DS18B20 Digital Temperature Sensor Probe

$39.97
DS18B20 digital temperature sensor probe, accuracy up to 0.5, housing diameter 6*30mm, 6*50mm, 1/2NPT thread and G1/2 thread optional, ds18b20 temperature sensor probe with waterproof design, easy to install, support for 1-wire bus interface, improve the sensor system's ability to resist interference, suitable for harsh environments on-site temperature measurement, price concessions! The price is favorable, bulk purchase is more favorable.
SKU: ATO-TS-DSP
*
This product has a minimum quantity of 2
Free Shipping
Delivery date: 6-12 days

This ds18b20 digital temperature sensor probe is pre-wired and waterproof (with heat shrink). The digital temperature sensor probe can be used for objects that need to be measured at a distance or in wet environments, and can also be used in 3.0-5.0V systems. This sensor probe is very convenient, with a temperature-limited alarm system, multiple sensor probes can share a common pin, and the unique design of the single-wire interface requires only a single digital pin for communication.

Specification

ModelATO-TS-GTS200
Digital ChipDS18B20
Sensor TypeSemiconductor Temperature Sensor
Powered3.0~5.5VDC
Output SignalDigital
Resolution9 to 12 Bits
WireUL series
ConnectorMolex, JST, DuPont, CWB, CJT, U-type Terminal Blocks, etc.
Temperature Range-50~125℃
Working Temperature100°C
MaterialMixture
HousingStainless Steel, Copper Nickel-plated, Copper, Aluminum, ABS, PVC, Epoxy Resin
Accuracy0.5
CasingHeat Shrinkable Tubing, PVC Tubing, Glass Fiber Tubing, Teflon Tubing
Wiring MethodBlack: GND/ Yellow: DATA/ Red: VDD+
Housing Diameter and Length6*30MM/ 6*50MM (Available Options)
Net Weight100g


Details

DS18B20 digital temperature sensor probe details

Dimensions (unit: mm)

DS18B20 digital temp sensor probe 6x30 size

DS18B20 digital temp sensor probe 6x50 size

DS18B20 digital temp sensor probe 1 2NPT size

DS18B20 digital temp sensor probe G1 2 size


Application

DS18b20 digital temp sensor probe application

Tips: Precautions for Using the DS18B20 Temperature Sensor Probe

Although the ds18b20 temperature sensor probe can operate at a maximum temperature of 125°C, the cable is PVC-jacketed, so we recommend that it is kept below 100°C. The ds18b20 temperature sensor probe is digital, so there is no signal degradation, even over long distances. As the DS18B20 temperature sensor probes are digital, there is no signal degradation even over long distances.

These single-wire ds18b20 digital temperature sensor probes are quite accurate (±0.5°C range in most cases), and the on-board digital-to-analog converter provides up to 12-bit accuracy, allowing them to be used with any microcontroller that uses a single digital pin, or even multiple sensors connected to the same pin, with a unique 64-bit ID logged at the factory on each sensor probe to differentiate it from other temperature sensor probes.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

This ds18b20 digital temperature sensor probe is pre-wired and waterproof (with heat shrink). The digital temperature sensor probe can be used for objects that need to be measured at a distance or in wet environments, and can also be used in 3.0-5.0V systems. This sensor probe is very convenient, with a temperature-limited alarm system, multiple sensor probes can share a common pin, and the unique design of the single-wire interface requires only a single digital pin for communication.

Specification

ModelATO-TS-GTS200
Digital ChipDS18B20
Sensor TypeSemiconductor Temperature Sensor
Powered3.0~5.5VDC
Output SignalDigital
Resolution9 to 12 Bits
WireUL series
ConnectorMolex, JST, DuPont, CWB, CJT, U-type Terminal Blocks, etc.
Temperature Range-50~125℃
Working Temperature100°C
MaterialMixture
HousingStainless Steel, Copper Nickel-plated, Copper, Aluminum, ABS, PVC, Epoxy Resin
Accuracy0.5
CasingHeat Shrinkable Tubing, PVC Tubing, Glass Fiber Tubing, Teflon Tubing
Wiring MethodBlack: GND/ Yellow: DATA/ Red: VDD+
Housing Diameter and Length6*30MM/ 6*50MM (Available Options)
Net Weight100g


Details

DS18B20 digital temperature sensor probe details

Dimensions (unit: mm)

DS18B20 digital temp sensor probe 6x30 size

DS18B20 digital temp sensor probe 6x50 size

DS18B20 digital temp sensor probe 1 2NPT size

DS18B20 digital temp sensor probe G1 2 size


Application

DS18b20 digital temp sensor probe application

Tips: Precautions for Using the DS18B20 Temperature Sensor Probe

Although the ds18b20 temperature sensor probe can operate at a maximum temperature of 125°C, the cable is PVC-jacketed, so we recommend that it is kept below 100°C. The ds18b20 temperature sensor probe is digital, so there is no signal degradation, even over long distances. As the DS18B20 temperature sensor probes are digital, there is no signal degradation even over long distances.

These single-wire ds18b20 digital temperature sensor probes are quite accurate (±0.5°C range in most cases), and the on-board digital-to-analog converter provides up to 12-bit accuracy, allowing them to be used with any microcontroller that uses a single digital pin, or even multiple sensors connected to the same pin, with a unique 64-bit ID logged at the factory on each sensor probe to differentiate it from other temperature sensor probes.

Only registered users can write reviews