Application: High-speed dome, children intelligent toys, stage lights, drones, robots, stabilizer, smart home appliance…
Features
- Compact design, other outer diameters of 6.5mm~30mm can be customized.
- Adopt advanced processing technology for key materials, military level gold-gold contacts points ensure ultra-low contact resistance and long working life.
- Low torque, low loss, low electrical noise, maintenance free.
Specification
| Model | ATO-MNTSR-M125 |
| Outer Diameter | 12.5mm |
| Rotating Speed | 250 rpm |
| Working Temp. | -30℃~80℃ |
| Working Humidity | 0~85% RH |
| Contact Material | gold-gold |
| Housing Material | plastic |
| Torque | 0.05N.m (+0.01N.m/6 circuits) |
| Working Life | 10 millions for ref (depends on working conditions) |
| Rated Voltage | 0~240VAC/VDC |
| Lnsulation Resistance | ≥300MΩ/300VDC |
| Lead Wire Spec. | refer to model list |
| Lead Wire Length | standard 150mm (can be customized) |
| Certification | CE, RoHS |
| Dielectric Strength | 300VAC@50Hz,60s |
| Electrical Noise | <0.01Ω |
| IP Grade | IP51 |
Dimension Drawing of 12.5mm Miniature Slip Ring (Type A Flange)

Dimension Drawing of 12.5mm Miniature Slip Ring (Type C Flange)

Dimension Drawing of 12.5mm Miniature Slip Ring (No Flange)

Standard Model List
| Model | Number of Circuits Wires | Max current/wire | Lead spec. | Length L (mm) |
| ATO-MNTSR-M125-06 | 6 | 1.5A | AWG30#teflon,silver plated | 13.5 |
| ATO-MNTSR-M125-12 | 12 | 1.5A | AWG30#teflon,silver plated | 18.2 |
| ATO-MNTSR-M125-18 | 18 | 1.5A | AWG30#teflon,silver plated | 23.5 |
| ATO-MNTSR-M125-0205 | 2 | 5A | AWG22#teflon,silver plated | 13.5 |
| ATO-MNTSR-M125-0305 | 3 | 5A | AWG22#teflon,silver plated | 18.2 |
| ATO-MNTSR-M125-0405 | 4 | 5A | AWG22#teflon,silver plated | 18.2 |
Color Code of Lead Wire
| ring # | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 |
| color | BLK | BRN | RED | ORG | YEL | GRN | BLU | PUR | GRY | WHT | PINK | LGT BLU |
| ring # | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | 21 | 22 | 23 | 24 |
| color | WHT/BLK | WHT/BRN | WHT/RED | WHT/ORG | WHT/YEL | WHT/GRN | WHT/BLU | WHT/PUR | WHT/GRY | BLK/RED | BLK/BRN | Transparent |
Tips: Miniature Slip Ring Installation
- Place the cap of the miniature slip ring on the bushing of the instrument to be installed.
- Fix the miniature slip ring rotor part. The miniature slip ring has very low torque, so the rotor does not need to be fixed. Just wire the wires.
- Fix the miniature slip ring stator part. Tighten the screws on the flange of the slip ring so that the cap of the slip ring is attached to the device and remains fixed at all times.

Product reviews
High cost performance slip ring
Mark
4/20/2020 7:21 PM
Outer diameter of the slip ring is very suitable. It is installed on a rotating LED display, conductive effect is very good. There is no flashing or poor contact phenomenon after a long time of operation. The extra wires can power the supporting equipment. High cost performance.
Was this review helpful? (0/0)
What’s the diameter of this one?
HIghtower
1/8/2024 12:56 AM
What’s the diameter of this one? Additionally, could you please make sure that there is no resistance change during the operation? Because we work on data acquisition from force sensors, so slight change in the resistance might tamper our data.
Was this review helpful? (0/0)
Only registered users can write reviews
Customers who bought this item also bought
Electrical Miniature Slip Ring, 4/6/8/12 Wires, 1A, 6.5mm
ATO-MNTSR-065
$71.38
Electrical miniature slip ring for sale has outer diameter of 6.5mm. Standard model is available in 4-wire, 6-wire, 8-wire, and 12-wire and the maximum current per channel is 1A. Other combinations of wire count and current are customizable. Installation method is no-flange installation.
Miniature Slip Ring Connector, 22mm, 2-36 Wires, 2A/5A/10A/30A
ATO-MNTSR-220
$72.92
Miniature slip ring connector uses a capsule design with 22mm outer diameter. Transmission circuit of standard model can select 2A/5A/10A/30A per wire, the number of circuits are optional in 2 wires~36 wires. Other currents and circuits quantities are customizable. Mounting method is A-type flange or no flange.