500mm Magnetostrictive Linear Displacement Sensor for rapid transit railway

$949.86
Split type magnetostrictive displacement sensor, high pressure resistant, strong anti-interference ability, non-contact measurement, small installation size, built-in hydraulic cylinder piston, easy to replacement and intelligent diagnosis.
SKU: ATO-MSD-SA0500
Free Shipping
Delivery date: 6-12 days

Magnetostrictive sensor has separated electronic bin and sensitive head. The two parts are connected by a cable to save installation space. It is suitable for built-in measurement applications where the installation requirement of the electronic bin is strict. It is applied to rapid transit railway and other fields requiring high performance.

Specification:

BasicsModelATO-MSD-SA0500
Measuring range0~500 mm
Shipping weight3 kg
Length595mm
Technical parametersLinearity≤0.05%FS
Repeatability≤0. 002%FS
Working Voltage24VDC
Working current≤30mA
Output method0-5V / 0-10v / 4-20mA
TemperatureMeasuring rod: - 40℃~+110℃; Electronic bin: - 40℃~+80℃
Measuring rod material0Cr18Ni9 (304) or 316L stainless steel (special custom-made)
Type of lead wirePG7 connection; Aviation plug
Protection ClassElectronic bin: IP67; Measuring rod: IP69
Installation methodElectronic bin: 4*M6X45; Measuring rod: M18X1.5
effective travel in this series (customizable)50-5000mm

Installation diagram (unit: mm):
split type magnetostrictive sensor dimension diagram

Tips: Core component of magnetostrictive sensor
The core component of magnetostrictive displacement sensor, located in a measuring element (waveguide tube), indicates a piece of waveguide wire made of special magnetostrictive material . This material is well-known as "black gold" in the modern industry, featuring high strain value, electrical (magnetic) mechanical wave conversion ability. It can be used to change tiny magnetic field into mechanical wave.

In this video, ATO will simply show you how to connect linear displacement sensor and digital panel meter.

Product reviews
Reliable magnetostrictive displacement sensor
5
Yori
Avatar
10/19/2026 7:32 PM
We use this 500mm magnetostrictive sensor to monitor piston movement in a hydraulic system. The readings have been consistent during our initial tests, and the 4–20mA output works with our existing controller. The sensor has performed as expected so far.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Magnetostrictive sensor has separated electronic bin and sensitive head. The two parts are connected by a cable to save installation space. It is suitable for built-in measurement applications where the installation requirement of the electronic bin is strict. It is applied to rapid transit railway and other fields requiring high performance.

Specification:

BasicsModelATO-MSD-SA0500
Measuring range0~500 mm
Shipping weight3 kg
Length595mm
Technical parametersLinearity≤0.05%FS
Repeatability≤0. 002%FS
Working Voltage24VDC
Working current≤30mA
Output method0-5V / 0-10v / 4-20mA
TemperatureMeasuring rod: - 40℃~+110℃; Electronic bin: - 40℃~+80℃
Measuring rod material0Cr18Ni9 (304) or 316L stainless steel (special custom-made)
Type of lead wirePG7 connection; Aviation plug
Protection ClassElectronic bin: IP67; Measuring rod: IP69
Installation methodElectronic bin: 4*M6X45; Measuring rod: M18X1.5
effective travel in this series (customizable)50-5000mm

Installation diagram (unit: mm):
split type magnetostrictive sensor dimension diagram

Tips: Core component of magnetostrictive sensor
The core component of magnetostrictive displacement sensor, located in a measuring element (waveguide tube), indicates a piece of waveguide wire made of special magnetostrictive material . This material is well-known as "black gold" in the modern industry, featuring high strain value, electrical (magnetic) mechanical wave conversion ability. It can be used to change tiny magnetic field into mechanical wave.

Product reviews
Reliable magnetostrictive displacement sensor
5
Yori
Avatar
10/19/2026 7:32 PM
We use this 500mm magnetostrictive sensor to monitor piston movement in a hydraulic system. The readings have been consistent during our initial tests, and the 4–20mA output works with our existing controller. The sensor has performed as expected so far.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews