15hp (11kW) 3-Phase Asynchronous Motor with Clutch

$7,893.71
Three phase 380V asynchronous motor with clutch with 15hp, speed adjustable range 150-125rpm, rated torque 69.1Nm, speed changing rate is 3%. Factory price 3 phase asynchronous motor with clutch has optimum structure, low noise, simple operation, and high protection class.
SKU: ATO-AMWC-11000W
*
Ship to
*
*
Shipping Method
Name
Estimated Delivery
Price
No shipping options
Delivery date: 10-20 days

15hp/11kW synchronous motor with clutch at affordable price, running at 380V 50Hz, IP grade IP21, the altitude is less than 1000m and ambienttemperature is -15℃-+40℃.

15hp (11kW) 3 Phase Asynchronous Motor with Clutch Specification

ModelATO-YCT225-4A
Capacity11kW
Rated Torque69.1Nm
Speed adjustable Range1250-125r/min
Speed Changing Rate3%
Rated Voltage380V
InstallationB3
Frequency50Hz
Phase3 phase
CertificationCE, CCC, IS9001, IS2008
IP GradeIP21
EfficiencyIE1/IE2/IE3
FrameCast Iron or aluminum
Weight420kg
Ambient temperature-15℃~40℃
Altitudenot exceeding 1000 Meters
DutyContinuous running
Insulation GradeB
Warranty1 year

15hp (11kW) 3 Phase Asynchronous Motor with Clutch Dimensions


3 phase asynchronous motor dimensions3 phase asynchronous motor dimensions3 phase asynchronous motor dimensions

Details

11000w Asynchronous Motor with Clutch Details

Tips: How to Check and Maintain the 15hp (11kW) 3-Phase Asynchronous Motor with Clutch?

A. The motor cannot rotate after power is applied, but there is no strange sound, no smell and smoke.
1. Cause of failure
① power is not on (at least two phases are not on).
②Fuse fused (at least two phases fused).
③ overcurrent relay is set too small.
④ control equipment wiring errors.
2. Troubleshooting
① check the power circuit switch, fuse, junction box at whether there are broken points, repair.
② Check the fuse type, the reason for fusing, and change the new fuse.
③Adjust the relay adjustment value to match the motor.
④ Correct the wiring.
B. The motor no-load current is not balanced, the three-phase phase difference is large
1、Cause of failure
①When rewinding, the number of turns of stator three-phase winding is not equal.
② Wrong winding head and tail end connection.
(iii) unbalanced power supply voltage.
④There is a short circuit between turns of the winding, coil reversal and other faults.
2. Troubleshooting
① re-wind the sub-winding.
②Check and correct.
③ Measure the power supply voltage and try to eliminate the imbalance.
④Clear the winding fault.

Three-phase Motor to Single-phase (380V to 220V)
If a frequency converter is beyond your budget or availability, one way to run a three-phase motor from single-phase power is to use capacitors. In this tutorial, the step-by-step process of adapting a motor for single-phase operation is demonstrated by showing the correct capacitor sizing and wiring configuration.

In this video we've guided you through how to do VFD control wiring with a self-lock push button switch to run the motor in forward direction. We've covered everything from wiring to programming and even a test run. So just watch it through and hope you'll find it informative and helpful.

Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

15hp/11kW synchronous motor with clutch at affordable price, running at 380V 50Hz, IP grade IP21, the altitude is less than 1000m and ambienttemperature is -15℃-+40℃.

15hp (11kW) 3 Phase Asynchronous Motor with Clutch Specification

ModelATO-YCT225-4A
Capacity11kW
Rated Torque69.1Nm
Speed adjustable Range1250-125r/min
Speed Changing Rate3%
Rated Voltage380V
InstallationB3
Frequency50Hz
Phase3 phase
CertificationCE, CCC, IS9001, IS2008
IP GradeIP21
EfficiencyIE1/IE2/IE3
FrameCast Iron or aluminum
Weight420kg
Ambient temperature-15℃~40℃
Altitudenot exceeding 1000 Meters
DutyContinuous running
Insulation GradeB
Warranty1 year

15hp (11kW) 3 Phase Asynchronous Motor with Clutch Dimensions


3 phase asynchronous motor dimensions3 phase asynchronous motor dimensions3 phase asynchronous motor dimensions

Details

11000w Asynchronous Motor with Clutch Details

Tips: How to Check and Maintain the 15hp (11kW) 3-Phase Asynchronous Motor with Clutch?

A. The motor cannot rotate after power is applied, but there is no strange sound, no smell and smoke.
1. Cause of failure
① power is not on (at least two phases are not on).
②Fuse fused (at least two phases fused).
③ overcurrent relay is set too small.
④ control equipment wiring errors.
2. Troubleshooting
① check the power circuit switch, fuse, junction box at whether there are broken points, repair.
② Check the fuse type, the reason for fusing, and change the new fuse.
③Adjust the relay adjustment value to match the motor.
④ Correct the wiring.
B. The motor no-load current is not balanced, the three-phase phase difference is large
1、Cause of failure
①When rewinding, the number of turns of stator three-phase winding is not equal.
② Wrong winding head and tail end connection.
(iii) unbalanced power supply voltage.
④There is a short circuit between turns of the winding, coil reversal and other faults.
2. Troubleshooting
① re-wind the sub-winding.
②Check and correct.
③ Measure the power supply voltage and try to eliminate the imbalance.
④Clear the winding fault.

Only registered users can write reviews