100mm Linear Displacement Sensor for Injection Machine

$929.86
Magnetostrictive linear displacement sensor for injection machine, high precision, no temperature drift, anti-jamming performance, long life, high temperature resistance, corrosion resistance, high pressure resistant.
SKU: ATO-MSD-0100
Free Shipping
Delivery date: 6-12 days

Magnetostrictive linear displacement sensor with measuring range 100mm is used for liquid level preset and feedback, such as the liquid level of injection machine hydro-cylinder. Magnetostrictive sensors also can be used in most industrial automation systems.

Specification:

BasicsModelATO-MSD-0100
Measuring range0~100 mm
Shipping weight1 kg
Length299.3 mm
Diameter51 mm
Technical parametersLinearity≤0.03%FS
Repeatability≤0.003%FS
Resolution ratio≤0.001%FS
Hysteresis≤0.001%FS
Working Voltage24V /12V DC
Working currentVoltage /digital output type≤16mA; Current output type≤35mA
Output method0~5V / 0~10V / 4~20mA / 0-20mA RS485 binary digital signal / SSI gray code signal
Product typeNormal type; Explosion-proof type; Anti-corrosion type
Measuring rod material0Cr18Ni9 (304) or 316L stainless steel (secial custom-made)
Measuring rod diameterФ10mm
Electronic bin material1Cr18Ni9 (304)
304 and PTFE casing outside (Anti-corrosion type, special custom-made)
1Cr18Ni9Ti and protection cover outside (Anti-corrosion type, special custom-made)
Connecting screw threadM18×1.5; M20×1.5; 3/4-16UNF
Type of lead wirePVC shielded cable; aviation plug (not applicable to explosion-proof type)
Measuring rod pressure40MPa, 70MPa (Explosion-proof type)
TemperatureT1: 0~+ 70℃, T2: -25~+80℃, T3: -40~+120℃
Buffer areaFront-end of buffer 50.8mm (electronic bin), the end of the buffer 63.5mm (the buffer area can be custom-made)
Vibration100g, IEC standards 68-2-715g /10-2000Hz IEC standards 68-2-6
Protection ClassIP67
Explosion-proof levelExplosion-proof type: EXd II BT5

Installation diagram (unit: mm):
1. PG7 connection
magnetostrictive sensor with PG7 connection
2. Explosion-proof connection
magnetostrictive sensor with explosion-proof connection
3. External installation
magnetostrictive sensor external installation
Tips: Magnetostrictive sensor vs Potentiometer
In the earlier stage, potentiometer is widely applied into injection molding machine. However, no matter its accuracy, reliability, stroke and service life is not better than that of magnetostrictive displacement sensor. Because the potentiometer is contact-type, carbon brush will be inevitably worn after repeatedly used for a long time and ultimately invalid. However, magnetostrictive displacement sensor features non-contact, no wear, durability, simple installation and compact appearance. So it possesses more incomparable technical advantages than potentiometer.

In this video, ATO will simply show you how to connect linear displacement sensor and digital panel meter.

Product reviews
Precision and stability
5
Mrthos
Avatar
11/23/2023 11:19 PM
This 100mm linear displacement sensor provides excellent performance for injection molding machines. Its accuracy and stability ensures a highly refined injection process that effectively boosts productivity. This is a reliable device for applications that require tight control of injection molding machine displacement.
Was this review helpful? Yes No (0/0)
So glad we switched to this sensor
5
Dexter
Avatar
8/13/2026 6:52 PM
We were having trouble with position feedback on our injection machine using cheaper sensors. This one solved it. The 0.001% resolution is excellent and the readings are stable even with hydraulic vibration. Installation was simple with the M18 thread. The stainless rod looks well made. Very happy with this sensor.
Was this review helpful? Yes No (0/0)
Write your review
  • Only registered users can write reviews
*
*
  • Bad
  • Excellent
*
*
*
*

Magnetostrictive linear displacement sensor with measuring range 100mm is used for liquid level preset and feedback, such as the liquid level of injection machine hydro-cylinder. Magnetostrictive sensors also can be used in most industrial automation systems.

Specification:

BasicsModelATO-MSD-0100
Measuring range0~100 mm
Shipping weight1 kg
Length299.3 mm
Diameter51 mm
Technical parametersLinearity≤0.03%FS
Repeatability≤0.003%FS
Resolution ratio≤0.001%FS
Hysteresis≤0.001%FS
Working Voltage24V /12V DC
Working currentVoltage /digital output type≤16mA; Current output type≤35mA
Output method0~5V / 0~10V / 4~20mA / 0-20mA RS485 binary digital signal / SSI gray code signal
Product typeNormal type; Explosion-proof type; Anti-corrosion type
Measuring rod material0Cr18Ni9 (304) or 316L stainless steel (secial custom-made)
Measuring rod diameterФ10mm
Electronic bin material1Cr18Ni9 (304)
304 and PTFE casing outside (Anti-corrosion type, special custom-made)
1Cr18Ni9Ti and protection cover outside (Anti-corrosion type, special custom-made)
Connecting screw threadM18×1.5; M20×1.5; 3/4-16UNF
Type of lead wirePVC shielded cable; aviation plug (not applicable to explosion-proof type)
Measuring rod pressure40MPa, 70MPa (Explosion-proof type)
TemperatureT1: 0~+ 70℃, T2: -25~+80℃, T3: -40~+120℃
Buffer areaFront-end of buffer 50.8mm (electronic bin), the end of the buffer 63.5mm (the buffer area can be custom-made)
Vibration100g, IEC standards 68-2-715g /10-2000Hz IEC standards 68-2-6
Protection ClassIP67
Explosion-proof levelExplosion-proof type: EXd II BT5

Installation diagram (unit: mm):
1. PG7 connection
magnetostrictive sensor with PG7 connection
2. Explosion-proof connection
magnetostrictive sensor with explosion-proof connection
3. External installation
magnetostrictive sensor external installation
Tips: Magnetostrictive sensor vs Potentiometer
In the earlier stage, potentiometer is widely applied into injection molding machine. However, no matter its accuracy, reliability, stroke and service life is not better than that of magnetostrictive displacement sensor. Because the potentiometer is contact-type, carbon brush will be inevitably worn after repeatedly used for a long time and ultimately invalid. However, magnetostrictive displacement sensor features non-contact, no wear, durability, simple installation and compact appearance. So it possesses more incomparable technical advantages than potentiometer.

Product reviews
Precision and stability
5
Mrthos
Avatar
11/23/2023 11:19 PM
This 100mm linear displacement sensor provides excellent performance for injection molding machines. Its accuracy and stability ensures a highly refined injection process that effectively boosts productivity. This is a reliable device for applications that require tight control of injection molding machine displacement.
Was this review helpful? Yes No (0/0)
So glad we switched to this sensor
5
Dexter
Avatar
8/13/2026 6:52 PM
We were having trouble with position feedback on our injection machine using cheaper sensors. This one solved it. The 0.001% resolution is excellent and the readings are stable even with hydraulic vibration. Installation was simple with the M18 thread. The stainless rod looks well made. Very happy with this sensor.
Was this review helpful? Yes No (0/0)
Only registered users can write reviews