2.2 kW Water Cooled CNC Spindle Motor, 24000 rpm, ER20

$327.69
2.2 kW water-cooled spindle motor for CNC router, it has ER20 collect, high speed of 24000 rpm, 0.85 Nm torque, and needs to be used with VFD. High-quality 3pcs bearings (7005Cx2 + 7002Cx1), runout off less than 0.02mm, tapered bore less than 0.01mm.
SKU: ATO-SPINDLE-W2200
*
*
Free Shipping
Delivery date: 6-12 days

2.2 kW water-cooled CNC spindle motor for sale at low price, 24000 rpm speed, 0.85 Nm torque, 400Hz frequency, 3 phase 220V/380V AC operating voltage, ER20 (φ3.175 mm - φ13 mm) collet.

Feature

  • Spindle motor with superior durability ER20 collet ensures smooth running.
  • Fast response, strong overload capacity, low noise, and high mechanical precision.
  • High-quality 3 pcs bearings (7005Cx2 + 7002Cx1), runout off less than 0.01mm, tapered bore less than 0.005mm.
  • P4 grade ceramic ball bearings are used as spindle bearings, which improves the service life under high-speed revolution.
  • Lubricated with grease, which is resistant to 200 degrees high temperature.
  • Tight sealing and two-layer dustproof design.

Application

This series of air-cooled electric spindle motors is designed primarily for use with variable frequency drives or engraving machines, as well as CNC routers. It is ideal for high-speed profiling, drilling, cutting, engraving, and groove milling across a variety of materials, including wood, metal, plastics, foam, and rubber.

Note: Ensure that the spindle motor and VFD are compatible. The VFD’s specifications and parameter settings must align with the spindle motor’s nominal parameters. Incorrect settings can lead to spindle motor damage or burnout.

Specification

ModelSTZ80-2.2-ER20
Power2.2 kW
Diameterφ80 mm
PhaseThree phase
Speed24000 rpm
Voltage3-phase 380V±10% AC3-phase 220V±10% AC
Current4.2A8.0A
Matched VFD ModelGK3000-4T0037G (5 hp three phase VFD)GK3000-4T0037G (5 hp three phase VFD)
Frequency400Hz
Torque0.85 Nm
Number of Pole2 poles
Cooling TypeWater-cooled
Installation MethodHorizontally or Vertically (When the motor is installed, the radial runout standard is required to be within 5um, and the chuck is generally 10um-15um.)
LubricationGrease
Thermal ClassClass F
Protection ClassIP50
CertificationCE
WarrantyBearings for half a year, other parts for one year
Joint of NoseER20 (φ3.175 mm - φ13mm)
Bearings Type7005C P4*2 & 7002C P4*1
ApplicationWoodworking & Plastic
Weight5 kg
PDFDownload Attachments2.2 kW Water Cooled Spindle Motor CAD Drawings

Details

2200W Water Cooled CNC Spindle Motor Details

Tips: Spindle Motor Bearing Maintenance

We should check the quality of the bearings from time to time during the use of the spindle motor. Under what circumstances do the bearings of the spindle motor have to be replaced?

1. The high noise of the spindle motor may be because the bearing is broken. The bearing is the core component of the high-speed rotation of the spindle motor. The bearing has abnormal noise, which is the lack of oil in the bearing raceway. If the sound is a little loud, you can still use it. But at this time the spindle motor is working, you should pay attention to increasing the circulating water volume to improve the cooling effect, try not to run for a long time, work for a period of time, should stop to cool down.

2. If the spindle motor vibrates, do not continue to use it. On the one hand, it affects the machining accuracy. On the other hand, the motor vibrates, which indicates that the balls of the bearing have been severely worn, and it is easy to wear the bearing seat. Moreover, if you continue to use the motor at this time, it will easily cause the bearing to heat up, and the temperature will easily cause the bearing to stop operating and even burn the coil. In the case of the vibration of the spindle motor, it must be used with caution.

Safety Tips for Using ATO CNC Spindle Motors

1. The electric spindle motor and VFD shall be suitable with each other. The specifications and parameter settings of the VFD shall match the nominal parameters of the spindle motor, and it will burn the spindle motor if the settings are not correct.

2. Before using water-cooled spindle motor, it shall ensure that cooling cycle system works normally and the running under no cooling conditions is prohibited. The volume of cooling water is calculated as per 1 liter/minute, the minimum flow of cooling water is not less than 5 liter/minute, cooling water pipe and the nozzle shall be connected reliably and there is no leakage.

3. The cooling liquid shall be clean and free of grease and the temperature shall be within 5-30℃. The cooling medium shall carry out force cooling when the ambient temperature is higher than 30℃. The precision lathe requires the cooling liquid with a constant temperature of 20 +/-2℃.

4. During storage and transport of the spindle motor, the status of high-speed grease inside the bearing will change. The user shall run it at a low speed first by starting from the lowest speed of the spindle motor for 30 minutes and then 20 minutes for every 3000 rounds. Otherwise there will have abnormal sound, noise, heat and other phenomena, which will affect the bearing life if the spindle motor is started directly at a high speed. During long term storage, the spindle motor shall run (at low speed) for 15-30 minutes once a week at least.

5. Collet, nut and inner taper hole shall be washed clean when installing blades on the spindle motor in order to avoid any impact on the precision. The blade handle shall be inserted into the collet more than 15mm.

6. For daily machining, the spindle motor shall be warmed up, run for 15-20 minutes when the machining speed is reached and then performs precise machining. It is better to stop the spindle motor for two hours every day in order to recover its mechanical fatigue and prolong its life time.

7. No knocking the end cover of the spindle motor. No hammering the collet and blade head when removing blades. No shocking or colliding during transport, storage and using, especially the end of the spindle motor.

8. The spindle motor shall run in designated direction.

9. The spindle motor shall be installed and fixed according to the relevant drawings and instructions.

10. The temperature shall be within 22-25℃ if water cooling machine is used.

11. The spindle motor adopts vapor lock and the gas source shall not be used until it has passed oil-water separator and dry filter. The air pressure is 0.2-0.25Mpa and the filtering precision is 5μm, otherwise there will cause damages to the bearing.

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Product reviews
Nice spindle
5
Armada
Avatar
10/31/2019 7:17 PM
This spindle motor arrived on time. It works perfectly and is almost completely silent. In fact, it is so silent compared to my cnc router that I almost forgot I had it on. It is water cooled so it takes some minor additional work to set it up. But the work is worth the effort.
Was this review helpful? Yes No (0/0)
Cooling method of CNC spindle motor
5
Hvmass
Avatar
6/17/2021 12:14 AM
Hi, does your CNC spindle motor of model: ATO-SPINDLE-2200W comes with a mount? How do you water cool it?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, its without mounting base, and the cooling water is connected to the water nozzle through the cooling water pipe for cooling.
How is this 2.2kW water-cooled CNC spindle motor cooled?
5
Odwalla
Avatar
11/14/2021 11:37 PM
Hi, does your CNC spindle motor model: ATO-SPINDLE-2200W comes with a mount. How do you water cool it?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, it's without mounting base, and the cooling water is connected to the water nozzle through the cooling water pipe for cooling.
Continuous operation time
4
Kenty
Avatar
9/21/2026 12:20 AM
Regarding the ATO-SPINDLE-W2200: Should the spindle be capable of running continuously for at least 48 hours—likely not at full load—and is this feasible? Also, is it possible to remove the stator while keeping the bearings inside the housing?
Was this review helpful? Yes No (0/0)
ATO Responded
This spindle motor cannot run continuously for 48 hours; its limit is 8 hours, and the bearings are prone to failure. It is not possible to remove the stator while retaining the bearings within the housing.
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

2.2 kW water-cooled CNC spindle motor for sale at low price, 24000 rpm speed, 0.85 Nm torque, 400Hz frequency, 3 phase 220V/380V AC operating voltage, ER20 (φ3.175 mm - φ13 mm) collet.

Feature

  • Spindle motor with superior durability ER20 collet ensures smooth running.
  • Fast response, strong overload capacity, low noise, and high mechanical precision.
  • High-quality 3 pcs bearings (7005Cx2 + 7002Cx1), runout off less than 0.01mm, tapered bore less than 0.005mm.
  • P4 grade ceramic ball bearings are used as spindle bearings, which improves the service life under high-speed revolution.
  • Lubricated with grease, which is resistant to 200 degrees high temperature.
  • Tight sealing and two-layer dustproof design.

Application

This series of air-cooled electric spindle motors is designed primarily for use with variable frequency drives or engraving machines, as well as CNC routers. It is ideal for high-speed profiling, drilling, cutting, engraving, and groove milling across a variety of materials, including wood, metal, plastics, foam, and rubber.

Note: Ensure that the spindle motor and VFD are compatible. The VFD’s specifications and parameter settings must align with the spindle motor’s nominal parameters. Incorrect settings can lead to spindle motor damage or burnout.

Specification

ModelSTZ80-2.2-ER20
Power2.2 kW
Diameterφ80 mm
PhaseThree phase
Speed24000 rpm
Voltage3-phase 380V±10% AC3-phase 220V±10% AC
Current4.2A8.0A
Matched VFD ModelGK3000-4T0037G (5 hp three phase VFD)GK3000-4T0037G (5 hp three phase VFD)
Frequency400Hz
Torque0.85 Nm
Number of Pole2 poles
Cooling TypeWater-cooled
Installation MethodHorizontally or Vertically (When the motor is installed, the radial runout standard is required to be within 5um, and the chuck is generally 10um-15um.)
LubricationGrease
Thermal ClassClass F
Protection ClassIP50
CertificationCE
WarrantyBearings for half a year, other parts for one year
Joint of NoseER20 (φ3.175 mm - φ13mm)
Bearings Type7005C P4*2 & 7002C P4*1
ApplicationWoodworking & Plastic
Weight5 kg
PDFDownload Attachments2.2 kW Water Cooled Spindle Motor CAD Drawings

Details

2200W Water Cooled CNC Spindle Motor Details

Tips: Spindle Motor Bearing Maintenance

We should check the quality of the bearings from time to time during the use of the spindle motor. Under what circumstances do the bearings of the spindle motor have to be replaced?

1. The high noise of the spindle motor may be because the bearing is broken. The bearing is the core component of the high-speed rotation of the spindle motor. The bearing has abnormal noise, which is the lack of oil in the bearing raceway. If the sound is a little loud, you can still use it. But at this time the spindle motor is working, you should pay attention to increasing the circulating water volume to improve the cooling effect, try not to run for a long time, work for a period of time, should stop to cool down.

2. If the spindle motor vibrates, do not continue to use it. On the one hand, it affects the machining accuracy. On the other hand, the motor vibrates, which indicates that the balls of the bearing have been severely worn, and it is easy to wear the bearing seat. Moreover, if you continue to use the motor at this time, it will easily cause the bearing to heat up, and the temperature will easily cause the bearing to stop operating and even burn the coil. In the case of the vibration of the spindle motor, it must be used with caution.

Product reviews
Nice spindle
5
Armada
Avatar
10/31/2019 7:17 PM
This spindle motor arrived on time. It works perfectly and is almost completely silent. In fact, it is so silent compared to my cnc router that I almost forgot I had it on. It is water cooled so it takes some minor additional work to set it up. But the work is worth the effort.
Was this review helpful? Yes No (0/0)
Cooling method of CNC spindle motor
5
Hvmass
Avatar
6/17/2021 12:14 AM
Hi, does your CNC spindle motor of model: ATO-SPINDLE-2200W comes with a mount? How do you water cool it?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, its without mounting base, and the cooling water is connected to the water nozzle through the cooling water pipe for cooling.
How is this 2.2kW water-cooled CNC spindle motor cooled?
5
Odwalla
Avatar
11/14/2021 11:37 PM
Hi, does your CNC spindle motor model: ATO-SPINDLE-2200W comes with a mount. How do you water cool it?
Was this review helpful? Yes No (0/0)
ATO Responded
Unfortunately, it's without mounting base, and the cooling water is connected to the water nozzle through the cooling water pipe for cooling.
Continuous operation time
4
Kenty
Avatar
9/21/2026 12:20 AM
Regarding the ATO-SPINDLE-W2200: Should the spindle be capable of running continuously for at least 48 hours—likely not at full load—and is this feasible? Also, is it possible to remove the stator while keeping the bearings inside the housing?
Was this review helpful? Yes No (0/0)
ATO Responded
This spindle motor cannot run continuously for 48 hours; its limit is 8 hours, and the bearings are prone to failure. It is not possible to remove the stator while retaining the bearings within the housing.
Only registered users can write reviews
Customers who bought this item also bought

4.5 kW Air Cooled CNC Spindle Motor, 18000 rpm, ER32

ATO-SPINDLE-A4500
$705.88
Hot sale 4.5kW air cooled spindle motor for CNC router with high speed of 18000 rpm, ER32 collet, 2.27 Nm holding torque, works at 380V AC 300Hz, 4pcs P4 grade ceramic ball bearings which improves the service life under high speed revolution.