Note: This solenoid valve cannot be used for drinking water.
High pressure solenoid valve with pilot, operated piston construction for compress air machine, injecting plastic machine. Solenoid valve often used in medical equipment and drying equipment.
Specification:
(Normally open can be customized)
| Model | ATO-HKKB-08 | ATO-HKKB-08 | ATO-HKKB-10 | ATO-HKKB-15 |
| Port Size | 1/4" | 1/4" | 3/8" | 1/2" |
| Orifice | 1.2 | 2 | 2.5 | 3 |
| Cv | 0.03 | 0.09 | 0.15 | 0.24 |
| Min Pressure | 0.1 MPa | 0.1 MPa | 0.1 MPa | 0.1 MPa |
| Max Pressure (AC 24VA) | 25 MPa | 25 MPa | 25 MPa | 25 MPa |
| Max Pressure (DC 18W) | 25 MPa | 25 MPa | 25 MPa | 10 MPa |
| Seals Material | PTFE | |||
| Body Material | SS304 | |||
| Coil | S21B | |||
| Voltage | AC 24V/110V/220V | |||
| Port Thread | BSPP, BSPT, NPT | |||
| Medium | water, hot water, compressed air, oil | |||
| Temperature | -10 ℃ ~ 180 ℃ | |||
| Tolerance | ±10% | |||
Dimension (Unit: mm)

| Size | A (mm) | C (mm) |
| HKKB-1/4" | 53 | 148 |
| HKKB-3/8" | 53 | 148 |
| HKKB-1/2" | 53 | 148 |
Tips: Precautions For Installation of High Pressure Solenoid Valve
- Read the manual before installation.
- The pipeline should be washed before use, the medium is not clean should be installed filter, to prevent impurities from interfering with the normal work of the valve.
- A long time after the suspension of the solenoid valve, should be easy to use after the removal of condensation; When disassembling and washing, the parts should be put in order and then restored to their original state.
- Solenoid valve is generally one-way work, can not be reversed, the arrow on the valve is the direction of movement of the pipeline fluid, must be consistent.
- Solenoid valve in the frozen place to work again should be heated treatment, or set insulation measures.
- Solenoid valve installation general valve body level, coil vertical upward, some products can be arbitrarily installed, but when the conditions permit the best vertical, in order to increase the service life.
Product reviews
Just the solenoid valve I need
Dezumar
10/25/2022 11:50 PM
I'm an electrical worker. This 24V normally closed solenoid valve was just what I needed and was very easy to install, build quality seems good. Solenoid valve has a great effect on my electrical equipment. Great value for the money!!
Was this review helpful? (0/0)
3D model of a solenoid valve
Neshov
8/3/2025 8:51 PM
I would like to purchase a solenoid valve (model: ATO-HKKB-0). Could you provide a 3D model of this product?
Was this review helpful? (0/0)
Only registered users can write reviews