The set value or switching point of the air differential pressure switch can be adjusted on-site by simply using the adjustment knob and the built-in calibrated visual scale. This switch is equipped with a clear cover that not only protects the adjustment knob scale from changes, but also provides IP54 protection. Repeated switch experiments ensure the long service life of the switch.
Specification
| Model | ATO-LF32-02 | ATO-LF32-03 | ATO-LF32-04 | ATO-LF32-05 | ATO-LF32-10 | ATO-LF32-11 | ATO-LF32-25 | ATO-LF32-50 |
| Measurement range | 20-200 (Pa) | 30-300 (Pa) | 40-400 (Pa) | 50-500 (Pa) | 200-1000 (Pa) | 100-1000 (Pa) | 500-2500 (Pa) | 1000-5000 (Pa) |
| Pressure difference | 10 (Pa) | 10 (Pa) | 20 (Pa) | 20 (Pa) | 100 (Pa) | 50 (Pa) | 150 (Pa) | 250 (Pa) |
| Error range | ≤±15% | |||||||
| Rated voltage | 250V | |||||||
| Rated current | 1.5A (0.4) | |||||||
| Withstand voltage | 700psi | |||||||
| Medium | Air, non-flammable or non-hazardous gas | |||||||
| Upper limit of working pressure | 10kPa | |||||||
| Installation method | Vertical installation | |||||||
| Protection level | IP54 (with housing), IP00 (without housing) | |||||||
| Working temperature | -40℃~+85℃ | |||||||
| Contact method | SPDT | |||||||
| Electrical parameters | Initial contact resistance <100 milliohms | |||||||
| Terminal block | 6.3mm straight plug terminal or screw connection | |||||||
| Interface type | 6.0mm outer diameter hose | |||||||
Dimension (mm)

Applications

Tips: Application scope of air differential pressure switch
- Fire ventilation duct system: used to control the ventilation duct in the fire protection system to ensure that the duct pressure is within the safe range.
- Air filter system: monitor the cooling and heating system of the air filter to ensure the normal operation of the equipment.
- Industrial electronic circuit cooling system: used to monitor the cooling system of the industrial electronic circuit to ensure that the equipment is not damaged by overheating.
- Positive pressure monitoring of the pressurized room: used to monitor the positive pressure state of the pressurized room to ensure that the system operates within the safe pressure range.
- Heater air volume monitoring: used for the air volume monitoring of the heater, providing overheat protection to prevent equipment damage.
- Heat exchanger antifreeze protection: monitor the pressure changes of the heat exchanger, provide antifreeze protection, and prevent equipment damage due to low temperature.
Only registered users can write reviews