Handheld LCR Meter, 100Hz~100kHz

$504.62
Cheap handheld LCR meter. Test frequency can select 100Hz~10kHz or 100Hz~100kHz, basic accuracy 0.20%. Measure inductance (L) max. 9999H, capacitance (C) max. 9999μF, resistance (R) max. 99.99MΩ. It is controlled by a high-performance 32 bit ARM microprocessor, the main and secondary specifications are displayed at the same time. Affordable and easy to use.
SKU: ATO-LCRM-1010
*
Free Shipping
Delivery date: 6-12 days

Features

  • 2.8-inch true color LCD display with high brightness.
  • USB communication function, built-in Mini-USB interface (virtual serial port). Comparison function of a set of recorded main specifications.
  • Switchable attachment (AUX) sequencing correction function: open and short circuit scan frequency removal in full range.
  • 7.4V, 1300mAh charging interface serial port for rechargeable lithium batteries.

Specification

ModelATO-LCRM-825ATO-LCRM-826
Test SpecificationsL, C, R, Z
Monitoring SpecificationsD, Q, θ (deg), θ (rad) ESR
Accuracy0.20%
Frequency
100Hz, 120Hz, 1kHz, 10kHz, 100kHz100Hz, 120Hz, 1kHz, 10kHz
Display Range
L: 0.01μH~9999H
Q: 0.0001~9999
C: 0.01pF~9999μF
θ (deg): -179.99°~179.99°
R, Z: 0.0001Ω~99.99MΩ
θ (rad): -3.1416~3.1416
D: 0.001~9.999
L: 0.01μH~9999H
Q: 0.0001~9999
C: 0.01pF~9999μF
θ (deg): -179.99°~179.99°
R, Z: 0.0001Ω~99.99MΩ
θ (rad): -3.1416~3.1416
D: 0.001~9.999
Source Resistance
100Ω
RangeAutomatic or Manual
Maximum Reading5 bits of main specification and 5 bit display of sub specification
Signal Level0.6Vrms
Test Speed4 times/second, 1.5 times/second
Comparator1 sets, compare main specifications
AdjustmentOpen/short scan frequency reset for each range
InterfaceBuild-in Mini-USB interface (virtual interface)
Charging interface
Others2.8 inch real color 16M color TFT-LCD display, touch screen, data retention function, USB communication, compatible SCPI instruction set, middle and English switching, backlight adjustment, automatic shutdown
Power RequirementsInput: 100~240V, 50/60Hz, 0.35A
Output: 9V 1A DC 7.4V
Li, 1300mAh Rechargeable battery
CertificationCE
Size (mm)91 (W) x 194 (H) x 40 (D)

Panel Details

Panel Details of Hand-held LCR Meter, 100Hz~100kHz

Dimension Drawing

Dimension Drawing of Hand-held LCR Meter, 100Hz~100kHz

Tips: Handheld LCR meter battery replacement.

  1. Use a cross screwdriver to remove screws on the bottom case of handheld LCR meter and open the bottom case.
  2. Remove the battery from battery slot under the motherboard for replacement.
  3. Battery must be rechargeable lithium battery with standard model.
  4. Cover the bottom case and screw on, replacement is complete.

If the handheld LCR meter is not used for more than three months, or the external power adapter is always used for operation, remove the battery to prevent it leakage from corroding circuit board and causing damage to LCR meter.

Product reviews
Incredible value
5
Phil Owens
Avatar
7/12/2021 1:03 AM
I really needed an instrument for measuring inductors and this handheld LCR meter works perfectly, allowing me to accurately test my data project. It is a quality instrument and for the price of a real bargain.
Was this review helpful? Yes No (0/0)
Great and accurate handheld LCR meter
5
Michael
Avatar
4/19/2022 3:06 AM
Good for the price! I used it to determine unknown inductances, capacitances and resistance. Then compare the results with a professional equipment and it has good accuracy. Very useful LCR Meter!
Was this review helpful? Yes No (0/0)
The handheld LCR meter is beautiful and sturdy
5
Juwan
Avatar
5/16/2022 3:57 AM
This is a very well made multimeter and I definitely recommend this multimeter, it is well made and of high quality. I was also impressed by the high quality of the meter itself.
Was this review helpful? Yes No (0/0)
The LCR meter is a must-have tool in my toolkit
5
Patrick
Avatar
6/2/2022 1:41 AM
I am very happy to order this handheld LCR meter. easy to check and build components, easy to use, clear display, good accuracy, I have a protective bag.
Was this review helpful? Yes No (0/0)
Good value LCR meter
5
Gabino
Avatar
10/24/2022 1:51 AM
I checked the marked values of some precision inductors that the LCR meter measured and I marked them all, then I checked some inductors that I bought for the crossover network that I am building and the LCR meter measured them all exactly as marked and I very satisfied.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • 2.8-inch true color LCD display with high brightness.
  • USB communication function, built-in Mini-USB interface (virtual serial port). Comparison function of a set of recorded main specifications.
  • Switchable attachment (AUX) sequencing correction function: open and short circuit scan frequency removal in full range.
  • 7.4V, 1300mAh charging interface serial port for rechargeable lithium batteries.

Specification

ModelATO-LCRM-825ATO-LCRM-826
Test SpecificationsL, C, R, Z
Monitoring SpecificationsD, Q, θ (deg), θ (rad) ESR
Accuracy0.20%
Frequency
100Hz, 120Hz, 1kHz, 10kHz, 100kHz100Hz, 120Hz, 1kHz, 10kHz
Display Range
L: 0.01μH~9999H
Q: 0.0001~9999
C: 0.01pF~9999μF
θ (deg): -179.99°~179.99°
R, Z: 0.0001Ω~99.99MΩ
θ (rad): -3.1416~3.1416
D: 0.001~9.999
L: 0.01μH~9999H
Q: 0.0001~9999
C: 0.01pF~9999μF
θ (deg): -179.99°~179.99°
R, Z: 0.0001Ω~99.99MΩ
θ (rad): -3.1416~3.1416
D: 0.001~9.999
Source Resistance
100Ω
RangeAutomatic or Manual
Maximum Reading5 bits of main specification and 5 bit display of sub specification
Signal Level0.6Vrms
Test Speed4 times/second, 1.5 times/second
Comparator1 sets, compare main specifications
AdjustmentOpen/short scan frequency reset for each range
InterfaceBuild-in Mini-USB interface (virtual interface)
Charging interface
Others2.8 inch real color 16M color TFT-LCD display, touch screen, data retention function, USB communication, compatible SCPI instruction set, middle and English switching, backlight adjustment, automatic shutdown
Power RequirementsInput: 100~240V, 50/60Hz, 0.35A
Output: 9V 1A DC 7.4V
Li, 1300mAh Rechargeable battery
CertificationCE
Size (mm)91 (W) x 194 (H) x 40 (D)

Panel Details

Panel Details of Hand-held LCR Meter, 100Hz~100kHz

Dimension Drawing

Dimension Drawing of Hand-held LCR Meter, 100Hz~100kHz

Tips: Handheld LCR meter battery replacement.

  1. Use a cross screwdriver to remove screws on the bottom case of handheld LCR meter and open the bottom case.
  2. Remove the battery from battery slot under the motherboard for replacement.
  3. Battery must be rechargeable lithium battery with standard model.
  4. Cover the bottom case and screw on, replacement is complete.

If the handheld LCR meter is not used for more than three months, or the external power adapter is always used for operation, remove the battery to prevent it leakage from corroding circuit board and causing damage to LCR meter.

Product reviews
Incredible value
5
Phil Owens
Avatar
7/12/2021 1:03 AM
I really needed an instrument for measuring inductors and this handheld LCR meter works perfectly, allowing me to accurately test my data project. It is a quality instrument and for the price of a real bargain.
Was this review helpful? Yes No (0/0)
Great and accurate handheld LCR meter
5
Michael
Avatar
4/19/2022 3:06 AM
Good for the price! I used it to determine unknown inductances, capacitances and resistance. Then compare the results with a professional equipment and it has good accuracy. Very useful LCR Meter!
Was this review helpful? Yes No (0/0)
The handheld LCR meter is beautiful and sturdy
5
Juwan
Avatar
5/16/2022 3:57 AM
This is a very well made multimeter and I definitely recommend this multimeter, it is well made and of high quality. I was also impressed by the high quality of the meter itself.
Was this review helpful? Yes No (0/0)
The LCR meter is a must-have tool in my toolkit
5
Patrick
Avatar
6/2/2022 1:41 AM
I am very happy to order this handheld LCR meter. easy to check and build components, easy to use, clear display, good accuracy, I have a protective bag.
Was this review helpful? Yes No (0/0)
Good value LCR meter
5
Gabino
Avatar
10/24/2022 1:51 AM
I checked the marked values of some precision inductors that the LCR meter measured and I marked them all, then I checked some inductors that I bought for the crossover network that I am building and the LCR meter measured them all exactly as marked and I very satisfied.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews