7.5 hp (5.5kW) 3 phase 2 pole AC Induction Motor

$954.25
Three phase induction motor or asynchronous motor is an AC motor with nominal power 7.5 hp/5.5kW, voltage 380V 50Hz, 2-pole number, squirrel-cage type , rated speed 2900rpm and TEFC enclosure. Cheap 3 phase induction motor has optimum structure, attractive appearance, low noise, simple operation, and high protection class.
SKU: ATO-IM-55002P
Free Shipping
Delivery date: 6-12 days

With its own advantages of rugged construction, high efficiency, reliable performance and favorable price, 7.5 hp (5.5kW) 3-phase 2-pole induction motor or asynchronous motor can be widely used in various kinds of general purpose machineries like fans, pumps, compressors, machine tools, transportation and so on.

7.5hp Induction Motor Specification

BasicsModelATO-Y2-132S1-2
Design StandardIEC
Weight58kg
Frame Type132S
MountingHorizontal Foot Mounting (B3)
Wiring MethodOutput≤4hp (3kW), Y connection
Output≥5.5hp (4kW), Delta connection
Degree of protectionIP54/IP55
Insulation ClassClass F
CoolingTEFC (compliance to IC 411 code of IEC 60034-6)
Technical ParametersNominal Output7.5hp or 5.5kW
Pole Number2-pole
Nominal Speed2900rpm
Frequency50Hz
Nominal Voltage380V
Nominal Current (full load)11.1A
Efficiency85.7%
Power Factor( cosφ)0.88
Nominal Torque (Tn)18.1Nm
Locked Rotor Torque/Nominal Torque (TST/Tn)2.2
Maximum Torque/Nominal Torque (Tmax/Tn)2.3
Locked Rotor Current/Nominal Current (IST/In)7.5
Noise Level80dB/(A)
EnvironmentAmbient Temperature-15℃+40℃
AltitudeLess than 1000m above sea level

Three-phase Induction Motor Dimensions
Three-phase AC induction motor dimensions

Frame TypeMounting Dimensions (mm)Overall Dimensions
AA/2BCDEFGHKABACADHDL
132S216108140893880103313212270275210345470

Wiring Diagrams (Three-phase squirrel-cage induction motor)
3 phase induction motor wiring connection diagram

Details

5500W AC Induction Motor Details

Tips: Three-phase induction motor’s starting mode
1. Direct starting
This kind of starting mode is the most basic and simplest in the motor starting. First, the knife switch is used to connect the motor to the power grid and the motor starts to run under the rated voltage, which is characterized by less investment, simple equipment and small quantity. Although the starting time is short, the torque is smaller at starting and the current is large, which is suitable for starting small capacity motors.
2. Reduced-voltage starting
The reduced-voltage starting method can be introduced into medium and large size asynchronous motors to restraint the starting current. When the motor finishes the starting, it will resume to full pressure working. However, the result of reduced-voltage starting will lower down the starting torque. Therefore, the reduced-voltage starting is only suitable for starting the motor under no-load or lightly loaded condition.
3. Soft starting
Soft starter is a new type control device whose main advantages include soft starting, light load and energy saving, and quickness. One of the most important features is that the electronic circuit is conducted in the silicon controlled rectifier of motor under the tandem connection of power supply. When starting in this way, the torque of motor will gradually increase with enhancive speed.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
The use of induction motors
5
Leeh
Avatar
1/25/2022 1:41 AM
Can I use your planetary gearbox on a 10KW 3ph 415 V induction motor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our planetary gearboxes can be used on induction motors.
Can you send me some information about these motors/ controllers?
5
lailli
Avatar
6/16/2023 1:54 AM
We are designing some tools for the offshore installation of windmills.
For one of these tools I am looking for a HPU with two motors of each 5kW. The HPU needs to be battery powered. So I am looking for a system of e.g. 48V.
The ambient temperature where the system needs to work is from -10 to 45 ℃ degrees since this is a salt laden environment. I am thinking to place these motors inside a box, but that box will be placed outside naturally.
When the system is in operation, it is possible to put some coolers on the box. But when the system is off, it will need to survive the environmental temperatures.
I’ve found your motors on the internet.
Can they be used in such an environment and what would be the radiated energy from the motor and controller?
Can you send me some information about these motors/ controllers?
Was this review helpful? Yes No (0/0)
ATO Responded
We also need to know: what are the required motor parameters?
What is the voltage?
What is the speed?
With brakes and a gearbox?
How much torque is needed?
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

With its own advantages of rugged construction, high efficiency, reliable performance and favorable price, 7.5 hp (5.5kW) 3-phase 2-pole induction motor or asynchronous motor can be widely used in various kinds of general purpose machineries like fans, pumps, compressors, machine tools, transportation and so on.

7.5hp Induction Motor Specification

BasicsModelATO-Y2-132S1-2
Design StandardIEC
Weight58kg
Frame Type132S
MountingHorizontal Foot Mounting (B3)
Wiring MethodOutput≤4hp (3kW), Y connection
Output≥5.5hp (4kW), Delta connection
Degree of protectionIP54/IP55
Insulation ClassClass F
CoolingTEFC (compliance to IC 411 code of IEC 60034-6)
Technical ParametersNominal Output7.5hp or 5.5kW
Pole Number2-pole
Nominal Speed2900rpm
Frequency50Hz
Nominal Voltage380V
Nominal Current (full load)11.1A
Efficiency85.7%
Power Factor( cosφ)0.88
Nominal Torque (Tn)18.1Nm
Locked Rotor Torque/Nominal Torque (TST/Tn)2.2
Maximum Torque/Nominal Torque (Tmax/Tn)2.3
Locked Rotor Current/Nominal Current (IST/In)7.5
Noise Level80dB/(A)
EnvironmentAmbient Temperature-15℃+40℃
AltitudeLess than 1000m above sea level

Three-phase Induction Motor Dimensions
Three-phase AC induction motor dimensions

Frame TypeMounting Dimensions (mm)Overall Dimensions
AA/2BCDEFGHKABACADHDL
132S216108140893880103313212270275210345470

Wiring Diagrams (Three-phase squirrel-cage induction motor)
3 phase induction motor wiring connection diagram

Details

5500W AC Induction Motor Details

Tips: Three-phase induction motor’s starting mode
1. Direct starting
This kind of starting mode is the most basic and simplest in the motor starting. First, the knife switch is used to connect the motor to the power grid and the motor starts to run under the rated voltage, which is characterized by less investment, simple equipment and small quantity. Although the starting time is short, the torque is smaller at starting and the current is large, which is suitable for starting small capacity motors.
2. Reduced-voltage starting
The reduced-voltage starting method can be introduced into medium and large size asynchronous motors to restraint the starting current. When the motor finishes the starting, it will resume to full pressure working. However, the result of reduced-voltage starting will lower down the starting torque. Therefore, the reduced-voltage starting is only suitable for starting the motor under no-load or lightly loaded condition.
3. Soft starting
Soft starter is a new type control device whose main advantages include soft starting, light load and energy saving, and quickness. One of the most important features is that the electronic circuit is conducted in the silicon controlled rectifier of motor under the tandem connection of power supply. When starting in this way, the torque of motor will gradually increase with enhancive speed.

Product reviews
The use of induction motors
5
Leeh
Avatar
1/25/2022 1:41 AM
Can I use your planetary gearbox on a 10KW 3ph 415 V induction motor?
Was this review helpful? Yes No (0/0)
ATO Responded
Yes, our planetary gearboxes can be used on induction motors.
Can you send me some information about these motors/ controllers?
5
lailli
Avatar
6/16/2023 1:54 AM
We are designing some tools for the offshore installation of windmills.
For one of these tools I am looking for a HPU with two motors of each 5kW. The HPU needs to be battery powered. So I am looking for a system of e.g. 48V.
The ambient temperature where the system needs to work is from -10 to 45 ℃ degrees since this is a salt laden environment. I am thinking to place these motors inside a box, but that box will be placed outside naturally.
When the system is in operation, it is possible to put some coolers on the box. But when the system is off, it will need to survive the environmental temperatures.
I’ve found your motors on the internet.
Can they be used in such an environment and what would be the radiated energy from the motor and controller?
Can you send me some information about these motors/ controllers?
Was this review helpful? Yes No (0/0)
ATO Responded
We also need to know: what are the required motor parameters?
What is the voltage?
What is the speed?
With brakes and a gearbox?
How much torque is needed?
Only registered users can write reviews