35 kg·cm (3.5 Nm) RC Servo Motor, 6V/ 7.4V

$179.99
35 kg·cm (3.5 Nm) torque RC servo motor is a small digital radio control servo motor with high precision non-contact magnetic encoder position sensor and double ball bearings. Selectable 6V or 7.4V operating voltage, waterproof grade IP54. This remote control servo is used for RC cars, model planes, submarines, remote-controlled robots, etc.
SKU: ATO-SERVO-RC35
*
Free Shipping
Delivery date: 8-12 days

35 kg·cm RC radio control servo motor is a compact digital servo featuring a high-precision non-contact magnetic encoder for position sensing and double ball bearings for smooth operation. This remote control servo is commonly used for RC cars, model airplanes, submarines, and remote-controlled robots, due to its ability to offer precise steering, positioning, and actuation in dynamic environments.

Specification

ModelATO-FT5835M
Electrical SpecificationOperating Voltage6V7.4V
No Load Speed0.238sec/60°0.192sec/60°
Running Current (No Load)100mA290mA
Stall Torque (at Locked)28.8 kg·cm (2.8 Nm)35.5 kg·cm (3.5 Nm)
Stall Current (at Locked)3.2A3.9A
Idle Current (at Stopped)6mA6mA
Input Voltage4V-8.4V
Rated Torque9.5kg·cm11.8kg·cm
Rated Current1A1.2A
Mechanical SpecificationSize40*20*43mm
Limit AngleNo Limit
Case MaterialPA + Aluminum
Gear MaterialSteel Gear
Bearing TypeBall Bearing
Angle SensorTypeCarbon-Film Potentiometer
Angle220°
Life1000000 Cycles Min
Connector & CableTypeJR
MaterialPVC
Length30cm
Pin Definition1: Signal; 2: Vcc; 3. GND
Weight74g
Horn Type25T/ 5.9mm
Gear Ratio1/356
Back Lash≤0.5°
Rocker Phantom0°
Rocker ScrewM3*6
MotorCore Motor
Storage Temperature Range-30℃ ~ 80℃
Operating Temperature Range-20℃ ~ 60℃
Temperature Range25℃ ± 5 ℃
Humidity Range65% ± 10%
CertificateEMC, ROHS
Control SpecificationCommand SignalPulse Width Modification (PWM)
Control System TypeDigital Comparator
Operating Travel180° (at 500 to 2500 μsec)
Left & Right Travelling Angle deviation≤5°
Centering Deviation≤1°
Neutral Position1500 μsec
Dead Band Width≤4 μsec
Rotating DirectionCounterclockwise (at 1500 to 2000 μsec)
Pulse Width Range500 to 2500 μsec
Electronic ProtectionStall 8 sec
Temperature Protection>70℃
Reliability TestingLife Test>100000 Times
Motor Noises45 ± 5dB
Servo Noises60 ± 5dB
Waterproof PerformanceIP54


Dimensions (Unit: mm)

Dimensions of 35 kg.cm RC Servo Motor

Waterproof details

  • A waterproof rubber ring is added to the connection of the radio control servo motor.
  • The circuit board of the RC servo motor is waterproofed with three-proof paint.
  • The remote control servo motor is sealed.
  • The potentiometer is sealed.

Details

35KG RC Servo Motors Details

Tips: RC servo motor working principle

The working principle of the micro radio control servo motor is that the control circuit receives the control signal from the signal source and drives the motor to rotate. The gear set multiplies and reduces the speed of the motor, and enlarges the output torque of the motor by the response multiple, and then outputs. The potentiometer and the final stage of the gear set rotate together to measure the rotation angle of the steering gear shaft. The circuit board detects and judges the rotation angle of the steering gear according to the potentiometer, and then controls the radio control servo motor to rotate to the target angle or keep it at the target angle. Its working process is: control signal → control circuit board → motor rotation → gear set deceleration → steering wheel rotation → position feedback potentiometer → control circuit board feedback.

This video briefly shows the application of the ATO servo system in a linear slide.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Definitely recommend these RC servo.
5
Tommie
Avatar
3/28/2022 7:32 PM
I’ve brought multiple of these 3.5 Nm RC servo motors due to the quality and strength. Work perfect and have tons of torque. They are excellent performing cheap servos. I would highly recommend them to anyone.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

35 kg·cm RC radio control servo motor is a compact digital servo featuring a high-precision non-contact magnetic encoder for position sensing and double ball bearings for smooth operation. This remote control servo is commonly used for RC cars, model airplanes, submarines, and remote-controlled robots, due to its ability to offer precise steering, positioning, and actuation in dynamic environments.

Specification

ModelATO-FT5835M
Electrical SpecificationOperating Voltage6V7.4V
No Load Speed0.238sec/60°0.192sec/60°
Running Current (No Load)100mA290mA
Stall Torque (at Locked)28.8 kg·cm (2.8 Nm)35.5 kg·cm (3.5 Nm)
Stall Current (at Locked)3.2A3.9A
Idle Current (at Stopped)6mA6mA
Input Voltage4V-8.4V
Rated Torque9.5kg·cm11.8kg·cm
Rated Current1A1.2A
Mechanical SpecificationSize40*20*43mm
Limit AngleNo Limit
Case MaterialPA + Aluminum
Gear MaterialSteel Gear
Bearing TypeBall Bearing
Angle SensorTypeCarbon-Film Potentiometer
Angle220°
Life1000000 Cycles Min
Connector & CableTypeJR
MaterialPVC
Length30cm
Pin Definition1: Signal; 2: Vcc; 3. GND
Weight74g
Horn Type25T/ 5.9mm
Gear Ratio1/356
Back Lash≤0.5°
Rocker Phantom0°
Rocker ScrewM3*6
MotorCore Motor
Storage Temperature Range-30℃ ~ 80℃
Operating Temperature Range-20℃ ~ 60℃
Temperature Range25℃ ± 5 ℃
Humidity Range65% ± 10%
CertificateEMC, ROHS
Control SpecificationCommand SignalPulse Width Modification (PWM)
Control System TypeDigital Comparator
Operating Travel180° (at 500 to 2500 μsec)
Left & Right Travelling Angle deviation≤5°
Centering Deviation≤1°
Neutral Position1500 μsec
Dead Band Width≤4 μsec
Rotating DirectionCounterclockwise (at 1500 to 2000 μsec)
Pulse Width Range500 to 2500 μsec
Electronic ProtectionStall 8 sec
Temperature Protection>70℃
Reliability TestingLife Test>100000 Times
Motor Noises45 ± 5dB
Servo Noises60 ± 5dB
Waterproof PerformanceIP54


Dimensions (Unit: mm)

Dimensions of 35 kg.cm RC Servo Motor

Waterproof details

  • A waterproof rubber ring is added to the connection of the radio control servo motor.
  • The circuit board of the RC servo motor is waterproofed with three-proof paint.
  • The remote control servo motor is sealed.
  • The potentiometer is sealed.

Details

35KG RC Servo Motors Details

Tips: RC servo motor working principle

The working principle of the micro radio control servo motor is that the control circuit receives the control signal from the signal source and drives the motor to rotate. The gear set multiplies and reduces the speed of the motor, and enlarges the output torque of the motor by the response multiple, and then outputs. The potentiometer and the final stage of the gear set rotate together to measure the rotation angle of the steering gear shaft. The circuit board detects and judges the rotation angle of the steering gear according to the potentiometer, and then controls the radio control servo motor to rotate to the target angle or keep it at the target angle. Its working process is: control signal → control circuit board → motor rotation → gear set deceleration → steering wheel rotation → position feedback potentiometer → control circuit board feedback.

Product reviews
Definitely recommend these RC servo.
5
Tommie
Avatar
3/28/2022 7:32 PM
I’ve brought multiple of these 3.5 Nm RC servo motors due to the quality and strength. Work perfect and have tons of torque. They are excellent performing cheap servos. I would highly recommend them to anyone.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews