63 Amps Isolator Switch, 3 Pole/ 4 Pole

$73.89
Inexpensive 63 Amps load disconnect switch for sale, 3 pole or 4 pole can be selected. It is an isolator switch with long life and high efficiency, manufacturer direct sale.
SKU: ATO-IS-HGL63A
*
*
Free Shipping
Delivery date: 6-12 days

This is a high performance load isolator disconnect switch, its motor power at 25kW when used at 380V, and 22kW when used at 660V. With 63 Amps, widely used in various sites with 3 Pole/ 4 Pole.

63 Amps Isolator Switch Specifications

BasicsModelATOHGL-63A
Pole3 Pole/4 Pole
Weight3 Pole0.4kg
Technical Parameters4 Pole0.42kg
Rated current63A
Rated insulation voltage Ui690V
Dielectric strength1890V
Rated surge-resistant voltage Uimp kV(installed category IV)8
Rated Working current le380VAC-21B63A
AC-22B63A
AC-23B63A
Motor power P(380V)kW380V25 kW
660V22 kW
Rated short-time withstand current lcw (kA rms) 1.0s2
Rated breaking capability Icn (Arms) AC23 380VA504
Rated making capacity Icm(Arms) AC23 380V630
Rated short-current making capacity Icm'(Kapeak value)2.84
Mechanical durability (number of cyclic operation)1700
Electrical Curability 380V300
Electric durability Ue=660V, Rated currentCOSφ=0.95AC211700
COSφ=0.65AC22100
COSφ=0.35AC23500
Working EnvironmentMoment of operation1.2 Nm
Temperature-5℃~+55℃
Way of workingContinuously working
OperatingHandle
Installation formVertical
Altitude≤2000m
Pollution level3
Overvoltage levelⅢ
IP levelIP 20

Dimension

63A isolator switch dimension

63 Amps Load Isolator Disconnect Switch Operation Mode

63 amps load isolator disconnect switch
Details

63 Amps Isolator Switch Details

Tips: How to deal with the overheating of the contacts and contacts of the load isolating switch?

When the contacts and contacts of the isolation switch are found to be overheated, first report to the dispatch, try to reduce or transfer the load, strengthen the monitoring, and then deal with it according to the different wiring.
1. Double bus wiring. If a busbar side switch is overheated, pass the inverted busbar, remove the overheated isolating switch from operation, and power off for maintenance.
2. Single bus wiring. It is necessary to reduce its load, strengthen monitoring, and take measures to cool down, and if conditions permit, stop using it as much as possible.
3. The available bypass circuit breaker with a bypass circuit breaker can be switched.
4. If the line-side isolating switch is overheated, the treatment method is basically the same as that of the single busbar, and power outage maintenance should be arranged as soon as possible. During the maintenance period, the load should be reduced and monitoring should be strengthened.
5. One and a half circuit breaker connections can be operated in open loop.
6. For the overheated contacts and contacts of the bus-side isolating switch, after the isolating switch is opened, the on-site inspection can meet the safety distance of live working, and the bus-side down-conductor connector can be electrolyzed and then processed.

Load Break Switches Explained

In this video, we delve into the world of load break switches, mechanical devices capable of being operated while under load. We'll explore their functionality, applications in electrical systems, and provide a detailed breakdown of their features to equip you with a thorough comprehension of their advantages.

Different Types of Isolators and Their Uses

This video explains the popular types of switch isolators on the market and their potential applications in everyday and industrial use.

Product reviews
Work exactly as described
5
Henry
Avatar
3/28/2022 11:52 PM
It is a very solid switch, also very safe, easy to install and use. It work exactly as described! I will purchase more if you still supply.
Was this review helpful? Yes No (0/0)
Works well for our machine
5
Moriarty
Avatar
8/16/2026 7:46 PM
Bought this switch for a small industrial machine. The switch feels well made and the 63A rating works for our application. The operation is smooth, and so far we have had no problems with it.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

This is a high performance load isolator disconnect switch, its motor power at 25kW when used at 380V, and 22kW when used at 660V. With 63 Amps, widely used in various sites with 3 Pole/ 4 Pole.

63 Amps Isolator Switch Specifications

BasicsModelATOHGL-63A
Pole3 Pole/4 Pole
Weight3 Pole0.4kg
Technical Parameters4 Pole0.42kg
Rated current63A
Rated insulation voltage Ui690V
Dielectric strength1890V
Rated surge-resistant voltage Uimp kV(installed category IV)8
Rated Working current le380VAC-21B63A
AC-22B63A
AC-23B63A
Motor power P(380V)kW380V25 kW
660V22 kW
Rated short-time withstand current lcw (kA rms) 1.0s2
Rated breaking capability Icn (Arms) AC23 380VA504
Rated making capacity Icm(Arms) AC23 380V630
Rated short-current making capacity Icm'(Kapeak value)2.84
Mechanical durability (number of cyclic operation)1700
Electrical Curability 380V300
Electric durability Ue=660V, Rated currentCOSφ=0.95AC211700
COSφ=0.65AC22100
COSφ=0.35AC23500
Working EnvironmentMoment of operation1.2 Nm
Temperature-5℃~+55℃
Way of workingContinuously working
OperatingHandle
Installation formVertical
Altitude≤2000m
Pollution level3
Overvoltage levelⅢ
IP levelIP 20

Dimension

63A isolator switch dimension

63 Amps Load Isolator Disconnect Switch Operation Mode

63 amps load isolator disconnect switch
Details

63 Amps Isolator Switch Details

Tips: How to deal with the overheating of the contacts and contacts of the load isolating switch?

When the contacts and contacts of the isolation switch are found to be overheated, first report to the dispatch, try to reduce or transfer the load, strengthen the monitoring, and then deal with it according to the different wiring.
1. Double bus wiring. If a busbar side switch is overheated, pass the inverted busbar, remove the overheated isolating switch from operation, and power off for maintenance.
2. Single bus wiring. It is necessary to reduce its load, strengthen monitoring, and take measures to cool down, and if conditions permit, stop using it as much as possible.
3. The available bypass circuit breaker with a bypass circuit breaker can be switched.
4. If the line-side isolating switch is overheated, the treatment method is basically the same as that of the single busbar, and power outage maintenance should be arranged as soon as possible. During the maintenance period, the load should be reduced and monitoring should be strengthened.
5. One and a half circuit breaker connections can be operated in open loop.
6. For the overheated contacts and contacts of the bus-side isolating switch, after the isolating switch is opened, the on-site inspection can meet the safety distance of live working, and the bus-side down-conductor connector can be electrolyzed and then processed.

Product reviews
Work exactly as described
5
Henry
Avatar
3/28/2022 11:52 PM
It is a very solid switch, also very safe, easy to install and use. It work exactly as described! I will purchase more if you still supply.
Was this review helpful? Yes No (0/0)
Works well for our machine
5
Moriarty
Avatar
8/16/2026 7:46 PM
Bought this switch for a small industrial machine. The switch feels well made and the 63A rating works for our application. The operation is smooth, and so far we have had no problems with it.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews