 40% of the rated current of the SSR.
3. For the electric motor, it can not exceed 20% of the rated current of the SSR.
4. Proper radiator or heat sink should be equipped for the industrial solid state relay. If the load cooling condition is not good, it is necessary to leave some margin. Avoid the load short circuit because over current and short circuit are the main causes for permanent damage of the internal SCR of the SSR.
5. Over current protection: Using fast fuse and air switch is one of the methods for over current protection; fuse is also available for small capacity.
6. Over voltage protection: It can adopt the parallel voltage-dependent resistor (MOV). The MOV area decides the absorption power, and its thickness decides the protective voltage value. Generally, 471/10D voltage-dependent resistor is suitable for 220V series SSR, 681/10D voltage-dependent resistor for 380V series SSR, and 821/10D voltage-dependent resistor for 480V series SSR.

Tips: Usage of Solid State Relay – Inductive Load

Although AC solid state relay is cut off at zero current, there will be still some problems due to other causes. On the moment of zero current, the SSR will changeover (reverse current direction) at which the SSR does not conduct the current. All the transient line voltage is bridged over on the connection terminal, which produce a high dv/dt to make the SSR breakover at once, so as to have the SSR “lock up” state without release. Most of AC SSR has RC to enhance the capability against dv/dt. For DC inductive load, there will be high back EMF when it starts up. It can add the freewheeling diode in the two ends of load to make the DC solid state relay work reliable.

How to Choose the DC-AC Industrial Solid State Relay Model?

In this video, we show you the available models of ATO solid state relays for controlling industrial heavy loads. At the same time, we introduce their main design features and key specifications.

Product reviews
Configuration of 200A industrial solid state relay
5
Mullikin
Avatar
8/4/2021 12:30 AM
Could you configure your 200A solid state relay to be with fan, and heat sink?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, of course. The SSR heat sink & fan can be selected at the drop-down list, and for more info. of heat sink, please check the list: https://www.ato.com/ssr-heat-sink
Can I use your 300 amp SSR as a starter relay on a 12 VDC automotive application?
5
Nischal
Avatar
12/13/2021 1:41 AM
Can I use your 300 amp SSR as a starter relay on a 12 VDC automotive application?
Was this review helpful? Yes No (0/0)
ATO Responded
What is your 12 VDC automotive application, and how will you use SSR for? Please, describe more.
>>>If SSR is used as a starting relay, then its rated current should be 5-6 times your load rated current.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Industrial solid state relay can be selected in the load current range of 150 Amp, 200 Amp, 250 Amp and 300 Amp. This single phase SSR is DC control AC type, applicable for petrochemical equipment, pharmaceutical machines, food machines, packaging machines, plastic machines, CNC machine tool and other automatic control systems.

Specification

ModelATO-GYSSR-150DA(H3)ATO-GYSSR-200DA(H3)ATO-GYSSR-250DA(H3)ATO-GYSSR-300DA(H3)
Control Voltage3-32VDC
Control CurrentDC 7-32mA
Load Current150A200A250A300A
Load Voltage24-440V AC
On-State Voltage Drop≤1.5V
Off-State Leakage Current≤4mA
Off-State Time≤10mS
Dielectric Strength2500V AC
Insulation Resistance1000MΩ/ 500V DC
Ambient Temperature-20 ~ +70℃
Mounting MethodBolt Fixing
Working IndicatorLED
Weight230g
Dimension (L*W*H)94*34*42mm
Heat Sink (Optional)More info., please click here.

Dimension (Unit: mm)

150A - 300A Industrial Solid State Relay Dimension

Wiring Diagram

industrial Solid State Relay SSR-200DA Wiring Diagram

Operation Note

1. For the resistive load, it can not exceed 60% of the rated current of the SSR.
2. For the inductive or capacitive load, it can not exceed 40% of the rated current of the SSR.
3. For the electric motor, it can not exceed 20% of the rated current of the SSR.
4. Proper radiator or heat sink should be equipped for the industrial solid state relay. If the load cooling condition is not good, it is necessary to leave some margin. Avoid the load short circuit because over current and short circuit are the main causes for permanent damage of the internal SCR of the SSR.
5. Over current protection: Using fast fuse and air switch is one of the methods for over current protection; fuse is also available for small capacity.
6. Over voltage protection: It can adopt the parallel voltage-dependent resistor (MOV). The MOV area decides the absorption power, and its thickness decides the protective voltage value. Generally, 471/10D voltage-dependent resistor is suitable for 220V series SSR, 681/10D voltage-dependent resistor for 380V series SSR, and 821/10D voltage-dependent resistor for 480V series SSR.

Tips: Usage of Solid State Relay – Inductive Load

Although AC solid state relay is cut off at zero current, there will be still some problems due to other causes. On the moment of zero current, the SSR will changeover (reverse current direction) at which the SSR does not conduct the current. All the transient line voltage is bridged over on the connection terminal, which produce a high dv/dt to make the SSR breakover at once, so as to have the SSR “lock up” state without release. Most of AC SSR has RC to enhance the capability against dv/dt. For DC inductive load, there will be high back EMF when it starts up. It can add the freewheeling diode in the two ends of load to make the DC solid state relay work reliable.

Product reviews
Configuration of 200A industrial solid state relay
5
Mullikin
Avatar
8/4/2021 12:30 AM
Could you configure your 200A solid state relay to be with fan, and heat sink?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, of course. The SSR heat sink & fan can be selected at the drop-down list, and for more info. of heat sink, please check the list: https://www.ato.com/ssr-heat-sink
Can I use your 300 amp SSR as a starter relay on a 12 VDC automotive application?
5
Nischal
Avatar
12/13/2021 1:41 AM
Can I use your 300 amp SSR as a starter relay on a 12 VDC automotive application?
Was this review helpful? Yes No (0/0)
ATO Responded
What is your 12 VDC automotive application, and how will you use SSR for? Please, describe more.
>>>If SSR is used as a starting relay, then its rated current should be 5-6 times your load rated current.
Only registered users can write reviews