Wire Wound Ceramic Braking Resistor

$51.54
Ceramic braking resistor (wire wound resistor) uses high temperature resistant mullite porcelain tube as the winding base, 50W~6000W rated power for selection, optional resistance in 1Ω~3000Ω. Dielectric voltage reaches AC2.5kV/1min 50Hz. It adopts high temperature resistant, flame retardant and insulating inorganic coating to effectively protect the resistance wire from oxidation, long service life and affordable price.
SKU: ATO-WWR-56
*
*
Free Shipping
Delivery date: 6-12 days

Features

  • Rated power can be up to 6000W, resistance can be up to 3000Ω.
  • Inorganic coating is flame-retardant, strong overload capacity, can withstand 10 times the rated power within 5 seconds.
  • Vertical corrugated structure, low parasitic inductance, high resistance with flat wound.

Specification

ModelATO-WWR-56
Tolerance±5%, ±1% available
Max.Work Voltage(P*R)1/2 V
Temperature Coefficient400 PPM/℃
Short Time Overload5xPn (rated power) in 5 seconds
Dielectric VoltageAC2.5kV/1min 50Hz
Insulation ResistanceDC500V, R≥100MΩ
CertificationCE, RoHS
Terminal Strength200N 30s, no damage
Operating Temperature Range-25℃~+225℃

Derating Curve Diagram of Ceramic Braking Resistor

Derating Curve Diagram of Ceramic Braking Resistor

Temp. Rise Curve Diagram of Ceramic Braking Resistor

Temp. Rise Curve Diagram of Ceramic Braking Resistor

Tips: Classification and characteristics of wire wound ceramic braking resistors.

  1. Vertical corrugated wire-wound ceramic resistor: larger heat dissipation area, can withstand higher pulse voltage, short hedging time, but strong adaptability in use environment with high pulse voltage. By adopting the reverse double winding method, non-inductive winding resistance can be manufactured, and the parasitic inductance is effectively reduced.
  2. Sliding adjustable ceramic resistor: Zero to maximum resistance can be adjusted. By sliding the middle slider, an adjustable resistance is obtained to control the output of circuit current.
  3. Flat-wound ceramic resistor: High-resistance resistors, resistances up to 20000 ohms, which is suitable for high-resistance environments.

Wire Wound Ceramic Braking Resistor Dimensions

Wire Wound Ceramic Braking Resistor Dimensions

Rated Power (@25℃) WResistance Range ΩDimension (mm)
L1 (±3)L2 (±3)L3 (±3)R (±2)H (±2)Φ (±0.5)D (±0.5)
500.1~27009013214628524.56
1000.1~270016720222428654.56
1500.1~270021525727128654.56
2000.1~270026730232428654.56
3000.1~2700267302342409266
4000.1~2700330362378409566
5000.1~270033035637550986.57
8000.1~27004304504625012067.5
10000.1~2700430455482601206.58.5
12000.1~2700360393422701356.58.5
15000.1~2700360393422701356.58.5
20000.1~2700430463492701356.58.5
25000.1~2700430473492801456.58.5
30000.1~2700600633662701356.58.5
35000.1~27004304554909015089
40000.1~270043047351010015689
50000.1~270050054358010015689
60000.1~270054058362010015689
Product reviews
Buy ceramic brake resistors for electric trains
5
farbod
Avatar
1/18/2022 4:08 AM
Hello
Used in electric trains?
Documentation with photos please
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, I don't understand what electric train you are talking about. Please email our technical staff and describe your needs carefully.
Wire Wound Ceramic Braking Resistor
5
farbod
Avatar
1/27/2022 7:42 AM
Hello
How much temperature does the coating on the piece withstand?
Was this review helpful? Yes No (1/0)
ATO Responded
The resistance is 450°C when it is not working, and 350°C when it is working steadily.
wire wound braking resistor
5
karthika
Avatar
6/20/2022 1:24 AM
what is the percent of cyclic duration factor(cdf) for plotting the above "time vs temperature" graph
Was this review helpful? Yes No (0/0)
Easy to install and maintain
5
Borg
Avatar
3/14/2023 6:58 PM
I recently purchased a wire wound ceramic braking resistor for use in my electric motor drive, and I have been extremely satisfied with its performance. The resistor is well-built and feels very durable, and it has been able to handle the high amounts of energy generated during braking with ease.
Was this review helpful? Yes No (0/0)
Braking resistor
5
Berkner
Avatar
8/3/2026 2:56 AM
I plan to use a GK3000-2S0015 frequency converter (VFD) to drive a metal lathe equipped with a 1 hp three-phase motor. For quick stopping, is this braking resistor suitable?
Was this review helpful? Yes No (0/0)
ATO Responded
You can use this braking resistor, ATO-WWR-56, select a 200Ω, 500W braking resistor.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Rated power can be up to 6000W, resistance can be up to 3000Ω.
  • Inorganic coating is flame-retardant, strong overload capacity, can withstand 10 times the rated power within 5 seconds.
  • Vertical corrugated structure, low parasitic inductance, high resistance with flat wound.

Specification

ModelATO-WWR-56
Tolerance±5%, ±1% available
Max.Work Voltage(P*R)1/2 V
Temperature Coefficient400 PPM/℃
Short Time Overload5xPn (rated power) in 5 seconds
Dielectric VoltageAC2.5kV/1min 50Hz
Insulation ResistanceDC500V, R≥100MΩ
CertificationCE, RoHS
Terminal Strength200N 30s, no damage
Operating Temperature Range-25℃~+225℃

Derating Curve Diagram of Ceramic Braking Resistor

Derating Curve Diagram of Ceramic Braking Resistor

Temp. Rise Curve Diagram of Ceramic Braking Resistor

Temp. Rise Curve Diagram of Ceramic Braking Resistor

Tips: Classification and characteristics of wire wound ceramic braking resistors.

  1. Vertical corrugated wire-wound ceramic resistor: larger heat dissipation area, can withstand higher pulse voltage, short hedging time, but strong adaptability in use environment with high pulse voltage. By adopting the reverse double winding method, non-inductive winding resistance can be manufactured, and the parasitic inductance is effectively reduced.
  2. Sliding adjustable ceramic resistor: Zero to maximum resistance can be adjusted. By sliding the middle slider, an adjustable resistance is obtained to control the output of circuit current.
  3. Flat-wound ceramic resistor: High-resistance resistors, resistances up to 20000 ohms, which is suitable for high-resistance environments.
Product reviews
Buy ceramic brake resistors for electric trains
5
farbod
Avatar
1/18/2022 4:08 AM
Hello
Used in electric trains?
Documentation with photos please
Was this review helpful? Yes No (0/0)
ATO Responded
Sorry, I don't understand what electric train you are talking about. Please email our technical staff and describe your needs carefully.
Wire Wound Ceramic Braking Resistor
5
farbod
Avatar
1/27/2022 7:42 AM
Hello
How much temperature does the coating on the piece withstand?
Was this review helpful? Yes No (1/0)
ATO Responded
The resistance is 450°C when it is not working, and 350°C when it is working steadily.
wire wound braking resistor
5
karthika
Avatar
6/20/2022 1:24 AM
what is the percent of cyclic duration factor(cdf) for plotting the above "time vs temperature" graph
Was this review helpful? Yes No (0/0)
Easy to install and maintain
5
Borg
Avatar
3/14/2023 6:58 PM
I recently purchased a wire wound ceramic braking resistor for use in my electric motor drive, and I have been extremely satisfied with its performance. The resistor is well-built and feels very durable, and it has been able to handle the high amounts of energy generated during braking with ease.
Was this review helpful? Yes No (0/0)
Braking resistor
5
Berkner
Avatar
8/3/2026 2:56 AM
I plan to use a GK3000-2S0015 frequency converter (VFD) to drive a metal lathe equipped with a 1 hp three-phase motor. For quick stopping, is this braking resistor suitable?
Was this review helpful? Yes No (0/0)
ATO Responded
You can use this braking resistor, ATO-WWR-56, select a 200Ω, 500W braking resistor.
Only registered users can write reviews
Customers who bought this item also bought

5 hp VFD, Single Phase to Three Phase VFD

GK3000-2S0037
$294.31
5hp variable frequency drive, single phase to three phase VFD, 17 amps, RS485 enabled, shipping weight 4kg, manufacturer direct sale.

7.5 hp VFD, Single Phase to Three Phase VFD

GK3000-2S0055G
$697.14
7.5 hp variable frequency drive, single phase to three phase VFD, 28 amps, RS485 enabled, manufacturer direct sale.

800W Wind Turbine MPPT Charge Controller, 12V/24V/48V

ATO-WTCMPPT-800
$169.23
Wind mppt charge controller for wind turbine generator, 800W, 12V or 24V is optional, the wind controller makes the wind power system safe, stable, reliable and has a long service life. Wind mppt charge controller automatically recognizes 12V/24V/48V battery.

30 hp VFD, 1-Phase 220V to 3-Phase 380V VFD

GK3000-CS0220G
$2,455.97
30 hp VFD for sales, converts 1-phase 220V input to 3-phase 380V output, 45A rated current, 50Hz/ 60Hz input frequency, 0-400Hz output frequency. It can be used as a motor speed controller and a frequency inverter.