10 kg·cm (1 Nm) RC Servo Motor, 6V/ 7.4V/ 8.4V

$123.19
10 kg·cm (1 Nm) digital RC servo motor for sale, selectable voltage of 6V/ 7.4V/ 8.4V, stall torque 7.5kg·cm, 10kg·cm or 11.5kg·cm. This radio control servo motor is widely used in robotics, RC cars, airplanes, drones, and other mechanical systems requiring precise control of position, speed, and torque.
SKU: ATO-SERVO-RC10
*
Free Shipping
Delivery date: 6-12 days

10 kg·cm torque remote control servo with 7.4V operating voltage is ideal for medium-duty applications like controlling robotic arms, steering mechanisms, and controlling movement in small to medium-sized mechanical systems.

Specification

ModelATO-FT3329M
Electrical SpecificationOperating Voltage6V7.4V8.4V
No Load Speed0.105sec/60° (95 rpm)0.083sec/60° (120 rpm)0.071sec/60° (140 rpm)
Running Current (No Load)100mA120mA135mA
Stall Torque (at Locked)7.5kg·cm10kg·cm11.5kg·cm
104.33oz. in139.11oz. in159.98oz. in
Stall Current (at Locked)2500mA3000mA3300mA
Idle Current (at Stopped)6mA6mA6mA
Input Voltage4V-9V
Rated Torque2.4kg·cm3.3kg·cm3.8kg·cm
Rated Current800mA1000mA1100mA
Mechanical SpecificationSize30*10*35.7mm
Limit AngleNo Limit
Case MaterialAluminum
Gear MaterialMetal Gear
Bearing TypeBall Bearings
Angle SensorTypeCarbon-Film Potentiometer
Connector & CableTypeJR
MaterialPVC
Length25cm
Pin Definition1: Signal; 2: Vcc; 3: GND
Weight28.3g ±1g
Horn Type25T/ 4.95mm
Gear Ratio1/252
Back Lash≤1.0°
Rocker Phantom0°
Rocker ScrewM2.3*5
MotorCoreless Motor
Storage Temperature Range-30℃ ~ 80℃
Operating Temperature Range-20℃ ~ 60℃
Temperature Range25℃ ± 5 ℃
Humidity Range65% ± 10%
CertificateEMC, ROHS
Control SpecificationCommand SignalPulse Width Modification (PWM)
Control System TypeDigital Comparator
Operating Travel250° (at 500 to 2500 μsec)
Left & Right Travelling Angle deviation≤5°
Centering Deviation≤2°
Neutral Position1500 μsec
Dead Band Width≤8 μsec
Rotating DirectionCounterclockwise (at 1500 to 2000 μsec)
Pulse Width Range500 to 2500 μsec
Reliability TestingLife Test>100000 Times
Motor Noises50 ± 5dB
Servo Noises70 ± 5dB


Dimensions (Unit: mm)

Dimensions of 10kg.cm Micro RC Servo Motor

Tips: How to choose an RC servo motor?

Choosing the right radio control servo motor depends on several factors, including the application, required torque, and speed. Here are some tips:

  • Torque: Determine the amount of torque needed for your project. Higher torque servos are required for heavy-duty applications like robotics or large RC vehicles. Check the servo's torque rating (usually in kg-cm or oz-in).
  • Speed: Consider how fast the servo needs to move. Speed is often given in seconds per 60 degrees of movement. Faster servos are better for high-speed applications.
  • Voltage and Compatibility: Ensure the servo's voltage is compatible with your power supply. Most remote control servos work with 4.8V to 6V, but some high-performance models may require higher voltages.
  • Size and Weight: Make sure the servo fits within the space constraints of your project and doesn’t add unnecessary weight.
  • Durability: Choose a digital RC servo with good build quality and materials (e.g., metal gears) if the application demands high durability.
Product reviews
Powerful power, precise control
5
Olly
Avatar
3/3/2025 12:13 AM
It has strong power and can easily handle various high load tasks. Whether used in robotics projects or other situations that require strong torque, it performs excellently. The response speed is extremely fast, and the command can be responded to almost instantly after being issued, ensuring precise control effect. Moreover, its operation is very smooth with almost no noise, which is a huge advantage for application scenarios that require a quiet environment.
Was this review helpful? Yes No (0/0)
Great little servo motor
5
Smith
Avatar
4/30/2026 2:29 AM
I run it at 7.4V on a robot arm, getting 10 kg·cm torque and decent speed. Metal gears hold up well, centering is consistent, and it runs smooth. Solid choice for RC or robotics.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

10 kg·cm torque remote control servo with 7.4V operating voltage is ideal for medium-duty applications like controlling robotic arms, steering mechanisms, and controlling movement in small to medium-sized mechanical systems.

Specification

ModelATO-FT3329M
Electrical SpecificationOperating Voltage6V7.4V8.4V
No Load Speed0.105sec/60° (95 rpm)0.083sec/60° (120 rpm)0.071sec/60° (140 rpm)
Running Current (No Load)100mA120mA135mA
Stall Torque (at Locked)7.5kg·cm10kg·cm11.5kg·cm
104.33oz. in139.11oz. in159.98oz. in
Stall Current (at Locked)2500mA3000mA3300mA
Idle Current (at Stopped)6mA6mA6mA
Input Voltage4V-9V
Rated Torque2.4kg·cm3.3kg·cm3.8kg·cm
Rated Current800mA1000mA1100mA
Mechanical SpecificationSize30*10*35.7mm
Limit AngleNo Limit
Case MaterialAluminum
Gear MaterialMetal Gear
Bearing TypeBall Bearings
Angle SensorTypeCarbon-Film Potentiometer
Connector & CableTypeJR
MaterialPVC
Length25cm
Pin Definition1: Signal; 2: Vcc; 3: GND
Weight28.3g ±1g
Horn Type25T/ 4.95mm
Gear Ratio1/252
Back Lash≤1.0°
Rocker Phantom0°
Rocker ScrewM2.3*5
MotorCoreless Motor
Storage Temperature Range-30℃ ~ 80℃
Operating Temperature Range-20℃ ~ 60℃
Temperature Range25℃ ± 5 ℃
Humidity Range65% ± 10%
CertificateEMC, ROHS
Control SpecificationCommand SignalPulse Width Modification (PWM)
Control System TypeDigital Comparator
Operating Travel250° (at 500 to 2500 μsec)
Left & Right Travelling Angle deviation≤5°
Centering Deviation≤2°
Neutral Position1500 μsec
Dead Band Width≤8 μsec
Rotating DirectionCounterclockwise (at 1500 to 2000 μsec)
Pulse Width Range500 to 2500 μsec
Reliability TestingLife Test>100000 Times
Motor Noises50 ± 5dB
Servo Noises70 ± 5dB


Dimensions (Unit: mm)

Dimensions of 10kg.cm Micro RC Servo Motor

Tips: How to choose an RC servo motor?

Choosing the right radio control servo motor depends on several factors, including the application, required torque, and speed. Here are some tips:

  • Torque: Determine the amount of torque needed for your project. Higher torque servos are required for heavy-duty applications like robotics or large RC vehicles. Check the servo's torque rating (usually in kg-cm or oz-in).
  • Speed: Consider how fast the servo needs to move. Speed is often given in seconds per 60 degrees of movement. Faster servos are better for high-speed applications.
  • Voltage and Compatibility: Ensure the servo's voltage is compatible with your power supply. Most remote control servos work with 4.8V to 6V, but some high-performance models may require higher voltages.
  • Size and Weight: Make sure the servo fits within the space constraints of your project and doesn’t add unnecessary weight.
  • Durability: Choose a digital RC servo with good build quality and materials (e.g., metal gears) if the application demands high durability.
Product reviews
Powerful power, precise control
5
Olly
Avatar
3/3/2025 12:13 AM
It has strong power and can easily handle various high load tasks. Whether used in robotics projects or other situations that require strong torque, it performs excellently. The response speed is extremely fast, and the command can be responded to almost instantly after being issued, ensuring precise control effect. Moreover, its operation is very smooth with almost no noise, which is a huge advantage for application scenarios that require a quiet environment.
Was this review helpful? Yes No (0/0)
Great little servo motor
5
Smith
Avatar
4/30/2026 2:29 AM
I run it at 7.4V on a robot arm, getting 10 kg·cm torque and decent speed. Metal gears hold up well, centering is consistent, and it runs smooth. Solid choice for RC or robotics.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews