Three-cup anemometer for sale online. Wind speed range 0–30m/s, 0–50m/s, 0–60m/s, output signals pulse/4-20mA/RS485 for selection. The air velocity sensor outputs voltage and current signals by electromagnetic induction, the value and horizontal wind speed are linear relation.
Specification
| Model | ATO-RK100-01G | |
| Supply Voltage | 12–24VDC | 5–24VDC |
| Output | RS485, 4–20mA | Pulse (Pulse high level depends on the supply voltage) |
| Range | 0–30m/s, 0–50m/s, 0–60m/s | |
| Starting Threshold | 0.2m/s | |
| Limit Wind Speed | 70m/s | |
| Accuracy | ±(0.3+0.03V)m/s | |
| Resolution | 0.1m/s | |
| Response Time | <1s | |
| Power Consumption | 20mA@12VDC | |
| Ingress Protection | IP65 | |
| Operating Temperature | –30°C~+70°C | |
| Main Material | Aluminum alloy | |
| Connector | M12 waterproof connector | |
| Surface Treatment | Polyester powder electrostatic spraying (black) | |
| Weight (unpacked) | 410g (Excluding wires) | |
| Storage condition | 10°C–60°C @20%–90%RH | |
Features
- 3-cup anemometer has built-in digital circuit, with strong anti-RFI and EMI ability and automatic temperature compensation function.
- Shell of the wind speed sensor is made of high-strength aluminum alloy, wind cups are made of 304 stainless steel, and the PCB board is coated with anti-corrosion coating. Waterproof and corrosion resistant.
- The wind speed gauge has a sealing ring inside and at the rotating position, which has good sealing performance and prevents water, salt spray and dust from entering.
- The three-cup anemometer has low starting threshold, strong corrosion resistant ability, massive all-metal construction, easy Installation.
3-Cup Anemometer Output Characteristics
- Pulses Output
V=0.5+0.169*F
V: Wind speed,m/s
F: Numberof pulses within 1 second
- Current Output
Characteristic transfer function: V = (1-4)/(20-4)*50 (Range: 0-50m/s)
(where V = wind speed (m/s), I = output Current (mA)

3-Cup Anemometer Dimension Diagram (Unit: mm)

Tips: 0-60m/s anemometer electrical connections
| Connector (Cable) | Pulses/Current/Voltage | RS485 |
| Red | V+ | V+ |
| Black | V- | V- |
| Green | Signal+ | RS485A |
| White | — | RS485B |
Product reviews
Great 3-cup anemometer
Lacano
11/4/2021 1:56 AM
I use this 3-cup anemometer to determine the wind speed to determine whether I can spray pesticides. When I first used it, I thought the wind speed was at least 10 mph, and the gusts were much higher than this. I used it to measure the wind speed. The wind speed was only 4 mph, and the gust was about 9 mph. With this information, I can spray pesticides at ease.
Was this review helpful? (0/0)
Recommended anemometer
Vinod
5/28/2022 8:49 PM
With 3-cup anemometer, I don't need to guess the wind speed all the time. It can measure wind speed very accurately. This new anemometer performs well in maintaining speed, which is worthy of recommendation.
Was this review helpful? (0/0)
Know wind speed
Freudenberg
5/29/2022 7:48 PM
I like this 3-cup anemometer. It is a good lightweight device. It can measure wind speed. I use it on my drone so that I can know the wind speed at any time outside.
Was this review helpful? (0/0)
Calibration of this anemometer sensor
vivian
8/28/2023 11:50 PM
Can you speak more about the calibration of this sensor?
Was this review helpful? (0/0)
Only registered users can write reviews