300mm Linear Displacement Sensor for blow molding machine

$929.86
Magnetostrictive linear displacement sensor for blow molding machine, high precision, no temperature drift, anti-jamming performance, long life, high temperature resistance, corrosion resistance, high pressure resistant.
SKU: ATO-MSD-0300
*
*
*
*
Free Shipping
Delivery date: 6-12 days

Magnetostrictive displacement sensor with measuring range 300mm is used for the liquid level preset and feedback, such as the liquid level of blow molding machine hydro-cylinder. Magnetostrictive sensors also can be used in most industrial automation systems.

Specification:

BasicsModelATO-MSD-0300
Measuring range0~300 mm
Shipping weight2 kg
Length499.3 mm
Diameter51 mm
Technical parametersLinearity≤0.05%FS
Repeatability≤0.005%FS
Resolution ratio≤0.001%FS
Hysteresis≤0.001%FS
Working Voltage24VDC
Working currentVoltage output /digital output type≤16mA; Current output type≤35mA
Protection type *Normal type, Explosion-proof type, Anti-corrosion type
Output signal *0~5V, 0~10V, 4~20mA, RS485, SSI gray code signal
Measuring rod material0Cr18Ni9 (304), or 316L stainless steel (customized)
Measuring rod diameterФ10mm
Electronic bin material1Cr18Ni9 (304)
304 and PTFE casing outside (Anti-corrosion type, customized)
1Cr18Ni9Ti and protection cover outside (Anti-corrosion type, customized)
Connecting screw thread *M18×1.5, M20×1.5, 3/4-16UNF
Electrical connection *PVC shielded cable, circular connector (not applicable to explosion-proof type)
Measuring rod pressure40MPa, 70MPa (Explosion-proof type)
TemperatureT1: 0~+ 70℃, T2: -25~+80℃, T3: -40~+120℃
Buffer areaFront-end of buffer 50.8mm (electronic bin), the end of the buffer 63.5mm (the buffer area can be custom-made)
Vibration100g, IEC standards 68-2-715g/ 10-2000Hz, IEC standards 68-2-6
Protection ClassIP67
Explosion-proof levelExplosion-proof type: EXd II BT5

Installation diagram (unit: mm):
1. PG7 connection
magnetostrictive sensor with PG7 connection
2. Explosion-proof connection
magnetostrictive sensor with explosion-proof connection
3. External installation
magnetostrictive sensor external installation
Tips: Parallelism and angle of magnetostrictive sensor
When installing the magnetostrictive linear displacement sensor, the centering should be very good. However, the error of ±0.5mm is allowed for the parallelism while that of ±12° is allowed for the angle. In case of large error of parallelism and angle, the display values will fluctuate. Then, the parallelism and angle should be adjusted.

In this video, ATO will simply show you how to connect linear displacement sensor and digital panel meter.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Magnetostrictive displacement sensor with measuring range 300mm is used for the liquid level preset and feedback, such as the liquid level of blow molding machine hydro-cylinder. Magnetostrictive sensors also can be used in most industrial automation systems.

Specification:

BasicsModelATO-MSD-0300
Measuring range0~300 mm
Shipping weight2 kg
Length499.3 mm
Diameter51 mm
Technical parametersLinearity≤0.05%FS
Repeatability≤0.005%FS
Resolution ratio≤0.001%FS
Hysteresis≤0.001%FS
Working Voltage24VDC
Working currentVoltage output /digital output type≤16mA; Current output type≤35mA
Protection type *Normal type, Explosion-proof type, Anti-corrosion type
Output signal *0~5V, 0~10V, 4~20mA, RS485, SSI gray code signal
Measuring rod material0Cr18Ni9 (304), or 316L stainless steel (customized)
Measuring rod diameterФ10mm
Electronic bin material1Cr18Ni9 (304)
304 and PTFE casing outside (Anti-corrosion type, customized)
1Cr18Ni9Ti and protection cover outside (Anti-corrosion type, customized)
Connecting screw thread *M18×1.5, M20×1.5, 3/4-16UNF
Electrical connection *PVC shielded cable, circular connector (not applicable to explosion-proof type)
Measuring rod pressure40MPa, 70MPa (Explosion-proof type)
TemperatureT1: 0~+ 70℃, T2: -25~+80℃, T3: -40~+120℃
Buffer areaFront-end of buffer 50.8mm (electronic bin), the end of the buffer 63.5mm (the buffer area can be custom-made)
Vibration100g, IEC standards 68-2-715g/ 10-2000Hz, IEC standards 68-2-6
Protection ClassIP67
Explosion-proof levelExplosion-proof type: EXd II BT5

Installation diagram (unit: mm):
1. PG7 connection
magnetostrictive sensor with PG7 connection
2. Explosion-proof connection
magnetostrictive sensor with explosion-proof connection
3. External installation
magnetostrictive sensor external installation
Tips: Parallelism and angle of magnetostrictive sensor
When installing the magnetostrictive linear displacement sensor, the centering should be very good. However, the error of ±0.5mm is allowed for the parallelism while that of ±12° is allowed for the angle. In case of large error of parallelism and angle, the display values will fluctuate. Then, the parallelism and angle should be adjusted.

Only registered users can write reviews