24V DC 2.5A 60W Switching Power Supply

$74.83
Cheap and reliable 24V DC switching power supply with rated power 60W and rated current 2.5A can convert full range AC power to DC, easy to install in DIN rail mount. High quality SMPS can keep the voltage stability with short circuit, overload and overvoltage protection, widely used in LED light strips, communication equipment, electrical devices, etc.
SKU: ATO-SMPS-60-24
Free Shipping
Delivery date: 6-12 days

Features

  • Universal AC input/Full range
  • Protections: short circuit, overload and overvoltage
  • Cooling by free air convection
  • Installed on DIN rail TS-35/7.5 or 15
  • Isolation class Ⅱ
  • LED indicator for power on
  • 100% full load burn-in test

Specification

ModelATO-DR-60-24
Output
DC Voltage24V
Rated Current2.5A
Current Range0 ~ 2.5A
Rated Power60W
Ripple & Noise (Max.)(Note 2)150mVp-p
Voltage Adjust Range21.6 ~ 26.4V
Voltage Tolerance (Note 3)±1.0%
Line Regulation±1.0%
Load Regulation±1.0%
Setup, Rise, Holdup Time100ms, 30ms, 100ms/230V AC    100ms, 30ms, 23ms/115V AC
InputVoltage Range88 ~ 264V AC or 124 ~ 370V DC
Frequency Range47~63Hz
Efficiency (Typ.)84%
AC Current (Typ.)1.2A/115V AC    0.8A/230V AC
Inrush Current (Typ.)Cold start: 18A/115V AC    36A/230V AC
ProtectionOverload105~160% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed.
Overvoltage27.6V ~ 32.4V
Protection type: Shut down output voltage, re-power on to recover.
EnvironmentWorking Temperature-20 ~ +60℃
Working Humidity20~90% RH non-condensing
Storage Temperature-40~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)Safety StandardsUL60950-1, TUV EN60950-1 Approved; Design refer to EN50178
Withstand VoltageI/P-O/P: 3KVAC
Isolation ResistanceI/P-O/P: 100M Ohms/500VDC/25℃/70% RH
EMC EmissionCompliance to EN55022 (CISPR22) Class B, EN61000-3-2, -3
EMC ImmunityCompliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
OthersMTBF≥216.2K hrs MIN. MIL-HDBK-217F (25℃)
Dimension78*93*56mm (W*H*D)
Weight0.3kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Dimensions (Unit: mm)

60W switched mode power supply dimension

Details

60W DC Switching Power Supply Details

Tips: Why should users connect switching power supply to ground?

Ground wiring was introduced as a protective measure to prevent electric or electronic devices from thunder strike. It aims to lead current generated by thunderbolt to ground, so as to protect buildings. At the same time, ground wiring is an effective means to protect personal safety. When phase lines get connected to shells of devices because of certain reasons (such as defective insulation or aging lines), shells of devices will generate voltage which could endanger people's life. However, the current generated by defects of devices can be introduced to ground by PE to protect personal safety. With development of digital communication and other digital areas, functions of ground wiring have stepped beyond its original portfolio of lightning and safety protection. In communication systems, interconnection of devices requires a place to be the benchmark. Electronic devices are becoming more complicated and their signal frequency appears much higher, so noise in signal communication and electromagnetic compatibility must be attached importance. Improper ground wiring may have negative influence on reliability and stability on system operation. Recently, backflow of high-speed signals also introduced the concept of ground wiring.

Product reviews
Stable output
5
EVAA
Avatar
9/8/2025 9:47 PM
I bought this 24V 2.5A 60W switching power supply for a small project, and it has been working flawlessly. The DIN rail installation was quick and simple, and it provides a very stable output without overheating. I’ve been running LED strips and some communication equipment on it, and everything runs smoothly. The built-in protections are a big plus and give me confidence that it will last. For the price, it’s a solid and reliable power supply that I’d definitely recommend.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Features

  • Universal AC input/Full range
  • Protections: short circuit, overload and overvoltage
  • Cooling by free air convection
  • Installed on DIN rail TS-35/7.5 or 15
  • Isolation class Ⅱ
  • LED indicator for power on
  • 100% full load burn-in test

Specification

ModelATO-DR-60-24
Output
DC Voltage24V
Rated Current2.5A
Current Range0 ~ 2.5A
Rated Power60W
Ripple & Noise (Max.)(Note 2)150mVp-p
Voltage Adjust Range21.6 ~ 26.4V
Voltage Tolerance (Note 3)±1.0%
Line Regulation±1.0%
Load Regulation±1.0%
Setup, Rise, Holdup Time100ms, 30ms, 100ms/230V AC    100ms, 30ms, 23ms/115V AC
InputVoltage Range88 ~ 264V AC or 124 ~ 370V DC
Frequency Range47~63Hz
Efficiency (Typ.)84%
AC Current (Typ.)1.2A/115V AC    0.8A/230V AC
Inrush Current (Typ.)Cold start: 18A/115V AC    36A/230V AC
ProtectionOverload105~160% rated output power
Protection type: Constant current limiting, recovers automatically after fault condition is removed.
Overvoltage27.6V ~ 32.4V
Protection type: Shut down output voltage, re-power on to recover.
EnvironmentWorking Temperature-20 ~ +60℃
Working Humidity20~90% RH non-condensing
Storage Temperature-40~+85℃
Storage Humidity10~95% RH non-condensing
Temperature Coefficient±0.03%/℃ (0~50℃)
Vibration10 ~ 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z axes
Safety & EMC (Note 4)Safety StandardsUL60950-1, TUV EN60950-1 Approved; Design refer to EN50178
Withstand VoltageI/P-O/P: 3KVAC
Isolation ResistanceI/P-O/P: 100M Ohms/500VDC/25℃/70% RH
EMC EmissionCompliance to EN55022 (CISPR22) Class B, EN61000-3-2, -3
EMC ImmunityCompliance to EN61000-4-2, 3, 4, 5, 6, 8, 11, EN55024, EN61000-6-2, EN61204-3, heavy industry level, criteria A
OthersMTBF≥216.2K hrs MIN. MIL-HDBK-217F (25℃)
Dimension78*93*56mm (W*H*D)
Weight0.3kg
Note1. All parameters NOT specially mentioned are measured at 230V AC input, rated load and 25°C of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance includes set up tolerance, line regulation and load regulation.
4. The switching power supply is considered a component which will be installed into final equipment. Please make sure that the final equipment still meets EMC directives.

Dimensions (Unit: mm)

60W switched mode power supply dimension

Details

60W DC Switching Power Supply Details

Tips: Why should users connect switching power supply to ground?

Ground wiring was introduced as a protective measure to prevent electric or electronic devices from thunder strike. It aims to lead current generated by thunderbolt to ground, so as to protect buildings. At the same time, ground wiring is an effective means to protect personal safety. When phase lines get connected to shells of devices because of certain reasons (such as defective insulation or aging lines), shells of devices will generate voltage which could endanger people's life. However, the current generated by defects of devices can be introduced to ground by PE to protect personal safety. With development of digital communication and other digital areas, functions of ground wiring have stepped beyond its original portfolio of lightning and safety protection. In communication systems, interconnection of devices requires a place to be the benchmark. Electronic devices are becoming more complicated and their signal frequency appears much higher, so noise in signal communication and electromagnetic compatibility must be attached importance. Improper ground wiring may have negative influence on reliability and stability on system operation. Recently, backflow of high-speed signals also introduced the concept of ground wiring.

Product reviews
Stable output
5
EVAA
Avatar
9/8/2025 9:47 PM
I bought this 24V 2.5A 60W switching power supply for a small project, and it has been working flawlessly. The DIN rail installation was quick and simple, and it provides a very stable output without overheating. I’ve been running LED strips and some communication equipment on it, and everything runs smoothly. The built-in protections are a big plus and give me confidence that it will last. For the price, it’s a solid and reliable power supply that I’d definitely recommend.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews
Customers who bought this item also bought

3 Phase AC Current Transducer 0.5A/1A/2A/5A/10A/20A/50A to 80A

ATO-CUS-3AC80
$161.39
AC current transducer is a special current sensor for 3 phase AC current measurement. Three phase current transducer adopts epoxy resin pouring sealant to ensure the stability of components, with 0.5%FS accuracy, three output signals 4-20mA/0-20mA/0-5V/0-10V, power supply DC 5V/12V/24V, fixed installation. 3 phase AC current transducer is widely used for real-time monitoring of power grid AC current.

3-phase AC Current Transducer, 0-1A/5A/10A/20A

ATO-CUS-AC3
$237.08
Good price 3-phase AC current transducer for sale online, suitable for 0-1A/ 0-5A/0-10A/0-20A AC current input. The accuracy of the three-phase AC current transducer is 0.2/0.5, the response time is less than 400ms, high accuracy and sensitive response. Small size, light weight, easy to install and use.