High Power Three Phase Bridge Rectifier Module, 300/400 Amp

$84.65
Buy high power three-phase bridge rectifier modules online, providing 300/400 amps of high current handling capacity, with 2500V insulation voltage to prevent electrical interference. 3-phase bridge rectifier module efficiently converts AC to DC, suitable for industrial power control, motor drive and inverter applications.
SKU: ATO-RF-MDS03
*
Free Shipping
Delivery date: 6-12 days

High-power bridge rectifier module plays a key role in multiple applications: providing stable DC power to instruments and equipment, converting input power to PWM frequency converters, providing high current DC power to inverter welding machines, and so on.

Features

  • Provide electrical insulation of 2500V voltage between the chip and the substrate to ensure reliable isolation.
  • 3-phase bridge rectifier module has excellent temperature characteristics and power cycling capability, and can operate stably under extreme working conditions.
  • Its design achieves low forward voltage drop, thereby improving energy efficiency and reducing power loss.
  • The bridge rectifier module supports high surge currents to meet the demand for instantaneous high loads.
  • The maximum working junction temperature of the equipment can reach 150 ℃, meeting the requirements of high-temperature environments.
  • Its compact design makes it small in size and lightweight, making it easy to install and move.

Specification

ModelATO-LJ-MDS300AATO-LJ-MDS400A
DC output current300A400A
Reverse repetitive peak voltage1600V
Reverse repetitive peak current5mA
Forward non repetitive surge current3.6KA
Square time product of surge current50A2s*103
Threshold voltage0.8V
Slope resistance3.5mΩ
Positive peak voltage1.30V
Thermal impedance (junction to shell)0.14℃/W
Thermal impedance (shell to radiator)0.07℃/W
Insulation voltage2500V
Installation torque (M6)6N·m
Installation torque (M8)10N·m
Storage temperature-40~125℃
Weight620g

Note: This product must be installed on a heat sink. Please contact us to choose a suitable heat sink according to the actual situation.

Dimension (mm)

High power three phase bridge rectifier module dimension

Circuit Diagram

High power three phase bridge rectifier module circuit diagram

Tips: How to choose a bridge rectifier module?

  1. Choose a module with a maximum current rating that meets or exceeds the peak current requirements of your application.
  2. Ensure the module’s maximum voltage rating is higher than the operating voltage of your system to prevent potential damage.
  3. Select a module with sufficient heat dissipation features or a compatible heat sink to avoid overheating during operation.
  4. Pick a package type, such as surface-mount (SMD) or through-hole, that fits your installation and spatial constraints.
  5. Consider the module's ability to operate in your specific environmental conditions, including temperature and humidity.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

High-power bridge rectifier module plays a key role in multiple applications: providing stable DC power to instruments and equipment, converting input power to PWM frequency converters, providing high current DC power to inverter welding machines, and so on.

Features

  • Provide electrical insulation of 2500V voltage between the chip and the substrate to ensure reliable isolation.
  • 3-phase bridge rectifier module has excellent temperature characteristics and power cycling capability, and can operate stably under extreme working conditions.
  • Its design achieves low forward voltage drop, thereby improving energy efficiency and reducing power loss.
  • The bridge rectifier module supports high surge currents to meet the demand for instantaneous high loads.
  • The maximum working junction temperature of the equipment can reach 150 ℃, meeting the requirements of high-temperature environments.
  • Its compact design makes it small in size and lightweight, making it easy to install and move.

Specification

ModelATO-LJ-MDS300AATO-LJ-MDS400A
DC output current300A400A
Reverse repetitive peak voltage1600V
Reverse repetitive peak current5mA
Forward non repetitive surge current3.6KA
Square time product of surge current50A2s*103
Threshold voltage0.8V
Slope resistance3.5mΩ
Positive peak voltage1.30V
Thermal impedance (junction to shell)0.14℃/W
Thermal impedance (shell to radiator)0.07℃/W
Insulation voltage2500V
Installation torque (M6)6N·m
Installation torque (M8)10N·m
Storage temperature-40~125℃
Weight620g

Note: This product must be installed on a heat sink. Please contact us to choose a suitable heat sink according to the actual situation.

Dimension (mm)

High power three phase bridge rectifier module dimension

Circuit Diagram

High power three phase bridge rectifier module circuit diagram

Tips: How to choose a bridge rectifier module?

  1. Choose a module with a maximum current rating that meets or exceeds the peak current requirements of your application.
  2. Ensure the module’s maximum voltage rating is higher than the operating voltage of your system to prevent potential damage.
  3. Select a module with sufficient heat dissipation features or a compatible heat sink to avoid overheating during operation.
  4. Pick a package type, such as surface-mount (SMD) or through-hole, that fits your installation and spatial constraints.
  5. Consider the module's ability to operate in your specific environmental conditions, including temperature and humidity.
Only registered users can write reviews