50mm Magnetostrictive Displacement Measurement Sensor

$1,218.89
Aluminum alloy rail type magnetostrictive displacement sensor for measuring linear displacement, external installation, compact structure, easy to use, good security, suitable for CNC machinery worked in large vibration.
SKU: ATO-MSR-A0050
*
Free Shipping
Delivery date: 6-12 days

Magnetostrictive linear displacement sensor with measuring range 50mm has a aluminum alloy rail. Its electronic head parts are all built into aluminum alloy shell. Magnetostrictive displacement sensors are widely used in all kinds of CNC machinery that always working in large vibration.

Specification:

ModelATO-CTH-A-50
Measuring Range50mm
Output Signal0~5V/ 0~10V/ 0~20mA/ 4~20mA (Optional)
Linearity≤±0.05%FS
Repeatability≤±0.005%FS
ResolutionInfinite resolution (depending on controller AD and power supply ripple)
Hysteresis≤0.001%FS
Temperature Drift≤0.001%FS
Operating Voltage24VDC
Current Draw5~16mA
Vibration5g/10-2000Hz/IEC Standard IEC Standard 68-2-6
Temperature-40°C~+85°C
Load CharacteristicsVoltage output load resistance ≥3KΩ
Current output load resistance ≤1KΩ
Connection TypeSlide type or magnetic levitation type
Protection ClassIP65

Dimensional drawing (unit: mm):

Magnetostrictive sensor rail type dimensional drawing a
Installation diagram:

magnetostrictive sensor rail type installation drawing
Tips: What is magnetostrictive displacement sensor?
Magnetostrictive displacement sensor indicates a kind of displacement detecting device developed based on ferromagnetic material magnetostrictive effect. With special advantages such as high reliability, high resolution, non-contact measurement and oil & stain resistance, etc., it could be used for continuously, precisely and real-time detecting the displacement (position) and velocity of various moving parts under abominably industrial environment. As an important component to realize precise operation and control, it can substantially enhance the precision and efficiency of the whole system. It is applicable for detecting the stroke or position of mechanical device with rectilinear motion. Precision servo feedback control of hydraulic system is one of its most typical applications.

In this video, ATO will simply show you how to connect linear displacement sensor and digital panel meter.

In this video, ATO will show you top ten most used sensors (sensing technologies).

Product reviews
How many pins in the ATO-S-LVDT displacement sensor connector?
5
Mary
Avatar
1/13/2022 6:41 PM
How many pins in the ATO-S-LVDT displacement sensor connector?
Was this review helpful? Yes No (0/0)
ATO Responded
3 pins.
Very satisfied with this sensor
5
Lux
Avatar
7/28/2026 8:27 PM
I needed a displacement sensor for a small milling project, and this one fit the bill perfectly. It was easy to wire up and the 24V supply was already available on my machine. The feedback is clean and stable. Would buy again.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Magnetostrictive linear displacement sensor with measuring range 50mm has a aluminum alloy rail. Its electronic head parts are all built into aluminum alloy shell. Magnetostrictive displacement sensors are widely used in all kinds of CNC machinery that always working in large vibration.

Specification:

ModelATO-CTH-A-50
Measuring Range50mm
Output Signal0~5V/ 0~10V/ 0~20mA/ 4~20mA (Optional)
Linearity≤±0.05%FS
Repeatability≤±0.005%FS
ResolutionInfinite resolution (depending on controller AD and power supply ripple)
Hysteresis≤0.001%FS
Temperature Drift≤0.001%FS
Operating Voltage24VDC
Current Draw5~16mA
Vibration5g/10-2000Hz/IEC Standard IEC Standard 68-2-6
Temperature-40°C~+85°C
Load CharacteristicsVoltage output load resistance ≥3KΩ
Current output load resistance ≤1KΩ
Connection TypeSlide type or magnetic levitation type
Protection ClassIP65

Dimensional drawing (unit: mm):

Magnetostrictive sensor rail type dimensional drawing a
Installation diagram:

magnetostrictive sensor rail type installation drawing
Tips: What is magnetostrictive displacement sensor?
Magnetostrictive displacement sensor indicates a kind of displacement detecting device developed based on ferromagnetic material magnetostrictive effect. With special advantages such as high reliability, high resolution, non-contact measurement and oil & stain resistance, etc., it could be used for continuously, precisely and real-time detecting the displacement (position) and velocity of various moving parts under abominably industrial environment. As an important component to realize precise operation and control, it can substantially enhance the precision and efficiency of the whole system. It is applicable for detecting the stroke or position of mechanical device with rectilinear motion. Precision servo feedback control of hydraulic system is one of its most typical applications.

Product reviews
How many pins in the ATO-S-LVDT displacement sensor connector?
5
Mary
Avatar
1/13/2022 6:41 PM
How many pins in the ATO-S-LVDT displacement sensor connector?
Was this review helpful? Yes No (0/0)
ATO Responded
3 pins.
Very satisfied with this sensor
5
Lux
Avatar
7/28/2026 8:27 PM
I needed a displacement sensor for a small milling project, and this one fit the bill perfectly. It was easy to wire up and the 24V supply was already available on my machine. The feedback is clean and stable. Would buy again.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews