Offering up to 1000A DC output at 0–10V, this adjustable DC power supply is suited to applications requiring exceptionally high current at low voltage. The 10kW output capacity, stable regulation, low ripple, and independent voltage/current adjustment make it suitable for industrial power systems and high-current testing.
Specification
| Model | ATO-JK101000K |
| Input Voltage | Single Phase AC 110V (±10%) Three-Phase AC 220V (±10%) |
| Input Frequency | 50/60 Hz |
| Output Voltage | DC 0–10V |
| Output Current | 0–1000A |
| Output Power | 10 KW |
| Power Supply Stability | ≤0.5% + 10 mV |
| Load Regulation | ≤0.5% + 30 mV |
| Ripple | ≤1% + 10 mV RMS |
| Voltage Display | 3½-digit digital meter; Accuracy: ±0.3% FS + 1 digit (1%–100% of rated value); Display range: 00.0–10.0V |
| Current Display | 3½-digit digital meter; Accuracy: ±0.3% FS + 1 digit (1%–100% of rated value); Display range: 00.0–1000.0A |
| Insulation Resistance | Input-Output: ≥20 MΩ; Input-Case: ≥20 MΩ; Output-Case: ≥80 MΩ |
| Dielectric Strength | Input-Output: AC 1500V, 10mA, 1 minute; Input-Case: AC 1500V, 10mA, 1 minute; Output-Case: AC 1500V, 10mA, 1 minute |
| Overvoltage Protection | Built-in OVP; protection threshold: rated output voltage +5% |
| Overcurrent Protection | Constant-current output under overload and short-circuit conditions |
| Overtemperature Protection | Built-in OTP; protection threshold: 85°C ±5°C (heatsink temperature) |
| Voltage and Current Adjustment | Potentiometer |
| Output Polarity | Positive (+) and negative (-) outputs can be grounded independently |
| Cooling Method | Forced-Air Cooling |
| Operating Environment | Indoor use; Temperature: -10°C–40°C; Humidity: 10%–85% RH |
| Storage Environment | Temperature: -20–70°C; Humidity: 10%–90% RH |
| Dimensions | 700 × 460 × 300 mm (L × W × H) |
| Weight | 45kg |
Note: All values are typical and may vary under different load conditions or operating circumstances. Accuracy is measured under load-side voltage sensing conditions. Deviations from rated values may occur due to temperature variations and component aging.
Feature
- 1000A DC Output: Reaches a maximum output current of 1000A across the 0–10V DC range, meeting the requirements of low-voltage, high-current power applications.
- 10kW Rated Power: A 10kW output rating accommodates substantial current demand for industrial equipment and high-current DC testing.
- Independent Adjustment: Separate potentiometer controls make voltage and current adjustment straightforward for different load conditions.
- Clear Meter Readings: Dual 3½-digit digital meters show output voltage and current, featuring ±0.3% FS + 1 digit accuracy for reliable operating reference.
- Stable Power Regulation: Low ripple, power supply stability of ≤0.5% + 10mV, and load regulation of ≤0.5% + 30mV help maintain consistent DC output from the variable DC power supply.
- Safety Protection: Built-in OVP, constant-current overcurrent protection, and OTP help prevent damage caused by abnormal loads and excessive temperature.
Detail
Front

Back
Size (unit: mm)

Tips: How Does Load Type Affect DC Power Supply Selection?
Different loads can place very different demands on a DC power supply. Resistive loads are generally straightforward, while motors, capacitors, batteries, and other dynamic loads may produce startup surges or changing current demand. Consider the load's normal and peak requirements, startup behavior, and response to current limiting before selecting an adjustable DC power supply. This helps ensure stable operation and prevents unnecessary stress on the connected equipment.