Dual inline package switch (DIP switch) is designed to hold configurations and select the interrupt request for motherboards or breadboard. This small DIP switch with 12 push buttons also can be used to activate or deactivate different electronic circuits.
Specification
| Model | ATO-DIP-12P | |
| Spacing | 2.54mm | |
| Number of Switch | 12 | |
| Number of Pin | 24 | |
| Maximum Operating Force | 8N | |
| Push Button Stroke | 2mm | |
| Operating Temperature | -20℃~+70℃ | |
| Storage Temperature | -40℃~+85℃ | |
| Contact Resistance | Initial Value: 50MΩ, After Test: 100MΩ | |
| Insulation Resistance | 100MΩ, 500VDC | |
| Compressive Strength | 500VAC/1min | |
| Interpolar Capacitance | 5pF | |
| Loop | SPST (Single Pole Single Throw) | |
| Electrical Life | Tested under voltage 24V DC and current 25mA, it can be dialed back and forth about 2000 times | |
| Rated Current | Does not Switch Frequently | 10mA, Withstand Voltage 50V DC |
| Switch Frequently | 25mA, Withstand Voltage 24V DC | |
| Weight | 0.1kg | |
Dimensions (Unit: mm)

Tips:
Each position of the DIP switch has two pins on the top and bottom of the back. When it is turned to the ON side, the two pins on the bottom are connected. Otherwise, it is disconnected. Each position is independent and not related to each other. This components are mostly used for binary coding.
Product reviews
Best for breadboards.
Danie
4/29/2022 1:16 AM
I order 300 of these DIP switches because I think they are a great value. They are compact, very space-saving and perfect for small workspaces. These DIP switches are very valuable for PCB projects.
Was this review helpful? (0/0)
Compact and practical DIP switch
Hurley
8/12/2026 7:28 PM
Simple and practical DIP switch. It fits well on our PCB and doesn't take up much room. The switches have a good feel when toggling, and everything worked normally after installation.
Was this review helpful? (0/0)
Only registered users can write reviews