5 kVA 100 kV AC DC automatic hipot tester can directly measure the AC leakage current on the high voltage side, the range is 0-50ma, if you want to measure the DC high voltage side (0-140kV) leakage current, you need to add an additional DC milliampere meter, the range is 0-1.999ma.
Control Module Specifications
- Model: ATO-HTGTB-5100A
- Power Supply: AC 220V±10%, 50/60Hz
- Rated Power: 5kVA
- Output Voltage: 0~250V
- Input Current: 0~22.7A
- Time Range: 0-9999S
- Voltage Resolution: 0.1kV
- Current Resolution: 0.1mA
- Measurement Accuracy: ≤2%
- Ambient Temperature: 0~40℃
- Ambient Humidity: RH≤85%
- Gross Weight: 29kgs
- Package Dimension: 500*370*450mm
Test Transformer (HV Unit) Specifications
- Output Voltage Waveform: Sine Wave
- Output Waveform Distortion Rate: ≤1%.
- No-Load Loss: 0.2%~0.35%
- Induced Voltage Level: 1.1Uo/1min.
- Surface Temperature Rise: <55℃
- Rated Capacity: 5kVA
- Rated Input Voltage: 0~200V
- Rated Input Current: 25A
- Testing Voltage: AC 100kV
- Rated Output Current: 50mA
- Output DC High Voltage: 140kV
- Hipot Time: 1min
- Gross Weight: 94kgs
- Package Dimension: 500*430*1230mm
- Permissible Continuous Operating Time at Rated Capacity: 0.5 hours (Long-Running Transformers Can be Ordered)
- Consecutive Running Times: Below 10kVA, Each Interval of 2 Hours, Allows Continuous Operation of 0.5 hours; Above 15kVA, Every 4 hours, Allowing Continuous Operation for 0.5 hours; Allows Continuous Operation for 4 hours at Half Rated Voltage And Half Rated Current.
Panel Descriptions
- There are miniature thermal printers in AC and DC high voltage test equipment. Press the print button on the panel to print out the results.
- The contrast of the LCD display can be adjusted.
- Turn on the indicator light, which will light up when the test starts.
- Zero indicator light. When the voltage regulator is at the zero position, this lamp will light.
- Alarm indicator. When a fault or protective action occurs, the light is on.
- LCD screen, 320X240 dot matrix, white backlight.
- Wiring diagram, refer to the wiring diagram for AC and DC testing.
- Keyboard, interactive terminal between user and device.
- Buzzer, sound alarm.
- Emergency stop button, press this button to cut off the power and end.

AC Test Wiring Diagram
DC Test Wiring Diagram
Note:
CM: Control box
TT: Test transformer
WR:Water resistance
TO: Test object
GM: Diode
Product reviews
Everyone can buy this 5kVA hipot tester
Derrick
12/13/2021 7:56 PM
I bought this 5kVA hipot tester from ATO.com for the first time, and the customer service is very good. I tried it after receiving the product, and the quality was very good. The testing process is very stable and has been shared with those around you who need it. Everyone can buy it.
Was this review helpful? (0/0)
Only registered users can write reviews