1/2 Inch Electro-Pneumatic Pressure Regulator, 50~9000 mbar

$443.38
Air electronic pressure regulator with ideal price. High pressure range 50~9000 mbar (130.5 psi), high flow 4000L/min, working voltage DC 24V, input signal current 4~20mA or voltage DC 0~10V for configuration, analog DC 1~5V/switch output, connection hose 1/2 inch. Proportional pneumatic pressure regulator valve with electronic digital LED, low cost.
SKU: ATO-PPPR-9012
*
*
*
*
*
*
*
Free Shipping
Delivery date: 6-12 days

ATO proportional electro-pneumatic pressure regulator with reasonable price. Pressure adjustment range 50~9000 mbar (130.5 psi), rated voltage DC 24V, current/voltage signal input, analog/switch output, hose size 1/2”. The electronic proportional pressure regulator is also a digital air pressure valve, which has the functions of pressure reducer valves or hydraulic valves, saving the cost for pneumatic control system.

Specification

ModelATO-NITV305
Minimum supply pressureSet pressure + 1000 mbar (+0.1 MPa)
Maximum supply pressure10000 mbar (1 MPa)
Set pressure range50~9000 mbar (0.005 to 0.9 MPa )
Max. Flow4000L/min
Power supplyVoltageDC 24V ± 10%, DC 12~15V
Current consumptionPower supply voltage DC 24V type: 0.12 A or less
Power supply voltage DC 12~15V type: 0.18 A or less
Input signalCurrent type *Note 1DC 4~20mA, DC 0~20mA (Sink type)
Voltage typeDC 0~5V, DC 0~10V
Preset input4 points (Negative common), 16 points (No common polarity)
Input impedanceCurrent type250 Ω or less *Note 4
Voltage typeApprox. 6.5 kΩ
Digital inputPower supply voltage DC 24V type: Approx. 4.7 kΩ.
Power supply voltage DC 12V type: Approx. 2.0 kΩ
Output signal (monitor output) *Note 2Analog outputDC 1~5V (Output impedance: Approx. 1 kΩ)
DC 4~20mA (Sink type) (Output impedance: 250 Ω or less) Output accuracy ± 6% F.S. or less
Switch outputNPN open collector output: Max. 30V, 80mA PNP open collector output: Max. 80mA
Linearity± 1% F.S. or less
Hysteresis0.5% F.S. or less
Repeatability± 0.5% F.S. or less
Sensitivity0.2% F.S. or less
Temperature characteristics± 0.12% F.S./ ℃ or less
Output pressure display *Note 3Accuracy± 2% F.S. ± 1 digit or less
Minimum unitMpa: 0.001, kgf/cm2: 0.01, bar: 0.01, psi: 0.1, kPa: 1
Ambient and fluid temperature0 to 50℃ (No condensation)
Enclosureip65
Port size1/2 inch, 1/4 inch, 3/8 inch
Weight645 g (without options)

*Note

  1. 2-wire type 4 to 20 mA DC is not available. Power supply voltage (DC 24V or DC 12~15V) is required.
  2. Select either analog output or switch output. Further, when switch output is selected, select either NPN output or PNP output. When measuring NITV analog output from 1 to 5 VDC, if the load impedance is less than 100 kΩ, the analog output monitor accuracy of within ±6% (full span) may not be available. The product with the accuracy of within ±6% is supplied upon your request. Output pressure remains unaffected.
  3. Adjustment of numerical values such as the zero/span adjustment or preset input type is set based on the minimum units for output pressure display (e.g. 10~5000 mbar). Note that the unit cannot be changed.
  4. Value for the state with no over current circuit included. If an allowance is provided for an over current circuit, the input impedance varies depending on the input current. This is 350Ω or less for an input current of 20mA DC.

Features

  1. Electroc-pneumatic pressure regulator adopts electrical proportional method to achieve stepless control of outlet pressure. It can realize remote control and program control.
  2. Compared with hydraulic proportional valves, proportional pressure regulators are small in size, light in weight, compact in structure, light in weight and low in cost.
  3. The control of proportional air pressure regulator is continuous control, and its characteristic is that the output quantity changes with the change of input quantity (current value or voltage value), and there is a certain proportional relationship between the output and input.
  4. Proportional pneumatic pressure regulator has many types, which can be used with various electrical equipment and computers to control various electro-hydraulic systems. High control precision, flexible installation and strong anti-pollution ability.

50~9000 mbar Air Pressure Regulator Dimensions (Unit: mm)

  • Electro-Pneumatic Pressure Regulator with Flat Bracket*

Dimensions of 50~9000 mbar 1/2 inch Proportional Pressure Regulator with Flat Bracket

  • Electro-Pneumatic Pressure Regulator with L-Shape Bracket*

Dimensions of 50~9000 mbar 1/2 inch Proportional Pressure Regulator with L-shape bracket

*Note: The bracket is the option.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
So far so good!
5
Mark
Avatar
5/6/2022 12:20 AM
I was using the cheap regulator and was always disappointed in the pressure in our worksite.  Adjusted the pressure, and this proportional pressure regulator is working great! Will report if there are any problems.
Was this review helpful? Yes No (0/0)
Some questions
5
Vicona
Avatar
8/20/2025 12:46 AM
I'd like to know if I can use an analog setpoint to set the pressure. Do I need a continuous signal? Or can I disconnect the analog signal once the setting is complete?
Was this review helpful? Yes No (0/0)
ATO Responded
This air pressure regulator can set the pressure via an analog input signal. It requires a continuous signal, and if the signal is disconnected, the output stops.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

ATO proportional electro-pneumatic pressure regulator with reasonable price. Pressure adjustment range 50~9000 mbar (130.5 psi), rated voltage DC 24V, current/voltage signal input, analog/switch output, hose size 1/2”. The electronic proportional pressure regulator is also a digital air pressure valve, which has the functions of pressure reducer valves or hydraulic valves, saving the cost for pneumatic control system.

Specification

ModelATO-NITV305
Minimum supply pressureSet pressure + 1000 mbar (+0.1 MPa)
Maximum supply pressure10000 mbar (1 MPa)
Set pressure range50~9000 mbar (0.005 to 0.9 MPa )
Max. Flow4000L/min
Power supplyVoltageDC 24V ± 10%, DC 12~15V
Current consumptionPower supply voltage DC 24V type: 0.12 A or less
Power supply voltage DC 12~15V type: 0.18 A or less
Input signalCurrent type *Note 1DC 4~20mA, DC 0~20mA (Sink type)
Voltage typeDC 0~5V, DC 0~10V
Preset input4 points (Negative common), 16 points (No common polarity)
Input impedanceCurrent type250 Ω or less *Note 4
Voltage typeApprox. 6.5 kΩ
Digital inputPower supply voltage DC 24V type: Approx. 4.7 kΩ.
Power supply voltage DC 12V type: Approx. 2.0 kΩ
Output signal (monitor output) *Note 2Analog outputDC 1~5V (Output impedance: Approx. 1 kΩ)
DC 4~20mA (Sink type) (Output impedance: 250 Ω or less) Output accuracy ± 6% F.S. or less
Switch outputNPN open collector output: Max. 30V, 80mA PNP open collector output: Max. 80mA
Linearity± 1% F.S. or less
Hysteresis0.5% F.S. or less
Repeatability± 0.5% F.S. or less
Sensitivity0.2% F.S. or less
Temperature characteristics± 0.12% F.S./ ℃ or less
Output pressure display *Note 3Accuracy± 2% F.S. ± 1 digit or less
Minimum unitMpa: 0.001, kgf/cm2: 0.01, bar: 0.01, psi: 0.1, kPa: 1
Ambient and fluid temperature0 to 50℃ (No condensation)
Enclosureip65
Port size1/2 inch, 1/4 inch, 3/8 inch
Weight645 g (without options)

*Note

  1. 2-wire type 4 to 20 mA DC is not available. Power supply voltage (DC 24V or DC 12~15V) is required.
  2. Select either analog output or switch output. Further, when switch output is selected, select either NPN output or PNP output. When measuring NITV analog output from 1 to 5 VDC, if the load impedance is less than 100 kΩ, the analog output monitor accuracy of within ±6% (full span) may not be available. The product with the accuracy of within ±6% is supplied upon your request. Output pressure remains unaffected.
  3. Adjustment of numerical values such as the zero/span adjustment or preset input type is set based on the minimum units for output pressure display (e.g. 10~5000 mbar). Note that the unit cannot be changed.
  4. Value for the state with no over current circuit included. If an allowance is provided for an over current circuit, the input impedance varies depending on the input current. This is 350Ω or less for an input current of 20mA DC.

Features

  1. Electroc-pneumatic pressure regulator adopts electrical proportional method to achieve stepless control of outlet pressure. It can realize remote control and program control.
  2. Compared with hydraulic proportional valves, proportional pressure regulators are small in size, light in weight, compact in structure, light in weight and low in cost.
  3. The control of proportional air pressure regulator is continuous control, and its characteristic is that the output quantity changes with the change of input quantity (current value or voltage value), and there is a certain proportional relationship between the output and input.
  4. Proportional pneumatic pressure regulator has many types, which can be used with various electrical equipment and computers to control various electro-hydraulic systems. High control precision, flexible installation and strong anti-pollution ability.

50~9000 mbar Air Pressure Regulator Dimensions (Unit: mm)

  • Electro-Pneumatic Pressure Regulator with Flat Bracket*

Dimensions of 50~9000 mbar 1/2 inch Proportional Pressure Regulator with Flat Bracket

  • Electro-Pneumatic Pressure Regulator with L-Shape Bracket*

Dimensions of 50~9000 mbar 1/2 inch Proportional Pressure Regulator with L-shape bracket

*Note: The bracket is the option.

Product reviews
So far so good!
5
Mark
Avatar
5/6/2022 12:20 AM
I was using the cheap regulator and was always disappointed in the pressure in our worksite.  Adjusted the pressure, and this proportional pressure regulator is working great! Will report if there are any problems.
Was this review helpful? Yes No (0/0)
Some questions
5
Vicona
Avatar
8/20/2025 12:46 AM
I'd like to know if I can use an analog setpoint to set the pressure. Do I need a continuous signal? Or can I disconnect the analog signal once the setting is complete?
Was this review helpful? Yes No (0/0)
ATO Responded
This air pressure regulator can set the pressure via an analog input signal. It requires a continuous signal, and if the signal is disconnected, the output stops.
Only registered users can write reviews