Digital clamp meter has AC current range 0-400A, TRMS/NCV/temperature/capacitance functions, maximum jaw opening size 25mm, 4 digit display and maximum value 5999.
Specification:
| Basics | Model | ATO-UA2019C | |
| Weight | 0.4kg | ||
| Size (L*W*H) | 184*66*32.5mm | ||
| Display | 4 digit LCD display | ||
| Maximum display value | 5999 | ||
| Power supply | DC 4.5V, 3 AAA batteries | ||
| Maximum jaw opening size | 25mm | ||
| Woring environment | Temperature: 18℃~28℃ (64.4℉~82.4℉), relative humidity:<75% | ||
| Storage temperature | -10℃~+50℃ (14℉~122℉) | ||
| Accessories | A pair of test probes, a pair of temperature probes, a user manual, 3 AAA batteries | ||
| Functions | Item | Range | Accuracy |
| AC current | 400A | ±(1.5%+5 digits) | |
| DC voltage | 600V | ±(1.0%+5 digits) | |
| AC voltage | 600V | ±(1.2%+5 digits) | |
| Resistance | 10MΩ | ±(1.0%+2 digits) | |
| Frequency | 1000kHz | ±(0.3%+5 digits) | |
| Capacitance | 100mF | ±(4.0%+3 digits) | |
| Temperature | -40℃~+1000℃ (-40℉~1832℉) | ±(1.0%+3 digits) | |
| Special functions | TRMS | True RMS measurement for sine wave signal | |
| NCV | Non-contact voltage test, with buzzer and indicator | ||
| Diode test | Display forward voltage value of diode | ||
| On-off buzzer | Continuity test buzzer | ||
| Data hold | Hold the reading when taking a measurement | ||
| Automatic power off | Automatic power off when 15 minutes no operation | ||
| Overload protection | Overload protection for 100% range | ||
| Range selection | Automatic range selection and manual range selection | ||
| Back light | Back light for LCD display | ||
| Inspection light | Inspection light for clamp operation | ||
Details

Tips: How to measure AC current with a clamp meter?
The clamp meter is a special digital multimeter with clamp head for current measurement. So make sure that the test probes are removed from the clamp meter when using the clamp head to measure AC current. Then follow the operation steps below step by step.
- Rotate the measurement function selection dial to the AC current.
- Press the trigger to open the clamp, pass the wire to be measured into the centre of the clamp, and then slowly release the trigger until the clamp is fully closed.
- Read the measurement result from the LCD.
Note: The clamp meter can only measure one current conductor at a time. If two or more current conductors are measured at the same time, the measurement will be inaccurate.
Product reviews
The clamp meter is cheap and accurate
Josiah
5/30/2022 12:09 AM
I bought this clamp meter to test various automotive gears and the digital clamp meter works great when I need to check current draw, great value if you need high accuracy and only want something very close!
Was this review helpful? (0/0)
Satisfied with this digital clamp meter
Wade
2/28/2023 1:36 AM
As an electrician, I recently purchased a digital clamp meter for my toolbox. The device is lightweight, compact, and easy to use, with a large LCD screen that displays accurate readings in real time.
Was this review helpful? (0/0)
Only registered users can write reviews