Cantilever Beam Load Cell, 500kg/1000kg/2 ton/3 ton/5 ton

$150.79
Cantilever beam load cell is a six-wire strain gauge tension and compression load cell with high accuracy and low price. Beam load cell has the standard size and fits to replace the same load cells of the mixing plant. ATO cantilever beam load cells are available for weight or force measurement from 500kg/1000kg/2 ton/3 ton to 5ton.
SKU: ATO-LC-B03
*
Free Shipping
Delivery date: 6-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Cheap cantilever beam load cells have capacity range from 500kg/1000kg/2 ton/3 ton to 5 ton. Capacity of Load cell can be customized according to customer's requirements.

Specification

ModelATO-LCB-DYHLJ
Shipping Weight1.1~5kg
Capacity Range *500kg/1000kg/2 ton/3 ton/5 ton
Matched Display ControllerATO-DDC5-CHB (Click it to the controller page)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Accuracy0.03%F.S (linearity + hysteresis + repeatability)
Sensitivity2.0±0.1mV/V
Creep±0.02%F.S/30Min
Zero Output±1%F.S
Temperature Effect on Zero±0.002%F.S/10℃
Temperature Effect on Output±0.002%F.S/10℃
Operating Temperature-20℃~+60℃
Input Resistance380±4Ω
Output Resistance350±1Ω
Insulation Resistance≥5000MΩ
Safety Overload150%FS
Bridge voltage (excitation voltage)DC 5-15V
MaterialAlloy steel
Protection ClassIP67
Cable Length2m (<5ton), 5m (≥5ton)
WiringEXC+: Green, EXN+: Yellow, SIG+: White, EXC-: Black, EXN-: Blue, SIG-: Red.
Shielded wire: Yellow.


Feature

Cantilever beam load cell 500kg to 5ton feature

  • High Precision & Sensitivity: Offers high detection precision and excellent sensitivity, ensuring reliable force measurements.
  • Durable Construction: Made from 42CrMo alloy steel, known for its high strength and wear resistance, ensuring long-term durability.
  • Stable Performance: Designed for long-term stability with strong resistance to bias load, suitable for accurate weighing and measurement.
  • Waterproof & Reliable Signal: Features a 6-point waterproof connector, preventing wire pull-out and ensuring stable signal transmission.
  • Wide Application: Ideal for platform scales, hopper scales, tank scales, and various other industrial weighing systems with high stability and precision.

Wiring Diagram

Cantilever beam load cell wiring instruction

Dimensional Drawing

Cantilever beam load cell dimension

500kg to 5 ton cantilever beam load cell dimension

CapacityDimension (mm)
ABCDEFGH
500kg/1 ton133.476.225.416.430.73057.917
2 ton136.776.225.416.736.836.657.923
3 ton139.779.225.416.73936.657.923
5 ton171.595.238.116.742.94373.829.4

CapacityDimension (mm)
KMNPQS
500kg/1 ton4.812.72215.93.17.7
2 ton9.512.72215.93.111.7
3 ton9.5152215.93.111.7
5 ton111934.922.23.111.7


Application

Beam load cell application

Tips: How do I know if my Cantilever Beam Load Cell is working properly?

To check if your load cell is functioning correctly:

  • Verify output signal: Ensure the output signal is within the expected range for the applied load.
  • Perform calibration: Test the accuracy using known reference weights or forces.
  • Check for physical damage: Inspect for cracks, corrosion, or other signs of wear.
  • Monitor performance over time: Track consistency and make adjustments if readings become erratic.

In this video, ATO will show you how to wire a strain gauge load cell with a display controller.

Low Profile Micro Compression Button Load Cell 100kg
This video introduces the specs, design features and applications of a low profile miniature button load cell DYHW-110 that's intended for compression force measurement. The maximum load capacity it can bear is 100kg. It can achieve 0.5%F.S accuracy with 150%F.S safety overload and temperature compensation.

Shear Beam Load Cell | Single & Double-Ended, Weighbridge Load Cells

The shear beam load cell is a common load cell. Its working principle is based on the deformation of the elastomer when it is acted upon by an external force. This deformation will cause the resistance of the elastomer to change, thereby achieving the measurement of the external force. It is typically used to measure forces in the small to medium range and its working principle is based on the shear effect of elastically deforming materials. This type of force measuring element is usually made of metal or polymer materials. Because of its high elastic modulus and shear modulus, it can produce stable shear deformation when subjected to external forces.

How to Ensure the Accuracy of Your Weighing System?

This video describes five factors that affect the accuracy of a weighing system and provides recommendations for selecting, installing, and operating the system to handle these factors.

Load Cell Transmitter 4~20mA Output Calibration

This video demonstrates how to calibrate the 4~20mA output. The 0~10V is also calibrated in the same way.

How Does PLC Read Data of Load Cell Transmitter?

In this video, it shows how PLC reads data from sensor transmitter. This system mainly consists of PLC, ATO load cell transmitter, ATO load cell, 24VDC power supply, personal computer, etc.

Product reviews
Good beam load cell for replacement
5
Ian
Avatar
7/2/2019 9:03 PM
The original beam load cell is broken, so we specifically looking for a new 500kg load cell on ATO. Its size is exactly the same as the old one. We can directly replace the broken load cell without readjustment. The ATO beam load cell has fine workmanship, good stability, high accuracy and quick response. We are very satisfied and will purchase it next time.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

Cheap cantilever beam load cells have capacity range from 500kg/1000kg/2 ton/3 ton to 5 ton. Capacity of Load cell can be customized according to customer's requirements.

Specification

ModelATO-LCB-DYHLJ
Shipping Weight1.1~5kg
Capacity Range *500kg/1000kg/2 ton/3 ton/5 ton
Matched Display ControllerATO-DDC5-CHB (Click it to the controller page)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Accuracy0.03%F.S (linearity + hysteresis + repeatability)
Sensitivity2.0±0.1mV/V
Creep±0.02%F.S/30Min
Zero Output±1%F.S
Temperature Effect on Zero±0.002%F.S/10℃
Temperature Effect on Output±0.002%F.S/10℃
Operating Temperature-20℃~+60℃
Input Resistance380±4Ω
Output Resistance350±1Ω
Insulation Resistance≥5000MΩ
Safety Overload150%FS
Bridge voltage (excitation voltage)DC 5-15V
MaterialAlloy steel
Protection ClassIP67
Cable Length2m (<5ton), 5m (≥5ton)
WiringEXC+: Green, EXN+: Yellow, SIG+: White, EXC-: Black, EXN-: Blue, SIG-: Red.
Shielded wire: Yellow.


Feature

Cantilever beam load cell 500kg to 5ton feature

  • High Precision & Sensitivity: Offers high detection precision and excellent sensitivity, ensuring reliable force measurements.
  • Durable Construction: Made from 42CrMo alloy steel, known for its high strength and wear resistance, ensuring long-term durability.
  • Stable Performance: Designed for long-term stability with strong resistance to bias load, suitable for accurate weighing and measurement.
  • Waterproof & Reliable Signal: Features a 6-point waterproof connector, preventing wire pull-out and ensuring stable signal transmission.
  • Wide Application: Ideal for platform scales, hopper scales, tank scales, and various other industrial weighing systems with high stability and precision.

Wiring Diagram

Cantilever beam load cell wiring instruction

Dimensional Drawing

Cantilever beam load cell dimension

500kg to 5 ton cantilever beam load cell dimension

CapacityDimension (mm)
ABCDEFGH
500kg/1 ton133.476.225.416.430.73057.917
2 ton136.776.225.416.736.836.657.923
3 ton139.779.225.416.73936.657.923
5 ton171.595.238.116.742.94373.829.4

CapacityDimension (mm)
KMNPQS
500kg/1 ton4.812.72215.93.17.7
2 ton9.512.72215.93.111.7
3 ton9.5152215.93.111.7
5 ton111934.922.23.111.7


Application

Beam load cell application

Tips: How do I know if my Cantilever Beam Load Cell is working properly?

To check if your load cell is functioning correctly:

  • Verify output signal: Ensure the output signal is within the expected range for the applied load.
  • Perform calibration: Test the accuracy using known reference weights or forces.
  • Check for physical damage: Inspect for cracks, corrosion, or other signs of wear.
  • Monitor performance over time: Track consistency and make adjustments if readings become erratic.
Product reviews
Good beam load cell for replacement
5
Ian
Avatar
7/2/2019 9:03 PM
The original beam load cell is broken, so we specifically looking for a new 500kg load cell on ATO. Its size is exactly the same as the old one. We can directly replace the broken load cell without readjustment. The ATO beam load cell has fine workmanship, good stability, high accuracy and quick response. We are very satisfied and will purchase it next time.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

Strain Gauge Load Cell, S type, 5kg/50kg/1000kg/3 ton to 20 ton

ATO-LC-S01
$88.41
S type load cell can bear both tension and pressure, with good output symmetry, high accuracy, compact structure and complete specifications. Strain gauge load cell can be applied for batching scale, electronic-mechanical scale, crane scales and other force value measurement and control.

Load Cell Junction Box for Scales, 2/3/4/6/8/10 Inlets to 1 Outlet

ATO-LCBOX-10I
$66.67
Multi-channel load cell junction box has 2/3/4/6/8/10 inlets and 1 outlet, aluminum alloy casing, good anti-interference, special for waterproof sealing joint, waterproof and dustproof rubber gasket for cover, easy to assemble and debug. Each channel can be adjusted balance to prevent damage to the sensor caused by inductive lightning and surge signals.