1/4 Inch Electro-Pneumatic Pressure Regulator, -1.3~80 kPa

$353.77
Electro-pneumatic pressure regulator especially for vacuum pressure adjustment. Pressure setting range -1.3~80 kPa (11.6 psi), power supply DC 24V or 12~15V, input signal 4~20mA current or 0~10V voltage, analog/switch output, connection hose diameter 1/4 inch. Vacuum air pressure regulator with electronic digital display, proportional valve, saving cost of various hydraulic valves in pneumatic control system.
SKU: ATO-PPPR-8014
*
*
*
*
*
*
Free Shipping
Delivery date: 6-12 days

Air pressure regulator for vacuum air pressure adjustment. Working pressure range -1.3~80 kPa (max 11.6 psi), rated voltage DC 24V or 12~15V, input signal 4~20mA current or 0~10V voltage, hose port 1/4”. The electronic proportional vacuum pressure regulator is applied in pneumatic system, using analog control replace multistage control. It is saves costs of pressure reducer valve, solenoid valve, hydraulic valve, etc.

Specification

ModelATO-NITV209
Minimum supply vacuumSet pressure - 13.3 kPa (+0.0013.3 Mpa)
Maximum supply vacuum-101 kPa (0.0101 MPa)
Set vacuum range-1.3~-80 kPa (0.0001.3 to 0.0008 MPa )
Max. Flow1500L/min
Power supplyVoltageDC 24V ± 10%, DC 12~15V
Current consumptionPower supply voltage DC 24V type: 0.12 A or less
Power supply voltage DC 12~15V type: 0.18 A or less
Input signalCurrent type *Note 1DC 4~20mA, DC 0~20mA
Voltage typeDC 0~5V, DC 0~10V
Preset input4 points (Negative common)
Input impedanceCurrent type250 Ω or less *Note 4
Voltage typeApprox. 6.5 kΩ
Digital inputPower supply voltage DC 24V type: Approx. 4.7 kΩ.
Power supply voltage DC 12V type: Approx. 2.0 kΩ
Output signal (monitor output) *Note 2Analog outputDC 1~5V (Output impedance: Approx. 1 kΩ)
DC 4~20mA (Sink type) (Output impedance: 250 Ω or less) Output accuracy ± 6% F.S. or less
Switch outputNPN open collector output: Max. 30V, 80mA PNP open collector output: Max. 80mA
Linearity± 1% F.S. or less
Hysteresis0.5% F.S. or less
Repeatability± 0.5% F.S. or less
Sensitivity0.2% F.S. or less
Temperature characteristics± 0.12% F.S./ ℃ or less
Output pressure display *Note 3Accuracy± 2% F.S. ± 1 digit or less
Minimum unitkPa: 1
Ambient and fluid temperature0 to 50℃ (No condensation)
Enclosureip65
Port size1/4 inch

*Note

  1. 2-wire type 4 to 20 mA DC is not available. Power supply voltage (DC 24V or DC 12~15V) is required.
  2. Select either analog output or switch output. Further, when switch output is selected, select either NPN output or PNP output. When measuring NITV analog output from 1 to 5 VDC, if the load impedance is less than 100 kΩ, the analog output monitor accuracy of within ±6% (full span) may not be available. The product with the accuracy of within ±6% is supplied upon your request. Output pressure remains unaffected.
  3. Adjustment of numerical values such as the zero/span adjustment or preset input type is set based on the minimum units for output pressure display.
  4. Value for the state with no over current circuit included. If an allowance is provided for an over current circuit, the input impedance varies depending on the input current. This is 350Ω or less for an input current of 20mA DC.

Features

  1. Proportional air pressure regulator adopts electrical proportional method to achieve stepless control of outlet pressure. It can realize remote control and program control.
  2. Compared with hydraulic proportional valves, proportional pressure regulators are small in size, light in weight, compact in structure, light in weight and low in cost.
  3. The control of electro-pneumatic pressure regulator is continuous control, and its characteristic is that the output quantity changes with the change of input quantity (current value or voltage value), and there is a certain proportional relationship between the output and input.
  4. Proportional air pressure regulator has many types, which can be used with various electrical equipment and computers to control various electro-hydraulic systems. High control precision, flexible installation and strong anti-pollution ability.

Details

Pressure Regulator Details

-1.3~80 kPa Air Pressure Regulator Dimension (Unit: mm)

  • Electro-Pneumatic Pressure Regulator with Flat Bracket*

Dimensions of -1.3~80 kPa 1/4 inch Proportional Pressure Regulator with Flat Bracket

  • Electro-Pneumatic Pressure Regulator with L-Shape Bracket*

Dimensions of -1.3~80 kPa 1/4 inch Proportional Pressure Regulator with L-shape bracket

*Note: The bracket is the option.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
The regulator was easy to install, and performed well.
5
Woody
Avatar
5/6/2022 12:43 AM
The regulator was easy to install, and performed well. I would order this proportional pressure regulator again and would recommend this product. Put this little thing on and was able to adjust it perfectly!
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Air pressure regulator for vacuum air pressure adjustment. Working pressure range -1.3~80 kPa (max 11.6 psi), rated voltage DC 24V or 12~15V, input signal 4~20mA current or 0~10V voltage, hose port 1/4”. The electronic proportional vacuum pressure regulator is applied in pneumatic system, using analog control replace multistage control. It is saves costs of pressure reducer valve, solenoid valve, hydraulic valve, etc.

Specification

ModelATO-NITV209
Minimum supply vacuumSet pressure - 13.3 kPa (+0.0013.3 Mpa)
Maximum supply vacuum-101 kPa (0.0101 MPa)
Set vacuum range-1.3~-80 kPa (0.0001.3 to 0.0008 MPa )
Max. Flow1500L/min
Power supplyVoltageDC 24V ± 10%, DC 12~15V
Current consumptionPower supply voltage DC 24V type: 0.12 A or less
Power supply voltage DC 12~15V type: 0.18 A or less
Input signalCurrent type *Note 1DC 4~20mA, DC 0~20mA
Voltage typeDC 0~5V, DC 0~10V
Preset input4 points (Negative common)
Input impedanceCurrent type250 Ω or less *Note 4
Voltage typeApprox. 6.5 kΩ
Digital inputPower supply voltage DC 24V type: Approx. 4.7 kΩ.
Power supply voltage DC 12V type: Approx. 2.0 kΩ
Output signal (monitor output) *Note 2Analog outputDC 1~5V (Output impedance: Approx. 1 kΩ)
DC 4~20mA (Sink type) (Output impedance: 250 Ω or less) Output accuracy ± 6% F.S. or less
Switch outputNPN open collector output: Max. 30V, 80mA PNP open collector output: Max. 80mA
Linearity± 1% F.S. or less
Hysteresis0.5% F.S. or less
Repeatability± 0.5% F.S. or less
Sensitivity0.2% F.S. or less
Temperature characteristics± 0.12% F.S./ ℃ or less
Output pressure display *Note 3Accuracy± 2% F.S. ± 1 digit or less
Minimum unitkPa: 1
Ambient and fluid temperature0 to 50℃ (No condensation)
Enclosureip65
Port size1/4 inch

*Note

  1. 2-wire type 4 to 20 mA DC is not available. Power supply voltage (DC 24V or DC 12~15V) is required.
  2. Select either analog output or switch output. Further, when switch output is selected, select either NPN output or PNP output. When measuring NITV analog output from 1 to 5 VDC, if the load impedance is less than 100 kΩ, the analog output monitor accuracy of within ±6% (full span) may not be available. The product with the accuracy of within ±6% is supplied upon your request. Output pressure remains unaffected.
  3. Adjustment of numerical values such as the zero/span adjustment or preset input type is set based on the minimum units for output pressure display.
  4. Value for the state with no over current circuit included. If an allowance is provided for an over current circuit, the input impedance varies depending on the input current. This is 350Ω or less for an input current of 20mA DC.

Features

  1. Proportional air pressure regulator adopts electrical proportional method to achieve stepless control of outlet pressure. It can realize remote control and program control.
  2. Compared with hydraulic proportional valves, proportional pressure regulators are small in size, light in weight, compact in structure, light in weight and low in cost.
  3. The control of electro-pneumatic pressure regulator is continuous control, and its characteristic is that the output quantity changes with the change of input quantity (current value or voltage value), and there is a certain proportional relationship between the output and input.
  4. Proportional air pressure regulator has many types, which can be used with various electrical equipment and computers to control various electro-hydraulic systems. High control precision, flexible installation and strong anti-pollution ability.

Details

Pressure Regulator Details

-1.3~80 kPa Air Pressure Regulator Dimension (Unit: mm)

  • Electro-Pneumatic Pressure Regulator with Flat Bracket*

Dimensions of -1.3~80 kPa 1/4 inch Proportional Pressure Regulator with Flat Bracket

  • Electro-Pneumatic Pressure Regulator with L-Shape Bracket*

Dimensions of -1.3~80 kPa 1/4 inch Proportional Pressure Regulator with L-shape bracket

*Note: The bracket is the option.

Product reviews
The regulator was easy to install, and performed well.
5
Woody
Avatar
5/6/2022 12:43 AM
The regulator was easy to install, and performed well. I would order this proportional pressure regulator again and would recommend this product. Put this little thing on and was able to adjust it perfectly!
Was this review helpful? Yes No (0/0)
Only registered users can write reviews