3 HP 2.5 Ton Air Cooled Industrial Water Chiller

$5,098.19
3 HP small water chiller machine for cooling system, 2.5 ton cooling capacity, works in three phase four wire 50Hz or 60Hz power supply, 220V/ 380V/ 400V AC voltage are optional. It built in famous brand new compressor and pump, microcomputer control the water temperature and air-coold type condenser provides high heat-exchange efficiency.
SKU: ATO-IWC-3HP
*
*
*
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 8-12 days

2.5 ton air-coold water chiller equipped with 3 HP power compressor, tube-in-shell type evaporator, R22/R407C refrigerant used as standard for efficient cooling. 3-phase 240V/60Hz, 380V/50Hz, 480V/60Hz voltages are available here. Best price industrial water chiller widely used for plastic processing, mechanical molding and module cooling and can improve the surface smoothness of plastic products, so that the products do not shrink or deform.

Features

  • Adopted high-quality compressors and pumps to ensure safe & quiet running, power saving and durable service life.
  • Employed microcomputer with easy operation which can control the temperature within 3℃ to 45℃ precisely.
  • Unique design for condenser and heat-dispersion unit results in excellent heat-exchange effect.
  • Equipped with electrical current overload protection, high & low-pressure switch, and electrical timer delay safety device. It will alarm to display faulty when any malfunction occurs.
  • Built-in stainless steel insulated water tank, durable and easy to clean.
  • Complete safety devices including power reverse phase, power short phase, and anti-freeze protection.
  • Ultra low-temperature type of chiller can reach below -60℃.

Parameter List

ModelATO-LC3A
Cooling Capacity2.5 ton
Number of Compressors1
Compressor Total Power3 HP
RefrigerantR22 / R407C (Optional)
Evaporator TypeTube-in-shell type
Condenser TypeFinned
Cooling TypeAir-cooled
Number of Fans2
Single Fan power0.15 kW
Number of Cooling Water Inlet/Outlet1 group
Cooling Water Inlet/Outlet SizeDN25
Pump Power0.5 HP
Pump Flow100L/min
Pump Lifts22M
Power Supply3-phase 4-wire AC 208V/60Hz, 220V/60Hz, 240V/60Hz, 380V/50Hz, 400V/50Hz, 415V/50Hz, 480V/60Hz (Optional)
Control Voltage1-phase AC 220V (L+N)
Total Power2.9 kW
Wires Specifications4x2.5mm2
Chilled Water Temperature Range5℃~35℃
Inlet/Outlet Water Temperature Difference3℃~8℃
Condensation Temperature≤ 35℃
CertificationCE
DimensionL*W*H=1150*530*1240mm
Net Weight / Gross Weight130kg / 160kg


Shipping Way of ATO Water Chiller

Just confirm the shipping way by email when place your order.

1. Ship by Air: The compressed refrigerant inside the chiller is a dangerous item with the possibility of explosion, so it needs to release the compressed refrigerant before transportation. (It means that water chiller without refrigerant when choosing this shipping way. After the machine arrives at your destination, you need to add refrigerant by local professionals, the process is as simple as adding refrigerant for ordinary air conditioners.) Delivery time is about 15-30 days.

2. Ship by Sea: The transportation time is longer (about 40-55 days), and there is no need to add refrigerant after the equipment arrives at the destination.

Note:

1. The "cooling capacity" is tested based on the inlet and outlet water temperature of freezing is 12℃/7℃, and the inlet and outlet water temperature of cooling is 30℃/35℃.

2. Conversion of units: 1 ton cooling capacity=3024kcal/hr, 1kcal/hr=3.969BTU/hr, 1HP=0.735kW=2580kcal/hr

Evaporator Types

Water chiller evaporator types

Type 1: Water Tank with Coil

  • Integrated Design: The industrial water chiller features a built-in open-top water tank with an integrated coil, providing a compact and self-contained cooling solution.
  • Sealed Circulation: The water circuit operates in a sealed loop, ensuring stable performance and preventing contamination.
  • Direct Connection: The air-cooled water chiller supports direct connection to equipment requiring cooling, with no external tank needed.

Type 2: Shell and Tube

  • Tankless Configuration: This water chiller is designed without an internal water tank and relies on an external open water tank for operation.
  • Application: Specifically suitable for cooling external open water tanks, pools, or reservoirs in industrial and commercial applications.

Water Chiller Structure Diagram

water chiller structure diagram

①Compressor②High-pressure gauge③Condenser④Dry filter
⑤Expansion valve⑥Water supply⑦Evaporator⑧Low-pressure gauge
⑨Water tank⑩Drain⑪Refrigerated water⑫Pump


Tips: Difference between air-cooled chiller and water-cooled chiller?

Industrial chillers are divided into water-cooled industrial chillers and air-cooled industrial chillers. The difference between them is mainly due to the difference of condenser. The condenser of water-cooled chiller takes away heat mainly through circulating cooling water, so the condenser of water-cooled chiller is also commonly called a water cannon. Different from the water-cooled type, the air-cooled industrial chiller uses fan as a heat sink. Generally, the fin-type condenser is used. The fin actually refers to the aluminum sheet. The aluminum sheet is installed outside the part requiring heat exchange to achieve efficient heat dissipation, and then the hot air is extracted by a powerful fan.

Therefore, when the workshop temperature is high, the air-cooled chiller will not only be affected by itself (the high temperature of the condenser will directly lead to the high-pressure alarm of the industrial chiller, and the cooling capacity will decline), but also have a direct impact on the workshop temperature. The water-cooled industrial chiller needs circulating cooling water from cooling tower to cool down, so it is rather complicated to install cooling tower, cooling water circulating pump and pipeline to use the water-cooled chiller. Comparatively speaking, the air-cooled industrial chiller can be easily moved.

How to Fill an Industrial Water Chiller with Refrigeran?

This video shows how to fill an industrial water chiller with refrigerant. The steps for filling a chiller with refrigerant are similar to those for filling an air conditioner with refrigerant, first drain the air and then fill the equipment with refrigerant.

Product reviews
Great 2.5 ton water chiller
5
Keran
Avatar
3/14/2022 11:57 PM
I kept it there for hours no problems while I kicked out tons of work. Keeps the proper temperature once I set it up. Worth every penny. I will recommend this 2.5 ton water chiller to my friends.
Was this review helpful? Yes No (0/0)
Nice 3 HP air cooled industrial water chiller
5
Colleen
Avatar
6/9/2022 12:10 AM
This 3 HP air cooled industrial water chiller is good for my work. The quality of this water chiller is very nice, the best I've ever used. Highly recommend!!
Was this review helpful? Yes No (0/0)
Works Well for Our Cooling System
5
Barrel
Avatar
8/11/2022 2:27 AM
I bought this 3 HP water chiller for our production equipment, and it has worked well since installation. The temperature control is easy to adjust, and the cooling is stable during long working hours. It is not a small unit, but the build quality feels reliable. Overall, this chiller met our needs, and I would consider buying from ATO again for similar equipment.
Was this review helpful? Yes No (0/0)
Outdoor Use
4
Enlis
Avatar
10/10/2025 8:08 PM
Is this 3-horsepower, 2.5-ton industrial air-cooled chiller designed for outdoor installation?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, we do not offer chillers suitable for outdoor use. However, you can construct a rainproof enclosure approximately 3 meters high outdoors and install our chiller underneath it.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

2.5 ton air-coold water chiller equipped with 3 HP power compressor, tube-in-shell type evaporator, R22/R407C refrigerant used as standard for efficient cooling. 3-phase 240V/60Hz, 380V/50Hz, 480V/60Hz voltages are available here. Best price industrial water chiller widely used for plastic processing, mechanical molding and module cooling and can improve the surface smoothness of plastic products, so that the products do not shrink or deform.

Features

  • Adopted high-quality compressors and pumps to ensure safe & quiet running, power saving and durable service life.
  • Employed microcomputer with easy operation which can control the temperature within 3℃ to 45℃ precisely.
  • Unique design for condenser and heat-dispersion unit results in excellent heat-exchange effect.
  • Equipped with electrical current overload protection, high & low-pressure switch, and electrical timer delay safety device. It will alarm to display faulty when any malfunction occurs.
  • Built-in stainless steel insulated water tank, durable and easy to clean.
  • Complete safety devices including power reverse phase, power short phase, and anti-freeze protection.
  • Ultra low-temperature type of chiller can reach below -60℃.

Parameter List

ModelATO-LC3A
Cooling Capacity2.5 ton
Number of Compressors1
Compressor Total Power3 HP
RefrigerantR22 / R407C (Optional)
Evaporator TypeTube-in-shell type
Condenser TypeFinned
Cooling TypeAir-cooled
Number of Fans2
Single Fan power0.15 kW
Number of Cooling Water Inlet/Outlet1 group
Cooling Water Inlet/Outlet SizeDN25
Pump Power0.5 HP
Pump Flow100L/min
Pump Lifts22M
Power Supply3-phase 4-wire AC 208V/60Hz, 220V/60Hz, 240V/60Hz, 380V/50Hz, 400V/50Hz, 415V/50Hz, 480V/60Hz (Optional)
Control Voltage1-phase AC 220V (L+N)
Total Power2.9 kW
Wires Specifications4x2.5mm2
Chilled Water Temperature Range5℃~35℃
Inlet/Outlet Water Temperature Difference3℃~8℃
Condensation Temperature≤ 35℃
CertificationCE
DimensionL*W*H=1150*530*1240mm
Net Weight / Gross Weight130kg / 160kg


Shipping Way of ATO Water Chiller

Just confirm the shipping way by email when place your order.

1. Ship by Air: The compressed refrigerant inside the chiller is a dangerous item with the possibility of explosion, so it needs to release the compressed refrigerant before transportation. (It means that water chiller without refrigerant when choosing this shipping way. After the machine arrives at your destination, you need to add refrigerant by local professionals, the process is as simple as adding refrigerant for ordinary air conditioners.) Delivery time is about 15-30 days.

2. Ship by Sea: The transportation time is longer (about 40-55 days), and there is no need to add refrigerant after the equipment arrives at the destination.

Note:

1. The "cooling capacity" is tested based on the inlet and outlet water temperature of freezing is 12℃/7℃, and the inlet and outlet water temperature of cooling is 30℃/35℃.

2. Conversion of units: 1 ton cooling capacity=3024kcal/hr, 1kcal/hr=3.969BTU/hr, 1HP=0.735kW=2580kcal/hr

Evaporator Types

Water chiller evaporator types

Type 1: Water Tank with Coil

  • Integrated Design: The industrial water chiller features a built-in open-top water tank with an integrated coil, providing a compact and self-contained cooling solution.
  • Sealed Circulation: The water circuit operates in a sealed loop, ensuring stable performance and preventing contamination.
  • Direct Connection: The air-cooled water chiller supports direct connection to equipment requiring cooling, with no external tank needed.

Type 2: Shell and Tube

  • Tankless Configuration: This water chiller is designed without an internal water tank and relies on an external open water tank for operation.
  • Application: Specifically suitable for cooling external open water tanks, pools, or reservoirs in industrial and commercial applications.

Water Chiller Structure Diagram

water chiller structure diagram

①Compressor②High-pressure gauge③Condenser④Dry filter
⑤Expansion valve⑥Water supply⑦Evaporator⑧Low-pressure gauge
⑨Water tank⑩Drain⑪Refrigerated water⑫Pump


Tips: Difference between air-cooled chiller and water-cooled chiller?

Industrial chillers are divided into water-cooled industrial chillers and air-cooled industrial chillers. The difference between them is mainly due to the difference of condenser. The condenser of water-cooled chiller takes away heat mainly through circulating cooling water, so the condenser of water-cooled chiller is also commonly called a water cannon. Different from the water-cooled type, the air-cooled industrial chiller uses fan as a heat sink. Generally, the fin-type condenser is used. The fin actually refers to the aluminum sheet. The aluminum sheet is installed outside the part requiring heat exchange to achieve efficient heat dissipation, and then the hot air is extracted by a powerful fan.

Therefore, when the workshop temperature is high, the air-cooled chiller will not only be affected by itself (the high temperature of the condenser will directly lead to the high-pressure alarm of the industrial chiller, and the cooling capacity will decline), but also have a direct impact on the workshop temperature. The water-cooled industrial chiller needs circulating cooling water from cooling tower to cool down, so it is rather complicated to install cooling tower, cooling water circulating pump and pipeline to use the water-cooled chiller. Comparatively speaking, the air-cooled industrial chiller can be easily moved.

Product reviews
Great 2.5 ton water chiller
5
Keran
Avatar
3/14/2022 11:57 PM
I kept it there for hours no problems while I kicked out tons of work. Keeps the proper temperature once I set it up. Worth every penny. I will recommend this 2.5 ton water chiller to my friends.
Was this review helpful? Yes No (0/0)
Nice 3 HP air cooled industrial water chiller
5
Colleen
Avatar
6/9/2022 12:10 AM
This 3 HP air cooled industrial water chiller is good for my work. The quality of this water chiller is very nice, the best I've ever used. Highly recommend!!
Was this review helpful? Yes No (0/0)
Works Well for Our Cooling System
5
Barrel
Avatar
8/11/2022 2:27 AM
I bought this 3 HP water chiller for our production equipment, and it has worked well since installation. The temperature control is easy to adjust, and the cooling is stable during long working hours. It is not a small unit, but the build quality feels reliable. Overall, this chiller met our needs, and I would consider buying from ATO again for similar equipment.
Was this review helpful? Yes No (0/0)
Outdoor Use
4
Enlis
Avatar
10/10/2025 8:08 PM
Is this 3-horsepower, 2.5-ton industrial air-cooled chiller designed for outdoor installation?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, we do not offer chillers suitable for outdoor use. However, you can construct a rainproof enclosure approximately 3 meters high outdoors and install our chiller underneath it.
Only registered users can write reviews