150mm Displacement Measurement Sensor for crusher

$1,218.89
Aluminum alloy rail type magnetostrictive displacement sensor for measuring linear displacement, external installation, compact structure, easy to use, good security, suitable for crusher and other CNC machinery worked in large vibration.
SKU: ATO-MSR-A0150
*
Free Shipping
Delivery date: 6-12 days

Non contact linear displacement sensor with measuring range 150mm has a aluminum alloy rail. Its electronic head parts are all built into aluminum alloy shell. Magnetostrictive displacement sensors have effective travel 50mm~35000mm, can bewidely used in all kinds of CNC machinery that always working in large vibration.

Specification:

ModelATO-CTH-A-150
Measuring Range150mm
Output Signal0~5V/ 0~10V/ 0~20mA/ 4~20mA (Optional)
Linearity≤±0.05%FS
Repeatability≤±0.005%FS
ResolutionInfinite resolution (depending on controller AD and power supply ripple)
Hysteresis≤0.001%FS
Temperature Drift≤0.001%FS
Operating Voltage24VDC
Current Draw5~16mA
Vibration5g/10-2000Hz/IEC Standard IEC Standard 68-2-6
Temperature-40°C~+85°C
Load CharacteristicsVoltage output load resistance ≥3KΩ
Current output load resistance ≤1KΩ
Connection TypeSlide type or magnetic levitation type
Protection ClassIP65

Dimensional drawing (unit: mm):

magnetostrictive sensor rail type dimensional drawing-a
Installation diagram:

magnetostrictive sensor rail type installation drawing

Tips: Wiring of magnetostrictive sensor
Three lines of the linear displacement sensor cannot connected in a wrong way. Meanwhile, the power and output lines can't be exchanged. If connected incorrectly, large linear error will be caused. However, it is very difficult to control it. Further, the control accuracy will be poor. In addition, situations including jumping phenomenon of the display will emerge easily. If the display data jumps regularly or there is no display data, the technician should check whether the insulation of connecting wire is broken, and judge whether the short circuit of earthing is caused for it contacts the shell of the machine regularly.

In this video, ATO will simply show you how to connect linear displacement sensor and digital panel meter.

In this video, ATO will simply show you how to connect linear displacement sensor and digital panel meter.

Product reviews
Easy Installation
5
Alden
Avatar
9/17/2026 6:49 PM
I used the 150mm sensor on a CNC machine with noticeable vibration. It was easy to install and has been giving stable displacement readings during operation.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Non contact linear displacement sensor with measuring range 150mm has a aluminum alloy rail. Its electronic head parts are all built into aluminum alloy shell. Magnetostrictive displacement sensors have effective travel 50mm~35000mm, can bewidely used in all kinds of CNC machinery that always working in large vibration.

Specification:

ModelATO-CTH-A-150
Measuring Range150mm
Output Signal0~5V/ 0~10V/ 0~20mA/ 4~20mA (Optional)
Linearity≤±0.05%FS
Repeatability≤±0.005%FS
ResolutionInfinite resolution (depending on controller AD and power supply ripple)
Hysteresis≤0.001%FS
Temperature Drift≤0.001%FS
Operating Voltage24VDC
Current Draw5~16mA
Vibration5g/10-2000Hz/IEC Standard IEC Standard 68-2-6
Temperature-40°C~+85°C
Load CharacteristicsVoltage output load resistance ≥3KΩ
Current output load resistance ≤1KΩ
Connection TypeSlide type or magnetic levitation type
Protection ClassIP65

Dimensional drawing (unit: mm):

magnetostrictive sensor rail type dimensional drawing-a
Installation diagram:

magnetostrictive sensor rail type installation drawing

Tips: Wiring of magnetostrictive sensor
Three lines of the linear displacement sensor cannot connected in a wrong way. Meanwhile, the power and output lines can't be exchanged. If connected incorrectly, large linear error will be caused. However, it is very difficult to control it. Further, the control accuracy will be poor. In addition, situations including jumping phenomenon of the display will emerge easily. If the display data jumps regularly or there is no display data, the technician should check whether the insulation of connecting wire is broken, and judge whether the short circuit of earthing is caused for it contacts the shell of the machine regularly.

Product reviews
Easy Installation
5
Alden
Avatar
9/17/2026 6:49 PM
I used the 150mm sensor on a CNC machine with noticeable vibration. It was easy to install and has been giving stable displacement readings during operation.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews