Compression Button Load Cell 5kg/10kg/20kg/30kg/50kg/100kg

$131.75
Button load cell is a compression load cell with a diameter 10mm. It has capacity range from 5kg, 10kg, 20kg, 30kg, 50kg to 100kg. Button load cell can be used for 3C product testing, medical testing, automated equipment testing, etc. It can also be customized for the high-temperature working condition.
SKU: ATO-LC-BU02
*
*
*
Free Shipping
Delivery date: 6-12 days

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

A compression button load cell is a precision measuring device primarily used to measure small changes in weight or pressure. When an external force acts on the sensor, the metal structure will undergo slight deformation, which will cause the strain gauge to output a weak electrical signal. This electrical signal is then amplified, filtered and analyzed by a data acquisition system, and ultimately converted into a readable numerical or graphical display.

Button load cells have capacity range from 5kg, 10kg, 20kg, 30kg, 50kg to 100kg. Load cell capacity can be customized according to customer requirements.

Specification

ModelATO-LCBU-DYHW-110
Shipping Weight1kg
Capacity Range *0~100kg
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Accuracy0.5%F.S (linearity + hysteresis + repeatability)
Sensitivity1.0-2.0mV/V (Low range variations may differ)
Creep±0.1%F.S/30min
Zero Output±2%F.S
Temperature Effect on Zero±0.2%F.S/10℃
Temperature Effect on Output±0.2%F.S/10℃
Operating Temperature-20℃~+80℃
Input Impedance350Ω
Output Impedance500Ω
Insulation Resistance≥5000MΩ
Safety Overload150%F.S
Bridge Voltage (excitation voltage)DC 5-15V
MaterialStainless steel
Protection ClassIP66
Cable Length2m
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Feature

Button load cell 5kg to 100kg feature

  • Compact & Versatile: Small size, easy integration, and multiple size options for diverse needs.
  • High Accuracy: Delivers precise and consistent measurements.
  • Reliable & Stable: Ensures dependable performance for long-term use.
  • Effortless Installation: Quick and simple setup, saving time.
  • Durable Build: Made with robust 17-4 PH stainless steel for strength and longevity.
  • Resistant to Harsh Conditions: Withstands heat and wear, maintaining stable performance.
  • Long-lasting: Provides durable, stable, and accurate measurements over time.
  • Superior Wiring: 2.0mm diameter wires designed to resist pulling and weathering.
  • Precision Sensing: High-accuracy sensing chip for reliable measurements in various environments.

Dimension (unit: mm)

Compression Button Load Cell 5kg/10kg/20kg/30kg/50kg/100kg dimension

Wiring Method

Load cell wiring method

Application

Button load cell 5kg to 100kg application

Tips: How do I select the right compression button load cell?

The following factors should be considered when making a selection:

  • Load capacity: Ensure that the load cell selected is suitable for measuring the maximum load required.
  • Accuracy requirements: Different applications require different accuracy levels.
  • Operating environment: such as temperature, humidity and chemical exposure, select a load cell that is corrosion, vibration or high temperature resistant.
  • Output type: Select the appropriate type of signal output (e.g. analog or digital) for the needs of the device or system.

In this video, ATO will show you how to wire a strain gauge load cell with a display controller.

Low Profile Micro Compression Button Load Cell 100kg
This video introduces the specs, design features and applications of a low profile miniature button load cell DYHW-110 that's intended for compression force measurement. The maximum load capacity it can bear is 100kg. It can achieve 0.5%F.S accuracy with 150%F.S safety overload and temperature compensation.

Shear Beam Load Cell | Single & Double-Ended, Weighbridge Load Cells

The shear beam load cell is a common load cell. Its working principle is based on the deformation of the elastomer when it is acted upon by an external force. This deformation will cause the resistance of the elastomer to change, thereby achieving the measurement of the external force. It is typically used to measure forces in the small to medium range and its working principle is based on the shear effect of elastically deforming materials. This type of force measuring element is usually made of metal or polymer materials. Because of its high elastic modulus and shear modulus, it can produce stable shear deformation when subjected to external forces.

How to Ensure the Accuracy of Your Weighing System?

This video describes five factors that affect the accuracy of a weighing system and provides recommendations for selecting, installing, and operating the system to handle these factors.

Load Cell Transmitter 4~20mA Output Calibration

This video demonstrates how to calibrate the 4~20mA output. The 0~10V is also calibrated in the same way.

How Does PLC Read Data of Load Cell Transmitter?

In this video, it shows how PLC reads data from sensor transmitter. This system mainly consists of PLC, ATO load cell transmitter, ATO load cell, 24VDC power supply, personal computer, etc.

Product reviews
About compression button load cell
5
Carla
Avatar
4/22/2021 8:28 PM
I just called asking if we would also get the cable of the load cell together with the ordered items? Will the load cell come precalibrated?
Was this review helpful? Yes No (0/0)
ATO Responded
1. Yes, 2 meter cable is attached with the load cell.
2. The load cell will be calibrated before leaving the factory.
Use of load cell
5
Stevene
Avatar
9/27/2021 8:41 PM
Will your compression and tension load cell like SKU: ATO-LC-P02 work for both tension and compression for the same application/installation?
If yes, then what will be the difference if it is subjected to tension then to compression for the same application/installation?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the load cell SKU: ATO-LC-P02 can work for both tension and compression in the same application/installation.
Its output signal has positive and negative points (maybe the tension is +, and the compression is -), if you switch the SIGN+/SING- wiring of the weighing sensor, you can switch this ±.
So when the sensor outputs 0V, it corresponds to zero load, and when it outputs ± 20mV, it corresponds to full tension or compression.
Load cell wiring
5
Ailsa
Avatar
5/30/2022 12:14 AM
The question is about the ends of the sensors. One sensor has all 4 wires and a shielding wire. The other has no shielding wire and seems to be taped up. Is this something to be concerned about?
Was this review helpful? Yes No (0/0)
ATO Responded
The lack of shielded wire will have no effect. You can leave the shielded wire unconnected, and the sensor can be used normally.
Mounting for Compression Loadcell
5
Spencer
Avatar
4/18/2023 3:52 PM
The photo, pdf catalogue, and drawing don't clarify this, but what is the mounting for this compression/button-type loadcell (SKU: ATO-LC-BU02)? Press fit? Single M6 bolt concentric with the center of the loadcell? 3 M3 screws circularly patterned at x diameter?
Was this review helpful? Yes No (0/0)
ATO Responded
Its installation method is mosaic, please consult our technical team for specific installation details.
Consultation
5
Ounifi
Avatar
10/17/2025 3:57 AM
As part of a project, we need to measure the force exerted by a cylinder on a product. The force varies between 0 and 40 kg, and the sensor will be installed on the cylinder. We need a solution capable of measuring and reporting data for 9,600 pieces per day.
Was this review helpful? Yes No (0/0)
ATO Responded
The page you are on is not suitable for your needs, but we have a recommended solution. Please contact sales@ato.com or service@ato.com to describe your needs and leave a message.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

After purchasing one ATO load cell, you can buy a special digital panel meter to obtain readings directly, or buy a transmitter to output standard signal to PLC, DCS and other systems. Customized output signal is 0-5V, 0-10V, or 4-20mA.

Note: The load cell cannot be connected to both the transmitter and the controller at the same time — only one can be selected.

A compression button load cell is a precision measuring device primarily used to measure small changes in weight or pressure. When an external force acts on the sensor, the metal structure will undergo slight deformation, which will cause the strain gauge to output a weak electrical signal. This electrical signal is then amplified, filtered and analyzed by a data acquisition system, and ultimately converted into a readable numerical or graphical display.

Button load cells have capacity range from 5kg, 10kg, 20kg, 30kg, 50kg to 100kg. Load cell capacity can be customized according to customer requirements.

Specification

ModelATO-LCBU-DYHW-110
Shipping Weight1kg
Capacity Range *0~100kg
Matched Display ControllerATO-DPM-DY800 (Click it to the controller page)
Matched TransmitterATO-LCTR-OA (Click it to the transmitter page)
Accuracy0.5%F.S (linearity + hysteresis + repeatability)
Sensitivity1.0-2.0mV/V (Low range variations may differ)
Creep±0.1%F.S/30min
Zero Output±2%F.S
Temperature Effect on Zero±0.2%F.S/10℃
Temperature Effect on Output±0.2%F.S/10℃
Operating Temperature-20℃~+80℃
Input Impedance350Ω
Output Impedance500Ω
Insulation Resistance≥5000MΩ
Safety Overload150%F.S
Bridge Voltage (excitation voltage)DC 5-15V
MaterialStainless steel
Protection ClassIP66
Cable Length2m
WiringEXC+: Red, EXC-: Black, SIG+: Green, SIG-: White


Feature

Button load cell 5kg to 100kg feature

  • Compact & Versatile: Small size, easy integration, and multiple size options for diverse needs.
  • High Accuracy: Delivers precise and consistent measurements.
  • Reliable & Stable: Ensures dependable performance for long-term use.
  • Effortless Installation: Quick and simple setup, saving time.
  • Durable Build: Made with robust 17-4 PH stainless steel for strength and longevity.
  • Resistant to Harsh Conditions: Withstands heat and wear, maintaining stable performance.
  • Long-lasting: Provides durable, stable, and accurate measurements over time.
  • Superior Wiring: 2.0mm diameter wires designed to resist pulling and weathering.
  • Precision Sensing: High-accuracy sensing chip for reliable measurements in various environments.

Dimension (unit: mm)

Compression Button Load Cell 5kg/10kg/20kg/30kg/50kg/100kg dimension

Wiring Method

Load cell wiring method

Application

Button load cell 5kg to 100kg application

Tips: How do I select the right compression button load cell?

The following factors should be considered when making a selection:

  • Load capacity: Ensure that the load cell selected is suitable for measuring the maximum load required.
  • Accuracy requirements: Different applications require different accuracy levels.
  • Operating environment: such as temperature, humidity and chemical exposure, select a load cell that is corrosion, vibration or high temperature resistant.
  • Output type: Select the appropriate type of signal output (e.g. analog or digital) for the needs of the device or system.
Product reviews
About compression button load cell
5
Carla
Avatar
4/22/2021 8:28 PM
I just called asking if we would also get the cable of the load cell together with the ordered items? Will the load cell come precalibrated?
Was this review helpful? Yes No (0/0)
ATO Responded
1. Yes, 2 meter cable is attached with the load cell.
2. The load cell will be calibrated before leaving the factory.
Use of load cell
5
Stevene
Avatar
9/27/2021 8:41 PM
Will your compression and tension load cell like SKU: ATO-LC-P02 work for both tension and compression for the same application/installation?
If yes, then what will be the difference if it is subjected to tension then to compression for the same application/installation?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, the load cell SKU: ATO-LC-P02 can work for both tension and compression in the same application/installation.
Its output signal has positive and negative points (maybe the tension is +, and the compression is -), if you switch the SIGN+/SING- wiring of the weighing sensor, you can switch this ±.
So when the sensor outputs 0V, it corresponds to zero load, and when it outputs ± 20mV, it corresponds to full tension or compression.
Load cell wiring
5
Ailsa
Avatar
5/30/2022 12:14 AM
The question is about the ends of the sensors. One sensor has all 4 wires and a shielding wire. The other has no shielding wire and seems to be taped up. Is this something to be concerned about?
Was this review helpful? Yes No (0/0)
ATO Responded
The lack of shielded wire will have no effect. You can leave the shielded wire unconnected, and the sensor can be used normally.
Mounting for Compression Loadcell
5
Spencer
Avatar
4/18/2023 3:52 PM
The photo, pdf catalogue, and drawing don't clarify this, but what is the mounting for this compression/button-type loadcell (SKU: ATO-LC-BU02)? Press fit? Single M6 bolt concentric with the center of the loadcell? 3 M3 screws circularly patterned at x diameter?
Was this review helpful? Yes No (0/0)
ATO Responded
Its installation method is mosaic, please consult our technical team for specific installation details.
Consultation
5
Ounifi
Avatar
10/17/2025 3:57 AM
As part of a project, we need to measure the force exerted by a cylinder on a product. The force varies between 0 and 40 kg, and the sensor will be installed on the cylinder. We need a solution capable of measuring and reporting data for 9,600 pieces per day.
Was this review helpful? Yes No (0/0)
ATO Responded
The page you are on is not suitable for your needs, but we have a recommended solution. Please contact sales@ato.com or service@ato.com to describe your needs and leave a message.
Only registered users can write reviews
Customers who bought this item also bought

5 Digit Display Controller for Load Cells

ATO-DPM-LC5D
$210.80
Digital panel meter can cooperate with load cells, force sensors and weighing sensors, two outputs for data comparison, digital panel meter can display gross, net, peak and valley value alternately.

Tension and Compression Load Cell, 1 kg - 500 kg

ATO-LC-TC01
$137.98
Tension and compression load cell can bear both tension and pressure, with good anti-eccentric load performance, low height, all sealed structure and complete specifications. Miniature load cell with optional capacity 1 kg/ 100kg/ 200 kg/ 300kg/ 500 kg is suited to use in restricted spaces, such as using in vehicle/test instrument/laminator measurement and control.

Load Cell Junction Box for Scales, 2/3/4/6/8/10 Inlets to 1 Outlet

ATO-LCBOX-10I
$66.67
Multi-channel load cell junction box has 2/3/4/6/8/10 inlets and 1 outlet, aluminum alloy casing, good anti-interference, special for waterproof sealing joint, waterproof and dustproof rubber gasket for cover, easy to assemble and debug. Each channel can be adjusted balance to prevent damage to the sensor caused by inductive lightning and surge signals.

5 Digit Load Cell Display Controller, 2 Realy Output

ATO-DPM-TY5DA3
$120.66
5 digit display controller is specially designed for load cell and weighing sensors. This digital panel meter provides 100V~240V AC power supply, 1~4 channels of ±20mV signal input and 2 way relay signal output, suitable for weight control, auto accumulation/mean for up/down batch control, etc. 4 measurement units of N, kN, kg, and T can be switched.

Load Cell Transmitter, Output 0-5V/0-10V/4-20mA

ATO-LCTR-OA
$81.27
Load cell transmitter is made of aluminum alloy, output standard signal 0-5V/0-10V/4-20mA, has linear compensation, humidity compensation, external zero debugging, external span debugging, input overload protection and output short circuit protection functions.