25A SSR Solid State Relay, 3-32V DC to DC, Din Rail Mount

$72.73
25A Single phase slim SSR solid state relay with heat sink, DC to DC control, din rail mount, input 3-32VDC, output 3-75VDC. High reliability, high efficiency and long lifespan. Widely used in many automatic control systems.
SKU: ATO-SSR-DS25DD
Free Shipping
Delivery date: 6-12 days

Features

25Amps 3-32V DC to DC solid state relay (SSR) features high structural strength, good impact resistance, and strong shock resistance. This kind of relay acts as a switch in the circuit and can control high voltage and high current circuits with low voltage and low current control signals. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Exquisite workmanship
  • Photoelectric isolation
  • SSR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-DS25DD
Voltage TypeDC-DC
Load Current25A
Load Voltage3-75V DC
Control Voltage3-32V DC
Max Input Current12mA
Must Operation Voltage2.8V DC
Must Release Voltage1.5V DC
Max On-stage Voltage Drop≤0.2V
Peak Voltage75V DC
Operation Temperature-20℃ to 80℃
Max Off-state Leakage Current12mA
Dielectric Strength2500V
Weight181g
CertificatesCE, ROHS


Dimension

DC to DC SSR dimension

Wiring Diagram

An example wiring diagram

Tips: Protective measures of solid state relays in terms of electrical noise

Generally speaking, solid state relays do not fail due to electrical noise unless they happen to falsely trigger during a possible high current surge during the line cycle. Oftentimes, failures due to noise are only temporary, such as opening when a solid state relay should be closed, and vice versa.Noise by its nature is difficult to define, it is created by the randomness of contact bounce and motor commutator arcing, etc.

Noise, more correctly defined as Electromagnetic Interference (EMI), affects solid state relays by sending signals into sensitive parts of the circuit, such as thyristors.A built-in snubber RC network across the output can effectively reduce sensitivity to noise, especially at lower frequencies. This is standard for CII AC relays.

What is the Structure of DIN Rail Solid State Relay?

This video introduces the ATO DIN rail solid state relay. The ATO DIN rail solid state relay uses DC control in its circuit and produces a DC output. Single phase design based on zero-crossing switching mechanism. DIN rail mounted with an integrated heat sink to dissipate the heat generated during operation, providing reliable thermal management.

Product reviews
Simple installation
5
Molly
Avatar
10/12/2025 8:19 PM
I’ve been using the 25A SSR Solid State Relay for a few weeks now, and it performs flawlessly. The DC-to-DC control is very stable, and the response time is quick. Installation was simple thanks to the DIN rail mount design, which saved a lot of space in my control cabinet. The built-in heat sink keeps the temperature low even under continuous load, and I can tell it’s built for long-term reliability. Excellent quality and great value for the price — highly recommended for industrial or automation projects.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

25Amps 3-32V DC to DC solid state relay (SSR) features high structural strength, good impact resistance, and strong shock resistance. This kind of relay acts as a switch in the circuit and can control high voltage and high current circuits with low voltage and low current control signals. The SSR offers a reliable switching the commercial and industrial loads, such as computer peripheral interface device, printing machine, molding machine, food machine, packaging machine, and so on.

  • Exquisite workmanship
  • Photoelectric isolation
  • SSR output
  • LED indicator for operation status
  • Removable protective cover for safety
  • Panel mount
  • Zero-crossing switch type

Specification

ModelATO-SSR-DS25DD
Voltage TypeDC-DC
Load Current25A
Load Voltage3-75V DC
Control Voltage3-32V DC
Max Input Current12mA
Must Operation Voltage2.8V DC
Must Release Voltage1.5V DC
Max On-stage Voltage Drop≤0.2V
Peak Voltage75V DC
Operation Temperature-20℃ to 80℃
Max Off-state Leakage Current12mA
Dielectric Strength2500V
Weight181g
CertificatesCE, ROHS


Dimension

DC to DC SSR dimension

Wiring Diagram

An example wiring diagram

Tips: Protective measures of solid state relays in terms of electrical noise

Generally speaking, solid state relays do not fail due to electrical noise unless they happen to falsely trigger during a possible high current surge during the line cycle. Oftentimes, failures due to noise are only temporary, such as opening when a solid state relay should be closed, and vice versa.Noise by its nature is difficult to define, it is created by the randomness of contact bounce and motor commutator arcing, etc.

Noise, more correctly defined as Electromagnetic Interference (EMI), affects solid state relays by sending signals into sensitive parts of the circuit, such as thyristors.A built-in snubber RC network across the output can effectively reduce sensitivity to noise, especially at lower frequencies. This is standard for CII AC relays.

Product reviews
Simple installation
5
Molly
Avatar
10/12/2025 8:19 PM
I’ve been using the 25A SSR Solid State Relay for a few weeks now, and it performs flawlessly. The DC-to-DC control is very stable, and the response time is quick. Installation was simple thanks to the DIN rail mount design, which saved a lot of space in my control cabinet. The built-in heat sink keeps the temperature low even under continuous load, and I can tell it’s built for long-term reliability. Excellent quality and great value for the price — highly recommended for industrial or automation projects.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

10A SSR Solid State Relay, 3-32V DC to DC, Din Rail Mount

ATO-SSR-DS10DD
$71.42
SSR-10DD, Single phase solid state relay with heat sink, 3-32V DC to DC, din rail mount, load current 10A, DC control, input 3-32VDC, output 3-75VDC, suitable for high frequency use. Aluminum heat sink for solid state relay small type, good dissipation, high quality and long service life.

40A SSR Solid State Relay, 3-32V DC to DC, Din Rail Mount

ATO-SSR-DS40DD
$75.74
40A Single phase slim SSR solid state relay with heat sink, DC to DC control, input 3-32VDC, output 3-75VDC, with din rail mount. High reliability, high efficiency and long lifespan. Widely used in many automatic control systems.

60A SSR Solid State Relay, 3-32V DC to DC, Din Rail Mount

ATO-SSR-DS60DD
$77.53
SSR-60A with din rail mount, 3-32V DC to DC, Single phase solid state relay products, with fast switching speed, no spark, no noise, no electromagnetic interference, long service life, no electric shock, strong anti-interference, strong compatibility.

500A DC Reversing Contactor, 2 pole, 12V/24V/48V

ATO-DCCON-R500
$153.19
2 pole DC reversing contactor with 500 amps rated load current, 2NO and 2NC contact form, coil rated voltage with 12V/24V/48V DC available. This economical price DC reversing contactor prevents the motor from running forward and backward simultaneously.

50A DC Reversing Contactor, 2 pole, 12V/24V/48V

ATO-DCCON-R50
$74.31
Two pole DC reversing contacor with 2 sets of switching contacts, 2NO and 2NC form, 50 amps rated load current of contact circuit, coil rated voltage with 12V/24V/48V DC for selection. Cheap price and manufacturer direct sale.