3 Position DIP Switch, 6 Pin, SPST

$9.09
Factory price 3 position 6 pin DIP switch oneline sale, SPST loop, mini and simple. This electronic DIP switch consists of 3 switches in a single unit which can be mounted on a PCB, breadboard or motherboard to control circuits.
SKU: ATO-DIP-3P
*
This product has a minimum quantity of 10
Free Shipping
Delivery date: 6-12 days

Wholesale price 3 position 3 way electronic DIP switch is a dual in-line package switch that can be mounted directly on a circuit board to activate or deactivate different electronic circuits.

Specification

ModelATO-DIP-3P
Spacing2.54mm
Number of Switch3
Number of Pin6
Maximum Operating Force8N
Push Button Stroke2mm
Operating Temperature-20℃~+70℃
Storage Temperature-40℃~+85℃
Contact ResistanceInitial Value: 50MΩ, After Test: 100MΩ
Insulation Resistance100MΩ, 500VDC
Compressive Strength500VAC/1min
Interpolar Capacitance5pF
LoopSPST (Single Pole Single Throw)
Electrical LifeTested under voltage 24V DC and current 25mA, it can be dialed back and forth about 2000 times
Rated CurrentDoes not Switch Frequently10mA, Withstand Voltage 50V DC
Switch Frequently25mA, Withstand Voltage 24V DC
Weight0.1kg

Dimensions (Unit: mm)

Dimensions of 3 Position 6 Pin SPST DIP Switch

Tips: How to use the DIP switch?

The DIP switch cannot directly control the stepper motor, it needs a stepper driver. The principle of the DIP switch is like the parallel connection of resistors. The number 8421 corresponds to the resistance value of 1/8, 1/4, 1/2, 1 in turn, which can also be measured with a multimeter. The DIP switch is equivalent to a switch value. When it is turned ON, it means it is connected, and when it is OFF it means it is disconnected. In digital circuits, 0 and 1 are usually used for binary output.

Miniature DIP switches are available with 1 to 12 positions plus corresponding numbers of pins for selection. They are equipped with SPST loop and allow users to control the flow of electricity around a PCB. Red and blue types are available.

Proposition 65 Warning

*WARNING: This product can expose you to chemicals, including lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Product reviews
Very useful DIP switch
5
Sapello
Avatar
5/30/2022 1:21 AM
These 3 position DIP switches are a good quality unit. For my use, I put these switches into breadboard friendly DIP sockets. They're fine for use on solder-type protoboard.
Was this review helpful? Yes No (0/0)
Just what I needed.
5
Annette
Avatar
6/27/2022 11:59 PM
I ordered these DIP switches because I think they are a great value. These DIP switches are solid construction and compact size. Switch action is firm and has a soft tactile impulse when the switch is opened and closed. I am very happy with them.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Wholesale price 3 position 3 way electronic DIP switch is a dual in-line package switch that can be mounted directly on a circuit board to activate or deactivate different electronic circuits.

Specification

ModelATO-DIP-3P
Spacing2.54mm
Number of Switch3
Number of Pin6
Maximum Operating Force8N
Push Button Stroke2mm
Operating Temperature-20℃~+70℃
Storage Temperature-40℃~+85℃
Contact ResistanceInitial Value: 50MΩ, After Test: 100MΩ
Insulation Resistance100MΩ, 500VDC
Compressive Strength500VAC/1min
Interpolar Capacitance5pF
LoopSPST (Single Pole Single Throw)
Electrical LifeTested under voltage 24V DC and current 25mA, it can be dialed back and forth about 2000 times
Rated CurrentDoes not Switch Frequently10mA, Withstand Voltage 50V DC
Switch Frequently25mA, Withstand Voltage 24V DC
Weight0.1kg

Dimensions (Unit: mm)

Dimensions of 3 Position 6 Pin SPST DIP Switch

Tips: How to use the DIP switch?

The DIP switch cannot directly control the stepper motor, it needs a stepper driver. The principle of the DIP switch is like the parallel connection of resistors. The number 8421 corresponds to the resistance value of 1/8, 1/4, 1/2, 1 in turn, which can also be measured with a multimeter. The DIP switch is equivalent to a switch value. When it is turned ON, it means it is connected, and when it is OFF it means it is disconnected. In digital circuits, 0 and 1 are usually used for binary output.

Product reviews
Very useful DIP switch
5
Sapello
Avatar
5/30/2022 1:21 AM
These 3 position DIP switches are a good quality unit. For my use, I put these switches into breadboard friendly DIP sockets. They're fine for use on solder-type protoboard.
Was this review helpful? Yes No (0/0)
Just what I needed.
5
Annette
Avatar
6/27/2022 11:59 PM
I ordered these DIP switches because I think they are a great value. These DIP switches are solid construction and compact size. Switch action is firm and has a soft tactile impulse when the switch is opened and closed. I am very happy with them.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews