Explosion Proof Wind Speed Transmitter, 4-20mA/0-10V/RS485

$498.76
Explosion-proof wind speed transmitter is suitable for air velocity measurement or neutral gas velocity measurement, and complies with the EX db IIC T6 Gb explosion-proof standard. It supports 4-20mA, 0-10VDC, RS485 and multiple signal outputs. Air velocity transmitter has an IP65 protection grade and is widely used in petroleum, chemical, mining, gas transportation and other industries.
SKU: ATO-EWST-LFS71
*
*
*
Free Shipping
Delivery date: 6-12 days

The explosion-proof air velocity transmitter can convert the flow rate of gas into an electrical signal and transmit it to the control system. The wind speed range can be adjusted using the zero point button on site.

Features

  • Explosion-proof wind speed transmitter adopts a high-precision MEMS micro-pressure core, high precision and wide operating temperature range.
  • The air velocity transmitter is equipped with an LCD digital display, which has a clear display and is convenient for real-time monitoring of wind speed data.
  • The wind speed transmitter provides an on-site zero point button and an adjustable wind speed range to meet different application requirements.
  • The explosion-proof duct air velocity transmitter has strong stability, long service life, and reduces maintenance costs.
  • It uses an IP65 protection grade housing and has good dust and water resistance.

Specification

ModelATO-LFS71
MediumAir or neutral gas
RangeSpeed: 0~10m/s,0~20m/s,0~30m/s, 0~40m/s (Range can be customized)
Over Voltage10KPa
Accuracy±3.0%FS (speed >3m/s)
Operating TemperatureHost machine: -20℃~80℃
Probe: -40℃~450℃
Compensation Temperature-10℃~60℃
Storage TemperatureHost machine: -40℃~85℃
Response Time0.5s (default) /1.0s/2s/4s
Protection GradeIP65
Pressure ConnectionStainless steel 1/2" quick connection
Signal Output4-20mA/0-10VDC/RS485
Power Supply12~30VDC/24VAC±20%
Power Consumption≤1.5W
Shell MaterialCast aluminum
CommunicationRS-485 standard interface, Modbus RTU protocol
CertificatesROHS, CE
Explosion-Proof GradeEX db IIC T6 Gb
DisplayLCD digital display
Weight (Approximate)Host machine: 1238g


Dimension (mm)

Explosion proof wind speed transmitter dimension

Wiring diagram

Explosion proof wind speed transmitter wiring

Note: Wiring should be done by qualified technicians. When wiring, the transmitter must stop supplying power.

Installation and wiring steps

Explosion proof wind speed transmitter wiring steps

Note: Wiring wire diameter D must meet: 7mm≤D≤12mm

Installation

Explosion proof wind speed transmitter installation

Applications

Explosion proof wind speed transmitter application

Tips: Maintenance of the explosion-proof wind speed transmitter

  • Use a dry or slightly damp soft cloth to wipe to prevent dust and oil from affecting the performance of the equipment.
  • Ensure that the wiring terminals are firm to avoid looseness or oxidation that causes unstable signal transmission.
  • Regularly clean dust or foreign matter on the sensor probe to ensure measurement accuracy.
  • If measurement deviation is found, the on-site zero button can be used for adjustment to ensure accurate data.
  • Regularly check the integrity of the housing to ensure that the explosion-proof performance is not damaged and to ensure safe operation.
Product reviews
Measurement range inquiry
5
Ivank
Avatar
3/11/2026 12:31 AM
Does the ATO-EWST-LFS71 transmitter have a measurement range between 0.1 m/s and 0.5 m/s? I need a 4-20mA or 0-10V output signal.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, the minimum measurement range of this ATO-EWST-LFS71 wind speed sensor is only 0~3 m/s. It does not reach 0.5 m/s.
Very satisfied with this wind sensor
5
Jessica
Avatar
8/24/2026 7:27 PM
We needed a wind speed transmitter with explosion-proof certification for an industrial project. This unit met our requirements and was easy to integrate. The construction quality is good, and the measurement data has remained stable during operation.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

The explosion-proof air velocity transmitter can convert the flow rate of gas into an electrical signal and transmit it to the control system. The wind speed range can be adjusted using the zero point button on site.

Features

  • Explosion-proof wind speed transmitter adopts a high-precision MEMS micro-pressure core, high precision and wide operating temperature range.
  • The air velocity transmitter is equipped with an LCD digital display, which has a clear display and is convenient for real-time monitoring of wind speed data.
  • The wind speed transmitter provides an on-site zero point button and an adjustable wind speed range to meet different application requirements.
  • The explosion-proof duct air velocity transmitter has strong stability, long service life, and reduces maintenance costs.
  • It uses an IP65 protection grade housing and has good dust and water resistance.

Specification

ModelATO-LFS71
MediumAir or neutral gas
RangeSpeed: 0~10m/s,0~20m/s,0~30m/s, 0~40m/s (Range can be customized)
Over Voltage10KPa
Accuracy±3.0%FS (speed >3m/s)
Operating TemperatureHost machine: -20℃~80℃
Probe: -40℃~450℃
Compensation Temperature-10℃~60℃
Storage TemperatureHost machine: -40℃~85℃
Response Time0.5s (default) /1.0s/2s/4s
Protection GradeIP65
Pressure ConnectionStainless steel 1/2" quick connection
Signal Output4-20mA/0-10VDC/RS485
Power Supply12~30VDC/24VAC±20%
Power Consumption≤1.5W
Shell MaterialCast aluminum
CommunicationRS-485 standard interface, Modbus RTU protocol
CertificatesROHS, CE
Explosion-Proof GradeEX db IIC T6 Gb
DisplayLCD digital display
Weight (Approximate)Host machine: 1238g


Dimension (mm)

Explosion proof wind speed transmitter dimension

Wiring diagram

Explosion proof wind speed transmitter wiring

Note: Wiring should be done by qualified technicians. When wiring, the transmitter must stop supplying power.

Installation and wiring steps

Explosion proof wind speed transmitter wiring steps

Note: Wiring wire diameter D must meet: 7mm≤D≤12mm

Installation

Explosion proof wind speed transmitter installation

Applications

Explosion proof wind speed transmitter application

Tips: Maintenance of the explosion-proof wind speed transmitter

  • Use a dry or slightly damp soft cloth to wipe to prevent dust and oil from affecting the performance of the equipment.
  • Ensure that the wiring terminals are firm to avoid looseness or oxidation that causes unstable signal transmission.
  • Regularly clean dust or foreign matter on the sensor probe to ensure measurement accuracy.
  • If measurement deviation is found, the on-site zero button can be used for adjustment to ensure accurate data.
  • Regularly check the integrity of the housing to ensure that the explosion-proof performance is not damaged and to ensure safe operation.
Product reviews
Measurement range inquiry
5
Ivank
Avatar
3/11/2026 12:31 AM
Does the ATO-EWST-LFS71 transmitter have a measurement range between 0.1 m/s and 0.5 m/s? I need a 4-20mA or 0-10V output signal.
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, the minimum measurement range of this ATO-EWST-LFS71 wind speed sensor is only 0~3 m/s. It does not reach 0.5 m/s.
Very satisfied with this wind sensor
5
Jessica
Avatar
8/24/2026 7:27 PM
We needed a wind speed transmitter with explosion-proof certification for an industrial project. This unit met our requirements and was easy to integrate. The construction quality is good, and the measurement data has remained stable during operation.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews