Two Diaphragms Coupling, 12mm to 25mm

$179.86
Shaft coupling bore 12mm to 25mm, 2 diaphragms, diameter 56mm, length 64mm, low inertia, high speed rotation, used to connect servo motors, stepping motors, encoders, screw drives, machine platforms, etc.
SKU: ATO-SC-GLM5664
*
*
*
Free Shipping
Delivery date: 6-12 days

Dual diaphragm coupling diameter 56mm, length 64mm, bore 12mm to 25mm, speed 10000rpm, shaft and sleeve connection without clearance, suitable for forward and reverse rotation.

Specification

ModelATO-SC-GLM5664
Length64mm
Width56mm
Bore12mm to 25mm
Rated Torque25 N.m
Allow Eccentricity0.27mm
Allowable Deflection Angle1.5∠°
Allowable Axial Deviation±0.72
Allowable Speed10000 RPM
Static Torsional Stiffness9000N.m/rad
Moment of Inertia1.6 x 10-4
Weight320g
CertificateISO9001, REACH, RoHS
Warranty12 Months


Bore 12mm to 25mm Diaphragm Coupling Dimension (unit: mm)

Shaft coupling dimension

d1/d2 Inner Diameter SizeΦdLLFLPSφd3FMTightening Torque
10-11-12-12.7-14-15-16-17-18-19-20-22-25566419.7513.55.5268M58 N.m


Details

Diaphragm coupling split graph


Keyway

Shaft DiameterKeyway Standard Machining DimensionsKeyway Size
d1/d2bt(bXh)
Width of grooveToleranceDepth of grooveTolerance
φ6~φ7.92±0.01251±0.102x2
φ8~φ1031.43x3
φ10.1~φ124±0.01501.84x4
φ12.1~φ1752.35x5
φ17.1~φ2262.86x6
φ22.1~φ308±0.01803.3±0.208x7
φ30.1~φ38103.310x8
φ38.1~φ4412±0.02153.312x8
φ44.1~φ50143.814x9
φ50.1~Ф58164.316x10
φ58.1~φ65184.418x11


Keyway Machining Standard Drawing

Diaphragm coupling keyway dimension

Tips: What causes abnormal noise in the diaphragm coupling?

  1. The gap between the two halves of the coupling is too wide, causing the diaphragm to receive a large axial force, and the stranded hole or stranded bolt is worn out, causing abnormal noise.
  2. Excessive axial offset or too large deflection angle of the two halves of the coupling will also cause vibration and abnormal noise during equipment operation.
  3. When the speed of the active end and the passive end are different, it will also cause vibration and abnormal noise during the operation of the equipment.
  4. The speed code disc of the motor is faulty, which causes the speed of the motor to be fast and slow, and the diaphragm coupling makes abnormal noise.
Product reviews
Stable Connection
5
Ansel
Avatar
10/11/2026 7:10 PM
I used this shaft coupling to connect a servo motor to a lead screw. The low-inertia design supports smooth rotation at high speeds, while the dual-diaphragm structure keeps the connection stable during operation.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Dual diaphragm coupling diameter 56mm, length 64mm, bore 12mm to 25mm, speed 10000rpm, shaft and sleeve connection without clearance, suitable for forward and reverse rotation.

Specification

ModelATO-SC-GLM5664
Length64mm
Width56mm
Bore12mm to 25mm
Rated Torque25 N.m
Allow Eccentricity0.27mm
Allowable Deflection Angle1.5∠°
Allowable Axial Deviation±0.72
Allowable Speed10000 RPM
Static Torsional Stiffness9000N.m/rad
Moment of Inertia1.6 x 10-4
Weight320g
CertificateISO9001, REACH, RoHS
Warranty12 Months


Bore 12mm to 25mm Diaphragm Coupling Dimension (unit: mm)

Shaft coupling dimension

d1/d2 Inner Diameter SizeΦdLLFLPSφd3FMTightening Torque
10-11-12-12.7-14-15-16-17-18-19-20-22-25566419.7513.55.5268M58 N.m


Details

Diaphragm coupling split graph


Keyway

Shaft DiameterKeyway Standard Machining DimensionsKeyway Size
d1/d2bt(bXh)
Width of grooveToleranceDepth of grooveTolerance
φ6~φ7.92±0.01251±0.102x2
φ8~φ1031.43x3
φ10.1~φ124±0.01501.84x4
φ12.1~φ1752.35x5
φ17.1~φ2262.86x6
φ22.1~φ308±0.01803.3±0.208x7
φ30.1~φ38103.310x8
φ38.1~φ4412±0.02153.312x8
φ44.1~φ50143.814x9
φ50.1~Ф58164.316x10
φ58.1~φ65184.418x11


Keyway Machining Standard Drawing

Diaphragm coupling keyway dimension

Tips: What causes abnormal noise in the diaphragm coupling?

  1. The gap between the two halves of the coupling is too wide, causing the diaphragm to receive a large axial force, and the stranded hole or stranded bolt is worn out, causing abnormal noise.
  2. Excessive axial offset or too large deflection angle of the two halves of the coupling will also cause vibration and abnormal noise during equipment operation.
  3. When the speed of the active end and the passive end are different, it will also cause vibration and abnormal noise during the operation of the equipment.
  4. The speed code disc of the motor is faulty, which causes the speed of the motor to be fast and slow, and the diaphragm coupling makes abnormal noise.
Product reviews
Stable Connection
5
Ansel
Avatar
10/11/2026 7:10 PM
I used this shaft coupling to connect a servo motor to a lead screw. The low-inertia design supports smooth rotation at high speeds, while the dual-diaphragm structure keeps the connection stable during operation.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews