Features
- Excellent magnetic core enameled wire, high temperature resistance
- 1000W switching power supply with high voltage resistance, low loss, high capacity
- Iron-silicon aluminum magnetic ring, lower working temperature
- Highly efficient heat dissipation, low fan noise
- High working efficiency, stable output
- Exquisite appearance, small size, stable performance
Specification
| Model | ATO-MS-1000-48 | |
| Output | DC Voltage | 48V |
| Rated Current | 20.8A | |
| Rated Power | 1000W | |
| Ripple & Noise | <150mVp-p | |
| Voltage Accuracy | ±1% | |
| Voltage Adjustment Range | ±10% | |
| Load Adjustment Rate | <±0.5% | |
| Line Adjustment Rate | <±0.5% | |
| Input | Voltage Range | 180~264VAC; 254~370VDC |
| Frequency Range | 47~63Hz | |
| Efficiency (Typ.) | >85% | |
| AC Current | 220VAC, 8A | |
| Inrush Current | 60A 230VAC | |
| Setup, Rise, Holdup Time | 200ms, 50ms, 20ms: 230V AC | |
| Protection | Overload | 105~135% rated output power Protection type: Constant current limiting, recovers automatically after fault condition is removed. |
| Over temperature | RTH3: Fan is always running, ≥90°C output shut down. | |
| Environment | Working Temperature | -10 ~ +50℃ |
| Working Humidity | 20~90% RH | |
| Storage Temperature | -20~+85℃ | |
| Storage Humidity | 10~95% RH | |
| Safety & EMC | Withstand Voltage | I/P-O/P: 1.5KVAC I/P-FG: 1.5KVAC O/P-FG: 0.5KVAC |
| Leakage Current | I/P-O/P, <6mA at 1.5kVAC; <1.5mA at 220VAC | |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100M Ohms/500VDC | |
| Others | Dimension | 240*124*65mm (L*W*H) |
| Weight | 2.4kg | |
Dimensions (Unit: mm)



Tips: What should I do if the switching power supply makes noise?
- Add filter
Adding a filter is a very common way to suppress switching power supply noise. If the power supply is disturbed by external disturbances such as lightning strike and artificial noise, the malfunction will cause great disturbance to the system. If a filter is connected to the AC input, the generation of this disturbance can be effectively reduced, and the disturbance can be reduced in time. The noise that occurs inside the switching power supply does not leak out from the input. - Grounding measures
The purpose of grounding the power supply is for safety reasons, and the electromagnetic compatibility problem can be effectively solved after the grounding of the power supply. Reducing Electromagnetic Disturbance. A good grounding system plays a vital role. - Other measures
In addition to the above measures to effectively suppress the noise of the power supply, we can also start to reduce the noise impact of the switching power supply in terms of the position and direction of component installation, the overall configuration of the system circuit, etc.
To sum up, the noise of switching power supply is affected by many factors. In order to effectively suppress the noise of switching power supply, the relevant staff should pay attention to the analysis of noise of switching power supply, fully grasp the overall situation of the switching power supply, carry out effective management, promote the upgrading of the switching power supply, and improve the use function of the switching power supply.
Only registered users can write reviews
Customers who bought this item also bought
1 hp (750W) Brushless DC Motor, 24V/48V/72V, 2.4 Nm
ATO-BLDC-750R3
$352.77
1 hp (750W) brushless DC electric motor with reasonable price, 3 phase 4 pair of poles design, 3000 rpm rated speed, 2.3 Nm holding torque, works at 24V/48V DC power supply. Buy BLDC motor controller and gearbox combines with the BLDC motor will provide you higher torque.
24V-60V Brushless DC Motor Controller for 24/36/48/60V BLDC Motor
ATO-BLDC-C100
$473.06
Low cost BLDC motor controller works at 24V to 60V power supply to control speed for 24/36/48/60V 3 phase BLDC motor. Rated current 75A, 50 rpm in hall sensor motor and 1 rpm in encoder sensor. This brushless electric motor driver should be installed in a well-ventilated environment.