20 kg·cm (2 Nm) RC Servo Motor, 6V/ 7.4V

$78.98
Micro radio control (RC) servo motor, a full copper gear standard servo with 20 kg·cm (2 Nm) stall torque, 6V or 7.4V operating voltage available, compact size, and high torque. This digital remote control servo motor has an internal Hall Effect position sensor, excellent linearity, and precision control.
SKU: ATO-SERVO-RC20
*
Free Shipping
Delivery date: 6-12 days

Digital radio control (RC) servo motor adopts 12-bit high precision non-contact magnetic encoder position sensing, compact design with high torque, best for remote controlled cars, model planes, submarines, remote-controlled robots, etc.

Specification

ModelATO-FT5320M
Electrical SpecificationOperating Voltage6V7.4V
No Load Speed0.185sec/60° (54 rpm)0.151sec/60° (66 rpm)
Running Current (No Load)100mA120mA
Stall Torque (at Locked)16.5kg·cm20kg·cm
229.54oz. in278.23oz. in
Stall Current (at Locked)2.3A3A
Idle Current (at Stopped)6mA6mA
Input Voltage4V-8.4V
Rated Torque5.5kg·cm6.5kg·cm
Rated Current800mA1000mA
Mechanical SpecificationSize55*20*43mm
Limit AngleNo Limit
Case MaterialPA + Aluminum
Gear MaterialCopper Gear
Bearing TypeBall Bearings
Angle SensorTypeCarbon-Film Potentiometer
Angle220 °
Life1000000 Cycles Min
Connector & CableTypeJR
MaterialPVC
Length30cm
Pin Definition1: Signal; 2: Vcc; 3: GND
Weight67g ±1g
Horn Type25T/ 5.9mm
Gear Ratio1/275
Back Lash≤0.5°
Rocker Phantom0°
Rocker ScrewM3*6
MotorCore Motor
Storage Temperature Range-30℃ ~ 80℃
Operating Temperature Range-20℃ ~ 60℃
Temperature Range25℃ ± 5 ℃
Humidity Range65% ± 10%
CertificateEMC, ROHS
Control SpecificationCommand SignalPulse Width Modification
Control System TypeDigital Comparator
Operating Travel180° (at 500 to 2500 μsec)
Left & Right Travelling Angle deviation≤5°
Centering Deviation≤1°
Neutral Position1500 μsec
Dead Band Width≤4 μsec
Rotating DirectionCounterclockwise (at 1500 to 2000 μsec)
Pulse Width Range500 to 2500 μsec
Electronic ProtectionStall 8 sec
Temperature Protection>70℃
Reliability TestingLife Test>100000 Times
Motor Noises45 ± 5dB
Servo Noises60 ± 5dB
Waterproof PerformanceIP54


Dimensions (Unit: mm)

Dimensions of 20kg.cm Micro RC Servo Motor

Waterproof details

  • A waterproof rubber ring is added to the connection of the radio control servo motor.
  • The circuit board of the RC servo motor is waterproofed with three-proof paint.
  • The remote control servo motor is sealed.
  • The potentiometer is sealed.

Details

20KG RC Servo Motors Details

Tips: What is a micro RC servo motor?

RC micro servo motor refers to the motor that controls the operation of mechanical components in the servo system and is an auxiliary motor indirect speed change device. Digital radio control servo motors can control the speed and position very accurately and can convert the voltage signal into torque and speed to drive the control object. The rotor speed of the remote control servo motor is controlled by the input signal and can react quickly. In the automatic control system, it is used as an actuator and has the characteristics of small electromechanical time constant, high linearity, and starting voltage. It can control the received electrical signal Converted into angular displacement or angular velocity output on the motor shaft. Divided into two major categories of DC and AC servo motors, its main feature is that there is no rotation when the signal voltage is zero, and the speed decreases at a uniform speed as the torque increases.

This video briefly shows the application of the ATO servo system in a linear slide.

VFD Two-Wire Control Wiring with Push Button for Forward Motor

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
I like everything about this servo motor
5
Jackson
Avatar
3/15/2022 1:47 AM
Excellent servo motor for the price and the servo motor is suitable for my equips. Everything is perfect. This shopping gives me a wonderful expereince and it is worth to try. You won't be regret.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Digital radio control (RC) servo motor adopts 12-bit high precision non-contact magnetic encoder position sensing, compact design with high torque, best for remote controlled cars, model planes, submarines, remote-controlled robots, etc.

Specification

ModelATO-FT5320M
Electrical SpecificationOperating Voltage6V7.4V
No Load Speed0.185sec/60° (54 rpm)0.151sec/60° (66 rpm)
Running Current (No Load)100mA120mA
Stall Torque (at Locked)16.5kg·cm20kg·cm
229.54oz. in278.23oz. in
Stall Current (at Locked)2.3A3A
Idle Current (at Stopped)6mA6mA
Input Voltage4V-8.4V
Rated Torque5.5kg·cm6.5kg·cm
Rated Current800mA1000mA
Mechanical SpecificationSize55*20*43mm
Limit AngleNo Limit
Case MaterialPA + Aluminum
Gear MaterialCopper Gear
Bearing TypeBall Bearings
Angle SensorTypeCarbon-Film Potentiometer
Angle220 °
Life1000000 Cycles Min
Connector & CableTypeJR
MaterialPVC
Length30cm
Pin Definition1: Signal; 2: Vcc; 3: GND
Weight67g ±1g
Horn Type25T/ 5.9mm
Gear Ratio1/275
Back Lash≤0.5°
Rocker Phantom0°
Rocker ScrewM3*6
MotorCore Motor
Storage Temperature Range-30℃ ~ 80℃
Operating Temperature Range-20℃ ~ 60℃
Temperature Range25℃ ± 5 ℃
Humidity Range65% ± 10%
CertificateEMC, ROHS
Control SpecificationCommand SignalPulse Width Modification
Control System TypeDigital Comparator
Operating Travel180° (at 500 to 2500 μsec)
Left & Right Travelling Angle deviation≤5°
Centering Deviation≤1°
Neutral Position1500 μsec
Dead Band Width≤4 μsec
Rotating DirectionCounterclockwise (at 1500 to 2000 μsec)
Pulse Width Range500 to 2500 μsec
Electronic ProtectionStall 8 sec
Temperature Protection>70℃
Reliability TestingLife Test>100000 Times
Motor Noises45 ± 5dB
Servo Noises60 ± 5dB
Waterproof PerformanceIP54


Dimensions (Unit: mm)

Dimensions of 20kg.cm Micro RC Servo Motor

Waterproof details

  • A waterproof rubber ring is added to the connection of the radio control servo motor.
  • The circuit board of the RC servo motor is waterproofed with three-proof paint.
  • The remote control servo motor is sealed.
  • The potentiometer is sealed.

Details

20KG RC Servo Motors Details

Tips: What is a micro RC servo motor?

RC micro servo motor refers to the motor that controls the operation of mechanical components in the servo system and is an auxiliary motor indirect speed change device. Digital radio control servo motors can control the speed and position very accurately and can convert the voltage signal into torque and speed to drive the control object. The rotor speed of the remote control servo motor is controlled by the input signal and can react quickly. In the automatic control system, it is used as an actuator and has the characteristics of small electromechanical time constant, high linearity, and starting voltage. It can control the received electrical signal Converted into angular displacement or angular velocity output on the motor shaft. Divided into two major categories of DC and AC servo motors, its main feature is that there is no rotation when the signal voltage is zero, and the speed decreases at a uniform speed as the torque increases.

Product reviews
I like everything about this servo motor
5
Jackson
Avatar
3/15/2022 1:47 AM
Excellent servo motor for the price and the servo motor is suitable for my equips. Everything is perfect. This shopping gives me a wonderful expereince and it is worth to try. You won't be regret.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews