Two Diaphragms Coupling, 8mm to 16mm

$146.98
8mm to 16mm shaft coupler with 2 diaphragms, length 50mm x width 39mm, shaft and sleeve connection without clearance, suitable for forward and reverse rotation, used to connect servo motors, stepper motors and encoders.
SKU: ATO-SC-GLM3950
*
*
*
Free Shipping
Delivery date: 6-12 days

Two diaphragms coupling bore 8mm to 16mm, rated torque 10 N.m, internal clamping, easy installation. Shaft sleeve made of high-strength aluminum alloy, high torque, can accurately control shaft rotation.

Specification

ModelATO-SC-GLM3950
Length50mm
Width39mm
Bore8mm to 16mm
Rated Torque10 N.m
Allow Eccentricity0.22mm
Allowable Deflection Angle1.5∠°
Allowable Axial Deviation±0.45
Allowable Speed10000 RPM
Static Torsional Stiffness4050N.m/rad
Moment of Inertia3.0 x 10-5
Weight125g
CertificateISO9001, REACH, RoHS
Warranty12 Months


Bore 8mm to 16mm Diaphragm Coupling Dimension (unit: mm)

Shaft coupling dimension

d1/d2 Inner Diameter SizeΦdLLFLPSφd3FMTightening Torque
8-9-9.52-10-11-12-12.7-14-15-16395014.911.24.517.56.0M43.5 N.m


Details

Diaphragm coupling split graph


Keyway

Shaft DiameterKeyway Standard Machining DimensionsKeyway Size
d1/d2bt(bXh)
Width of grooveToleranceDepth of grooveTolerance
φ6~φ7.92±0.01251±0.102x2
φ8~φ1031.43x3
φ10.1~φ124±0.01501.84x4
φ12.1~φ1752.35x5
φ17.1~φ2262.86x6
φ22.1~φ308±0.01803.3±0.208x7
φ30.1~φ38103.310x8
φ38.1~φ4412±0.02153.312x8
φ44.1~φ50143.814x9
φ50.1~Ф58164.316x10
φ58.1~φ65184.418x11


Keyway Machining Standard Drawing

Diaphragm coupling keyway dimension

Tips: How to install the diaphragm coupling?

  1. Wipe clean the dust and dirt on the surface of the installation shaft, and apply a thin layer of engine oil or lubricant.
  2. Clean the inner hole of the diaphragm coupling, and apply oil or lubricant.
  3. Insert the diaphragm coupling into the installation shaft; if the aperture is too tight, be careful not to hit the installation with a hammer or hard metal.
  4. After the positioning is completed, first press the diagonal direction and gently tighten the screw with a torque wrench (the specified tightening torque 1/4).
  5. Increase the strength (1/2 of the specified tightening torque) and repeat the fourth step.
  6. Tighten the tightening torque according to the specified tightening torque.
  7. Finally, tighten the fixing screws in the circumferential direction.
  8. When disassembling, please proceed with the device completely stopped, loosen the locking screws one by one.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Great designed diaphragm coupling
5
Keith
Avatar
4/13/2022 3:00 AM
The coupling bore I bought is 8mm to 16mm, they clamp tightly and get the job done, everything is real, what a beautiful design, the look is smooth, concentric, no backlash, worth buying again.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Two diaphragms coupling bore 8mm to 16mm, rated torque 10 N.m, internal clamping, easy installation. Shaft sleeve made of high-strength aluminum alloy, high torque, can accurately control shaft rotation.

Specification

ModelATO-SC-GLM3950
Length50mm
Width39mm
Bore8mm to 16mm
Rated Torque10 N.m
Allow Eccentricity0.22mm
Allowable Deflection Angle1.5∠°
Allowable Axial Deviation±0.45
Allowable Speed10000 RPM
Static Torsional Stiffness4050N.m/rad
Moment of Inertia3.0 x 10-5
Weight125g
CertificateISO9001, REACH, RoHS
Warranty12 Months


Bore 8mm to 16mm Diaphragm Coupling Dimension (unit: mm)

Shaft coupling dimension

d1/d2 Inner Diameter SizeΦdLLFLPSφd3FMTightening Torque
8-9-9.52-10-11-12-12.7-14-15-16395014.911.24.517.56.0M43.5 N.m


Details

Diaphragm coupling split graph


Keyway

Shaft DiameterKeyway Standard Machining DimensionsKeyway Size
d1/d2bt(bXh)
Width of grooveToleranceDepth of grooveTolerance
φ6~φ7.92±0.01251±0.102x2
φ8~φ1031.43x3
φ10.1~φ124±0.01501.84x4
φ12.1~φ1752.35x5
φ17.1~φ2262.86x6
φ22.1~φ308±0.01803.3±0.208x7
φ30.1~φ38103.310x8
φ38.1~φ4412±0.02153.312x8
φ44.1~φ50143.814x9
φ50.1~Ф58164.316x10
φ58.1~φ65184.418x11


Keyway Machining Standard Drawing

Diaphragm coupling keyway dimension

Tips: How to install the diaphragm coupling?

  1. Wipe clean the dust and dirt on the surface of the installation shaft, and apply a thin layer of engine oil or lubricant.
  2. Clean the inner hole of the diaphragm coupling, and apply oil or lubricant.
  3. Insert the diaphragm coupling into the installation shaft; if the aperture is too tight, be careful not to hit the installation with a hammer or hard metal.
  4. After the positioning is completed, first press the diagonal direction and gently tighten the screw with a torque wrench (the specified tightening torque 1/4).
  5. Increase the strength (1/2 of the specified tightening torque) and repeat the fourth step.
  6. Tighten the tightening torque according to the specified tightening torque.
  7. Finally, tighten the fixing screws in the circumferential direction.
  8. When disassembling, please proceed with the device completely stopped, loosen the locking screws one by one.
Product reviews
Great designed diaphragm coupling
5
Keith
Avatar
4/13/2022 3:00 AM
The coupling bore I bought is 8mm to 16mm, they clamp tightly and get the job done, everything is real, what a beautiful design, the look is smooth, concentric, no backlash, worth buying again.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews