20A 3-phase EMI Line Filter, 2 Stage

$144.92
3-phase 3-wire or 3-phase 4-wire EMI power line filter in dual-stage configuration, current rating 20 Amp, voltage rating 250/440V AC 50/60Hz, high performance, compact design, great EMI filter for servo system, motor drives, etc.
SKU: ATO-EMI-2020
*
Free Shipping
Delivery date: 8-12 days

20A dual-stage EMI power line filter for 3-phase 3-wire or 3-phase 4-wire AC power system, features compact, easy to install and excellent performance, which is widely used in servo system, automation equipment and machine tools, including 3 phase motor drives, printing equipment, packaging equipment, textile equipment, industrial air conditioners, UPS, communication equipment, etc.

Specification

ModelATO-MT720-20ATO-MT820-20
Configuration2 Stage2 Stage
Rated Current @ 40℃20A20A
Rated Voltage250/440V AC440V AC
Operating Frequency50/60Hz50/60Hz
PhaseThree Phase Three WireThree Phase Four Wire
Leakage Current (250VAC 50Hz @ 20℃)≤4.0mA≤2.0mA
Filter Range150KHz-30MHz150KHz-30MHz
Hipot Rating (one minute)Line to Line: 2250VDC 3S
Line to Ground: 2700VDC 3S
Line to Line: 2250V DC
Line to Neutral: 1760V DC
Line to Ground: 2700V DC
Climatic Category25/085/2125/085/21
Working Temperature-25°C~+85°C-25°C~+85°C
Output TermainalThreaded studThreaded stud
Weight1kg1kg
DimensionSee belowSee below

Dimensions (Unit: mm)

  • 3-phase 3-wire line filter

20A 3-phase EMI Line Filter Dimension

  • 3-phase 4-wire line filter

10A 20A 3-Phase 4-Wire EMI Power Line Filter Dimension

Electrical Schematic

  • 3-phase 3-wire line filter

3-phase 2-stage Power Line Filter Electrical Schematic

  • 3-phase 4-wire line filter

10A 3-Phase 4-Wire EMI Power Line Filter Electrical Schematic

Tips: Band pass filter vs. band stop filter

1. Definition & performance

  • Band pass filter: allows certain frequency band signal to pass through, and restrains lower or higher than the certain frequency band signal, interference and noise.
  • Band stop filter: restrains certain frequency band signal and allows signals outside the certain frequency band to pass through.

2. Working principle

A perfect band pass filter should has a complete flat pass band without amplification or attenuation in the pass band, and all frequency outside pass band would be attenuated completely. Besides, the conversion outside pass band will be completed within very small frequency range. Actually, no perfect band pass filter existed. Filter can’t attenuate all frequency outside the expected frequency range completely, especially outside the requested pass band there is an attenuated but not insulated range. This is usually called filter roll down phenomenon, and expressed with attenuation fluctuation dB value of every 10 times frequency. Usually, filter design would try to guarantee roll down range as narrow as possible, in the case filter performance will get closer to design. But, with the roll down range getting smaller, pass band will no longer flat, starting to appear “ripple”. This phenomenon is obvious at pass band edge, which is called Gibbs phenomenon. Band stop filter can pass most frequency component, attenuating the certain range frequency component to extremely low level. It’s opposite with band pass filter definition. Among them, notch filter is a special band stop filter, whose stop band range is very small, and has very high Q factor.

Single Phase and Three Phase EMI Power Line Filters

In this video, basic information and installation guidelines for single phase and three phase EMI power line filters are presented.

Product reviews
The line filter arrived in a timely manner.
5
Shane
Avatar
1/25/2019 7:40 PM
The line filter arrived in a timely manner and I’m using it now. I cut down line noise for the drive from other devices. It appears to be effective and the device seems to run more smoothly.
Was this review helpful? Yes No (0/0)
Do you provide split phase, 2 hot line EMI filter?
5
Dale
Avatar
10/19/2020 7:04 PM
Do you provide split phase, 2 hot line EMI filter?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately No. Only 1-phase and 3-phase configuration.
About the filter
5
Neilno
Avatar
4/16/2025 7:58 PM
Hi, can you provide me with a filter rated at 20 amps, 120 volts?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, we do not offer filters rated at 120 volts, 20 amps.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

20A dual-stage EMI power line filter for 3-phase 3-wire or 3-phase 4-wire AC power system, features compact, easy to install and excellent performance, which is widely used in servo system, automation equipment and machine tools, including 3 phase motor drives, printing equipment, packaging equipment, textile equipment, industrial air conditioners, UPS, communication equipment, etc.

Specification

ModelATO-MT720-20ATO-MT820-20
Configuration2 Stage2 Stage
Rated Current @ 40℃20A20A
Rated Voltage250/440V AC440V AC
Operating Frequency50/60Hz50/60Hz
PhaseThree Phase Three WireThree Phase Four Wire
Leakage Current (250VAC 50Hz @ 20℃)≤4.0mA≤2.0mA
Filter Range150KHz-30MHz150KHz-30MHz
Hipot Rating (one minute)Line to Line: 2250VDC 3S
Line to Ground: 2700VDC 3S
Line to Line: 2250V DC
Line to Neutral: 1760V DC
Line to Ground: 2700V DC
Climatic Category25/085/2125/085/21
Working Temperature-25°C~+85°C-25°C~+85°C
Output TermainalThreaded studThreaded stud
Weight1kg1kg
DimensionSee belowSee below

Dimensions (Unit: mm)

  • 3-phase 3-wire line filter

20A 3-phase EMI Line Filter Dimension

  • 3-phase 4-wire line filter

10A 20A 3-Phase 4-Wire EMI Power Line Filter Dimension

Electrical Schematic

  • 3-phase 3-wire line filter

3-phase 2-stage Power Line Filter Electrical Schematic

  • 3-phase 4-wire line filter

10A 3-Phase 4-Wire EMI Power Line Filter Electrical Schematic

Tips: Band pass filter vs. band stop filter

1. Definition & performance

  • Band pass filter: allows certain frequency band signal to pass through, and restrains lower or higher than the certain frequency band signal, interference and noise.
  • Band stop filter: restrains certain frequency band signal and allows signals outside the certain frequency band to pass through.

2. Working principle

A perfect band pass filter should has a complete flat pass band without amplification or attenuation in the pass band, and all frequency outside pass band would be attenuated completely. Besides, the conversion outside pass band will be completed within very small frequency range. Actually, no perfect band pass filter existed. Filter can’t attenuate all frequency outside the expected frequency range completely, especially outside the requested pass band there is an attenuated but not insulated range. This is usually called filter roll down phenomenon, and expressed with attenuation fluctuation dB value of every 10 times frequency. Usually, filter design would try to guarantee roll down range as narrow as possible, in the case filter performance will get closer to design. But, with the roll down range getting smaller, pass band will no longer flat, starting to appear “ripple”. This phenomenon is obvious at pass band edge, which is called Gibbs phenomenon. Band stop filter can pass most frequency component, attenuating the certain range frequency component to extremely low level. It’s opposite with band pass filter definition. Among them, notch filter is a special band stop filter, whose stop band range is very small, and has very high Q factor.

Product reviews
The line filter arrived in a timely manner.
5
Shane
Avatar
1/25/2019 7:40 PM
The line filter arrived in a timely manner and I’m using it now. I cut down line noise for the drive from other devices. It appears to be effective and the device seems to run more smoothly.
Was this review helpful? Yes No (0/0)
Do you provide split phase, 2 hot line EMI filter?
5
Dale
Avatar
10/19/2020 7:04 PM
Do you provide split phase, 2 hot line EMI filter?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately No. Only 1-phase and 3-phase configuration.
About the filter
5
Neilno
Avatar
4/16/2025 7:58 PM
Hi, can you provide me with a filter rated at 20 amps, 120 volts?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, we do not offer filters rated at 120 volts, 20 amps.
Only registered users can write reviews
Customers who bought this item also bought

6A EMI Power Line Filter, 1 Phase

ATO-EMI-2106
$80.25
6 Amp single-phase single-stage power line filter, rated voltage 115/250V AC 50/60Hz, general purpose EMI/RFI filter for various electrical equipment, electronics and devices with its competitive price and high performance.